cve
Veille des vulnérabilités Archive complète
identifiantvulnérabilitésévéritépublié
CVE-2026-72354In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in MFT writeback
ntfs_write_mft_block() maps each $MFT record through the $MFT data
runlist. For sub-folio clusters it looks up a struct runlist_element under
ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn
when choosing folio_sz.
That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT
allocation extension can merge a replacement runlist under the same lock,
and ntfs_rl_realloc() can free the old backing array. If that happens
between the lookup and the later folio_sz decision, writeback can
dereference freed runlist storage.
The buggy scenario involves two paths, with each column showing the order
within that path:
MFT writeback path: $MFT allocation extension:
1. Look up rl under 1. Extend the $MFT data allocation.
ni->runlist.lock. 2. Publish a replacement runlist.
2. Drop ni->runlist.lock. 3. Free the old runlist array.
3. Read rl->length and rl->vcn
to choose folio_sz.
Compute the remaining run length while ni->runlist.lock is still held, and
use that scalar after unlock. This preserves the existing folio sizing
decision without carrying a borrowed runlist_element across the lock
boundary.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_mft_writepages+0x1c8d/0x1fb0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_mft_writepages+0x1c8d/0x1fb0
kasan_report+0xe0/0x110
? ntfs_mft_writepages+0x1c8d/0x1fb0
ntfs_mft_writepages+0x1c8d/0x1fb0
? __pfx_ntfs_mft_writepages+0x10/0x10
? __pfx___mutex_unlock_slowpath+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? iput+0x92/0xa80
do_writepages+0x219/0x530
? __pfx_do_writepages+0x10/0x10
__writeback_single_inode+0x117/0xf50
? do_raw_spin_lock+0x130/0x270
? __pfx_do_raw_spin_lock+0x10/0x10
? __pfx___writeback_single_inode+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
writeback_sb_inodes+0x65b/0x1810
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? __pfx_writeback_sb_inodes+0x10/0x10
? lock_release+0x1e0/0x280
? _raw_spin_unlock+0x23/0x40
? move_expired_inodes+0x2b8/0x850
__writeback_inodes_wb+0xf4/0x270
? __pfx___writeback_inodes_wb+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? queue_io+0x2e4/0x410
wb_writeback+0x666/0x880
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_wb_writeback+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? get_nr_dirty_inodes+0x1c/0x170
wb_workfn+0x75e/0xbb0
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x27/0x60
? __pfx_wb_workfn+0x10/0x10
? __pfx_debug_object_deactivate+0x10/0x10
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0x1e0/0x280
process_one_work+0x8d0/0x1870
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x575/0xf80
? __pfx_worker_thread+0x10/0x10
kthread+0x2e7/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x576/0x810
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x57e/0xe10
? __switch_to_asm+0x33/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 970:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3c/0x80
ntfs_runlists_merge+0x1212/0x3010
ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40
ntfs_mft_record_alloc+0x1ab4/0x4f10
__ntfs_create+0x680/0x2e50
ntfs_create+0x1e6/0x3a0
path_openat+0x2b55/0x3c10
do_file_open+0x1f4/0x460
do_sys_openat2+0xde/0x170
__x64_sys_openat+0x122/0x1e0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1294:
kasan_save_
---truncated---Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72355In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix barriering when walking subrequest list
Fix the barriering used when walking the subrequest list in retry as
there's a possibility of seeing a subreq that's just been added by the
application thread.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72356In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix missing credit release on failure in cifs_issue_read()
Fix missing release of credits in the failure path in cifs_issue_read()
lest retrying the subreq just overwrites the credits value.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72357In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72358In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e)Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72360In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
(cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a)Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-72364In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writeback error handling
Fix the error handling in writeback_iter() loop. If an error occurs,
writeback_iter() needs to be called again with *error set to the error so
that it can clean up iteration state. Further, the current folio needs
unlocking and redirtying.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72366In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_create_write_req() to handle async cache object creation
netfs_create_write_req() will skip caching if the fscache cookie is
disabled, but this is a problem because async cache object creation might
not have got far enough yet that has been enabled - thereby causing the
call to fscache_begin_write_operation() to be skipped.
Fix this by removing the checks on the cookie and delegating this to
fscache_begin_write_operation().Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72367In the Linux kernel, the following vulnerability has been resolved:
iomap: guard io_size EOF trim against concurrent truncate underflow
iomap: fix zero padding data issue in concurrent append writes
changed ioend accounting so that io_size tracks only valid data
within EOF. This trims io_size when a writeback range extends
past end_pos:
ioend->io_size += map_len;
if (ioend->io_offset + ioend->io_size > end_pos)
ioend->io_size = end_pos - ioend->io_offset;
However, if end_pos ends up below ioend->io_offset, the subtraction
becomes negative and is stored in size_t io_size, causing an unsigned
wrap to a huge value. This can happen when writeback continues past
byte-level EOF up to a block-aligned range, or when a concurrent
truncate shrinks the file after end_pos was sampled in
iomap_writeback_handle_eof().
A wrapped io_size can mislead append detection and corrupt
completion-time size handling, since filesystem end_io paths consume
io_size for decisions such as on-disk EOF updates and unwritten/COW
completion ranges.
Fix this by clamping io_size to zero when EOF has moved to or before
the ioend start offset. This preserves the original intent of trimming
io_size to valid in-EOF data while avoiding the underflow.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72368In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double unlock in nomem_d_alloc error path
When start_creating() fails and returns -ENOMEM, it has already
released the parent directory lock in __start_dirop():
static struct dentry *__start_dirop(...)
{
...
inode_lock_nested(dir, I_MUTEX_PARENT);
dentry = lookup_one_qstr_excl(name, parent, lookup_flags);
if (IS_ERR(dentry))
inode_unlock(dir); <-- Lock released on error
return dentry;
}
However, the nomem_d_alloc error path in cachefiles_get_directory()
unconditionally calls inode_unlock(d_inode(dir)) again, causing a
double unlock that corrupts the rwsem state.
This is a leftover from commit 7ab96df840e60 which replaced manual
locking with start_creating() but failed to update the nomem_d_alloc
path (while correctly updating mkdir_error and lookup_error paths).Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72369In the Linux kernel, the following vulnerability has been resolved:
minix: avoid overflow in bitmap block count calculation
minix_check_superblock() uses minix_blocks_needed() to verify that the
on-disk imap and zmap block counts are large enough for the advertised
inode and zone counts.
The helper currently performs DIV_ROUND_UP() in unsigned int arithmetic.
A Minix v3 image can set s_ninodes or s_zones near UINT_MAX so the
addition inside DIV_ROUND_UP() wraps to zero. That makes a zero imap/zmap
block count look valid, after which minix_fill_super() can dereference
s_imap[0] or s_zmap[0] even though no bitmap buffers were allocated.
Impact: mounting a crafted Minix v3 image whose s_ninodes or s_zones is
near UINT_MAX makes minix_check_superblock() accept a zero bitmap-block
count and minix_fill_super() dereference s_imap[0]/s_zmap[0], panicking
the kernel.
The divisor is the bitmap capacity in bits, blocksize * 8, which is
always a power of two: minix_fill_super() obtains the block size through
sb_set_blocksize(), and blk_validate_block_size() rejects any size that
is not a power of two. Use DIV_ROUND_UP_POW2(), which divides before
adding the round-up term and so cannot overflow for a power-of-two
divisor.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72371In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the volume AFS_VOLUME_RM_TREE is set on
Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume
replaced, not the new volume, as it's now removed from the cell's volume
tree. This will cause the old volume to be removed from the tree twice and
the new volume never to be removed.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72372In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lack of locking around modifications of net->cells_dyn_ino
Fix the lack of locking around modifications of net->cells_dyn_ino by
taking net->cells_lock exclusively. This also requires to cell to be
removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in
afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping
locks cannot be taken there.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72373In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing NULL pointer check in afs_break_some_callbacks()
Fix afs_break_some_callbacks() to check to see if afs_lookup_volume_rcu()
returned NULL (e.g. the specified volume is unknown).Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72374In the Linux kernel, the following vulnerability has been resolved:
afs: Fix callback service message parsers to pass through -EAGAIN
The AFS filesystem client uses an rxrpc server to listen for callback
notifications. Each callback call type handler has a delivery function
that parses the incoming request stream, and this should return -EAGAIN the
last packet hasn't yet been seen, but all currently queued received data is
consumed. afs_extract_data() does this, but the -EAGAIN return is switched
to 0 inadvertantly
Fix callback service message parsers to pass through -EAGAINAnalyse NVD en cours Élevée CVSS 7.5 CVE-2026-72375In the Linux kernel, the following vulnerability has been resolved:
afs: Fix reinitialisation of the inode, in particular ->lock_work
It seems that initalising afs_vnode::lock_work a single time in the slab's
init function isn't sufficient for work_structs. This results in the
DEBUG_OBJECTS debugging stuff producing a warning occasionally when running
the generic/131 xfstest:
ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220
WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695
...
CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT
...
RIP: 0010:debug_print_object+0x65/0x90
...
Call Trace:
<TASK>
? __pfx_afs_lock_work+0x10/0x10
debug_object_activate+0x122/0x170
insert_work+0x25/0x60
__queue_work+0x2e0/0x340
queue_delayed_work_on+0x48/0x70
afs_fl_release_private+0x57/0x70
locks_release_private+0x5c/0xa0
locks_free_lock+0xe/0x20
posix_lock_inode+0x55f/0x5b0
locks_lock_inode_wait+0x81/0x140
? file_write_and_wait_range+0x50/0x70
afs_lock+0xcd/0x110
fcntl_setlk+0x10d/0x260
do_fcntl+0x24e/0x5b0
__do_sys_fcntl+0x6a/0x90
do_syscall_64+0x11e/0x310
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fix this by reinitialising ->lock_work after allocating an inode.
Also, flush ->lock_work when the inode is being evicted to make sure it's
not still running.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72378In the Linux kernel, the following vulnerability has been resolved:
afs: Fix error code in afs_extract_vl_addrs()
The error codes on these paths are only set on the first iteration
through the loop. Set the correct error code on every iteration.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72380In the Linux kernel, the following vulnerability has been resolved:
xen/pvcalls: bound backend response req_id before indexing rsp[]
pvcalls_front_event_handler() takes req_id directly from the
backend-supplied ring response and uses it to index the fixed-size
bedata->rsp[] array for a memcpy() and a store, with no range check. A
malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING
and drive an out-of-bounds write past the bedata allocation.
req_id was also declared int while the wire field rsp->req_id is u32, so
a range check on the signed value alone is insufficient: a backend
req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING
test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single
bound covers both ends.
A backend that sends an out-of-range req_id has violated the wire
protocol, so rather than silently dropping the response, log once and
stop trusting the backend: set bedata->disabled. The event handler then
ignores further responses, and the request paths that wait for a
response return -EIO instead of blocking forever. This mirrors the
fatal-error handling xen-netback uses (xenvif_fatal_tx_err()).
The pvcalls frontend currently trusts its backend, so this is not a
classic-Xen security issue, but it matters for hardening PV frontends
against malicious backends (confidential and disaggregated deployments).Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72381In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72382In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject undersized DACLs before parsing ACEs
parse_dacl() limits the attacker-controlled ACE count by comparing it
with the number of minimal ACEs that fit in the DACL size. The DACL size
field is 16 bits, but the expression subtracts sizeof(struct smb_acl).
Because sizeof() is unsigned, a DACL size smaller than the ACL header
underflows to a large size_t.
A malicious client can reach this with:
SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY)
-> smb2_set_info_sec()
-> set_info_sec()
-> parse_sec_desc()
-> parse_dacl()
-> init_acl_state(..., 0xffff)
-> init_acl_state(..., 0xffff)
-> kmalloc_objs(..., 0xffff)
Thus a malformed security descriptor can make num_aces pass the guard
and drive large temporary ACL state and pointer-array allocations.
Reject DACLs smaller than struct smb_acl before doing the subtraction,
so the ACE count check cannot be bypassed by the underflow.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72383In the Linux kernel, the following vulnerability has been resolved:
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72389In the Linux kernel, the following vulnerability has been resolved:
bridge: stp: Fix a potential use-after-free when deleting a bridge
The three STP timers are not supposed to be armed while the bridge is
administratively down. They are synchronously deactivated when the
bridge is put administratively down and the various call sites check for
'IFF_UP' before arming them.
This check is missing from br_topology_change_detection() and it is
possible to engineer a situation in which the topology change timer is
armed while the bridge is administratively down, resulting in a
use-after-free [1] when the bridge is deleted.
Fix by adding the missing check and for good measures synchronously
shutdown the three timers when the bridge is deleted.
[1]
ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72390In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
The teql master->slaves singly linked list is not protected against
multiple writes. It can be mod'ed concurently from teql_master_xmit(),
teql_dequeue(), teql_init() and teql_destroy() without holding any list
lock or RCU protection.
[email protected] has demonstrated that the qdisc is freed
after an RCU grace period, but teql_master_xmit() running on another
CPU can still hold a stale pointer into the list, resulting in a
slab-use-after-free:
BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0
Read of size 8 at addr ffff888013fb0440 by task poc/332
Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512)
The fix?
Add a per-master slaves_lock spinlock that serializes all mutations of
master->slaves and the NEXT_SLAVE() links in teql_destroy() and
teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock
around those updates.
Annotate master->slaves and the per-slave ->next pointer with __rcu and
use the appropriate RCU accessors everywhere they are touched:
rcu_assign_pointer() on the writer side (under slaves_lock),
rcu_dereference_protected() for the writer-side loads (also under
slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and
rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(),
which run under RTNL.
Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list
traversal in teql_master_xmit(), so that readers either observe a fully
linked list or are deferred until the in-flight mutation completes. The two
early-return paths in teql_master_xmit() are updated to release the RCU-bh
read-side critical section before returning, since leaving it held would
disable BH on that CPU for good.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72393In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: don't cache shinfo across skb realloc
fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb
including the shared info. We can't use the pointer calculated
before the call.
BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0
Read of size 4 at addr ff110000262edd98 by task swapper/5/0
Call Trace:
fbnic_tx_lso.isra.0+0x668/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
Allocated by task 8653:
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xcc/0x6c0
sock_alloc_send_pskb+0x327/0x3f0
__ip_append_data+0x188b/0x47a0
ip_make_skb+0x24a/0x300
udp_sendmsg+0x14d2/0x21e0
Freed by task 0:
kfree+0x123/0x5a0
pskb_expand_head+0x36c/0xfa0
fbnic_tx_lso.isra.0+0x500/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
sch_direct_xmit+0x25b/0x1100
The buggy address belongs to the object at ff110000262edc40
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 344 bytes inside of
freed 640-byte region [ff110000262edc40, ff110000262edeAnalyse NVD en cours Critique CVSS 9.8 CVE-2026-72395In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72397In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72398In the Linux kernel, the following vulnerability has been resolved:
sctp: add INIT verification after cookie unpacking
In SCTP handshake, the INIT chunk is initially processed by the server
and embedded into the cookie carried in INIT-ACK. The client then
returns this cookie via COOKIE-ECHO, where the server unpacks it and
reconstructs the original INIT chunk.
When cookie authentication is enabled, the cookie contents are protected
against tampering, so reusing the unpacked INIT without re-verification
is safe.
However, when cookie authentication is disabled, the reconstructed INIT
can no longer be trusted. In this case, the INIT must be explicitly
validated after unpacking to avoid processing potentially tampered data.
Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO
processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook())
when cookie_auth_enable is disabled. On failure, the new association is
freed and the packet is discarded.
Also tighten cookie validation in sctp_unpack_cookie() by verifying the
embedded chunk type is SCTP_CID_INIT before treating it as an INIT
chunk.
Finally, update sctp_verify_init() to validate parameter bounds using
the actual embedded INIT length instead of chunk->chunk_end, since the
INIT stored in COOKIE-ECHO may not span the entire chunk buffer.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72399In the Linux kernel, the following vulnerability has been resolved:
net: enetc: check the number of BDs needed for xdp_frame
The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the
number of fragments contained in xdp_frame may be greater than or equal
to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr
to be out of bounds.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72400In the Linux kernel, the following vulnerability has been resolved:
seg6: validate SRH length before reading fixed fields
seg6_validate_srh() reads fixed SRH fields such as srh->type and
srh->hdrlen before checking that the supplied length covers the fixed
struct ipv6_sr_hdr fields.
The BPF SEG6 encap path reaches this with a BPF program-supplied pointer
and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and
END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the
length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6
encap header can therefore make the validator read srh->type at offset 2
beyond the caller-supplied buffer.
Reject lengths shorter than the fixed SRH at the top of
seg6_validate_srh(), before any field is read. This fixes the BPF helper
path and keeps the common validator robust.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72404In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72405In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync
Yue Sun reported a use-after-free and debugobjects warning in
udp_tunnel_nic_device_sync_work() during concurrent device operations.
The workqueue core clears the internal pending bit before invoking the
worker. At that point, a concurrent thread can queue the work again.
When the already running worker eventually clears the work_pending flag
to 0, it mistakenly clears the flag for the newly queued instance.
udp_tunnel_nic_unregister() then observes work_pending as 0 and frees
the structure while the second work item is still active in the queue,
leading to UAF.
Fix this by returning early in udp_tunnel_nic_device_sync() if
work_pending is already set, preventing redundant work queueing.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72406In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72407In the Linux kernel, the following vulnerability has been resolved:
geneve: validate inner network offset in geneve_gro_complete()
Even with both paths gated on gs->gro_hint, geneve_gro_complete()
re-derives the inner dispatch type and length from the packet and the
current gs->gro_hint, independently of geneve_gro_receive(). The two can
disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/
geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if
the re-read option bytes differ from the ones receive parsed.
geneve_gro_receive() already records the inner network header position in
NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the
offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case
where eth_gro_complete() steps over the inner MAC header, and bail out if
it lands past inner_network_offset.
Use a lower bound rather than exact equality: between gh_len and the inner
L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag
(vlan_gro_receive() advances the recorded offset past it), which only moves
inner_network_offset further out. A valid frame therefore always satisfies
inner_nh <= inner_network_offset, while a gh_len inflated by a hint
gro_receive() did not honour dispatches past the validated inner header,
i.e. the out-of-bounds completion. Only the latter is rejected.Analyse NVD en cours Critique CVSS 10 CVE-2026-72408In the Linux kernel, the following vulnerability has been resolved:
geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint
geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(),
which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT
(gs->gro_hint). geneve_gro_complete() instead calls the low-level
geneve_opt_gro_hint_off() and acts on the hint unconditionally.
On a tunnel without the hint, receive aggregates the frames as plain
ETH_P_TEB while complete still honours an attacker-supplied hint option: it
inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch
type, so the inner gro_complete handler runs at nhoff + gh_len, an offset
receive never pulled nor validated, reading out of bounds of the skb head:
BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196)
Read of size 1 at addr ffff88800fe91980 by task exploit/153
ipv6_gro_complete (net/ipv6/ip6_offload.c:196)
geneve_gro_complete (drivers/net/geneve.c:965)
udp_gro_complete (net/ipv4/udp_offload.c:940)
inet_gro_complete (net/ipv4/af_inet.c:1621)
__gro_flush (net/core/gro.c:306)
Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so
both paths agree. Tunnels that enable the hint are unaffected.Analyse NVD en cours Critique CVSS 10 CVE-2026-72409In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72410In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Validate NIX maximum LFs correctly
NIX maximum number of LFs can be set via devlink command
but that can be done before assigning any LFs to a PF/VF.
The condition used to check whether any LFs are assigned is
incorrect. This patch fixes that condition.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72411In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work
Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports
and closes the CPU port conduits:
dsa_switch_for_each_cpu_port(dp, priv->ds)
dev_close(dp->conduit);
mxl862xx_remove() unregisters the switch before cancelling this work:
set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
cancel_delayed_work_sync(&priv->stats_work);
dsa_unregister_switch(ds);
mxl862xx_host_shutdown(priv);
dsa_unregister_switch() frees the dsa_port objects. If a CRC error
schedules the work during teardown it can run after the ports have been
freed and dereference freed memory.
Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set
before dsa_unregister_switch(). DSA tears the ports down under
rtnl_lock(), so checking the flag under rtnl_lock() means the work either
runs before teardown and sees valid ports, or runs afterwards, observes
the flag and skips the walk. This mirrors the host_flood_work handler,
which skips torn-down ports under rtnl_lock().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72412In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Fix handling of _PAGE_UNUSED pte bit
The _PAGE_UNUSED softbit should not really be lying around. Its sole
purpose is to signal to try_to_unmap_one() and try_to_migrate_one()
that the page can be discarded instead of being moved / swapped.
KVM has no way to know why a page is being unmapped, so it sets the bit
on userspace ptes corresponding to unused guest pages every time they
get unmapped. KVM has no reasonable way to clear the bit once the page
is in use again.
While set_ptes() checks and clears the bit, other paths that set new
ptes did not. This led to used pages being thrown out as if they were
unused, causing guest corruption.
Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in
set_pte(), i.e. whenever a present pte is getting set. The check in
set_ptes() is then redundant and can be removed.
Also fix gmap_helper_try_set_pte_unused() to only set the bit if the
pte is present; the _PAGE_UNUSED bit is only defined for present ptes
and thus should not be set for non-present ptes.Analyse NVD en cours Critique CVSS 9.3 CVE-2026-72415In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ge_put_enum_double() passes the user-supplied enumeration index
item[0] to snd_soc_enum_item_to_val() without checking it against the
number of items in the enum:
ret = snd_soc_enum_item_to_val(e, item[0]);
snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array
with that index (e->values is set from a devm_kcalloc() of e->items
entries), so a control write with an out-of-range item[0] reads past the
end of the values buffer. The bounds check in
snd_soc_dapm_put_enum_double() only runs afterwards, so it does not
prevent the read here.
Reject an out-of-range item before using it, matching the other enum put
handlers.
This issue was pointed out by the Sashiko AI review bot while reviewing a
related enum-validation series:
https://lore.kernel.org/all/[email protected]/Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72416In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_compat: ebtables emulation must reject non-bridge targets
xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so
on. ebtables targets return incompatible verdicts: EBT_ACCEPT,
EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC.
ebtables doesn't permit this since
11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets")
but that commit missed the nft_compat layer.Analyse NVD en cours Élevée CVSS 7.3 CVE-2026-72417In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto()
Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before
using it to compute the header size, avoiding out-of-bounds access with
malformed IP headers.
While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP
constant when setting ctx->tun.proto and reference ctx->tun.hdr_size
when updating ctx->offset.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72418In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: prevent connlimit drops for early confirmed ct
Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add
was skipped") introduced a regression where packets for valid
connections are dropped when using connlimit for soft-limiting
scenarios.
The issue occurs when a new connection reuses a socket currently in
the TIME_WAIT state. In this scenario, the connection tracking entry
is evaluated as already confirmed. Previously, __nf_conncount_add()
assumed that if a connection was confirmed and did not originate from
the loopback interface, it should skip the addition and return -EEXIST.
Skipping the addition triggers a garbage collection run that cleans up
the TIME_WAIT connection. Consequently, the active connection count
drops to 0, which xt_connlimit mishandles, leading to the false rejection
of the perfectly valid new connection.
Fix this by replacing the interface check with protocol-agnostic state
checks. We now skip the tree insertion and preserve the lockless garbage
collection optimization only if the connection is IPS_ASSURED. This
allows early-confirmed setup packets (such as reused TIME_WAIT sockets
or locally generated SYN-ACKs) to be properly evaluated and counted
without falsely dropping. The goto check_connections path is maintained
to ensure these setup packets are deduplicated correctly.
This has been tested with slowhttptest and HTTP server configured
locally to ensure we are not breaking soft-limiting scenarios for local
or external connections. In addition, it was tested with a OVS zone
limit too.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72419In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init()
We ran into below KASAN splat, which is mostly uninteresting, beside
for having nf_nat_register_fn() in the call chain as a cause for the
offending access:
==================================================================
BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640
Read of size 8 at addr ffff890031e54c20 by task iptables/9510
CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
[…] dump_stack_lvl+0xee/0x160 ffff88004117eeb8
[…] print_report+0x6e/0x640 ffff88004117eee0
[…] ? __phys_addr+0x8e/0x140 ffff88004117eef0
[…] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08
[…] ? complete_report_info+0xec/0x1c0 ffff88004117ef20
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48
[…] kasan_report+0xbc/0x140 ffff88004117ef50
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90
[…] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8
[…] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070
[…] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080
[…] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8
[…] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130
[…] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190
[…] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8
[…] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310
[…] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358
[…] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360
[…] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488
[…] ? lock_acquire+0x16f/0x320 ffff88004117f490
[…] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0
[…] ? __nla_parse+0x45/0x80 ffff88004117f500
[…] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550
[…] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618
[…] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720
[…] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8
[…] ? gr_is_capable+0x6f/0xe0 ffff88004117f830
[…] ? __nla_parse+0x45/0x80 ffff88004117f860
[…] ? skb_pull+0x103/0x1a0 ffff88004117f880
[…] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0
[…] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8
[…] ? netlink_lookup+0xe2/0x240 ffff88004117f900
[…] netlink_unicast+0x74b/0xb00 ffff88004117f930
[…] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980
[…] ? __check_object_size+0x3e/0xaa0 ffff88004117f998
[…] ? security_netlink_send+0x51/0x160 ffff88004117f9c8
[…] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8
[…] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8
[…] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00
[…] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60
[…] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8
[…] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8
[…] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30
[…] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd20
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd58
[…] ? find_held_lock+0x3b/0xe0 ffff88004117fd70
[…] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8
[…] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0
[…] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98
[…] do_syscall_64+0x7d/0x400 ffff88004117fec8
[…] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8
</TASK>
==================================================================
The out-of-bounds report, though, is a red herring as it is f
---truncated---Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72420In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapAnalyse NVD en cours Élevée CVSS 8.8 CVE-2026-72421In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour.Analyse NVD en cours Critique CVSS 10 CVE-2026-72422In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE
conn->preauth_info is shared connection state (struct
preauth_integrity_info, kmalloc-96) that is allocated and freed by the
SMB2 NEGOTIATE handler and read by the response send path.
smb2_handle_negotiate() allocates conn->preauth_info, and on a
deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the
allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the
connection srv_mutex), which is held across the whole handler body.
The response send path smb3_preauth_hash_rsp(), called from the send:
block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences
conn->preauth_info->Preauth_HashValue (via
ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a
client drives two SMB2 NEGOTIATE requests on the same connection, one
worker can free conn->preauth_info on the failing-negotiate path while a
concurrent send-path worker is reading it, producing a slab
use-after-free read (KASAN-confirmed).
The send-path read tested conn->preauth_info for NULL but raced with the
free that occurs between the NULL check and the dereference, so the NULL
guard alone does not close the window.
Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under
ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock.
Because the negotiate handler holds conn_lock across its kfree + NULL
assignment, a reader that also takes conn_lock either runs fully before
the allocation or fully after the NULL store, and can never observe the
freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash()
takes no locks itself (it only computes a SHA-512 over the buffer), so
no lock-ordering inversion is introduced, and conn_lock is a sleepable
mutex which is safe on this send path (it already performs network I/O).Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72423In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard conntrack opts error writes
The conntrack lookup and allocation kfuncs take an opts pointer
together with an opts__sz argument. The verifier checks only the memory
range described by opts__sz, but the wrappers unconditionally write
opts->error whenever the internal lookup or allocation helper returns an
error.
For an invalid size smaller than the end of opts->error, that write can
land outside the verifier-checked range. Keep returning NULL for invalid
arguments, but only report the error through opts->error when the
supplied size includes the field.
This preserves error reporting for the supported 12-byte and 16-byte
layouts, and for other invalid sizes that still include opts->error.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72425In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/resetAnalyse NVD en cours Élevée CVSS 7.1 CVE-2026-72426In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer spill metadata during half-slot cleanup
__clean_func_state() cleans dead stack slots in 4-byte halves. When the
high half of a STACK_SPILL slot is dead and the low half remains live,
cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears
the saved spilled_ptr metadata.
That conversion is safe only for scalar spills. For a pointer spill, this
metadata clear lets a later 32-bit fill from the still-live half avoid the
normal non-scalar register-fill check and be treated as an ordinary scalar
stack read.
Leave non-scalar spill slots intact in this half-live shape. This is
conservative for pruning and preserves the existing
check_stack_read_fixed_off() rejection path for partial fills from pointer
spills.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-72427In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix effective prog array index with BPF_F_PREORDER
replace_effective_prog() and purge_effective_progs() located the slot in
the effective array by walking the program hlist and counting entries
linearly. That count does not match the array layout: compute_effective_
progs() places BPF_F_PREORDER programs at the front (ancestor cgroup
first, attach order within a cgroup) and the rest after them (descendant
cgroup first). So when a preorder program is present, the linear hlist
position no longer equals the program's index in the effective array.
For replace_effective_prog() (bpf_link_update()) this overwrote the
wrong slot, corrupting the effective order. For purge_effective_progs(),
it could dummy out a slot belonging to a different program and leave the
detached program in the array while bpf_prog_put() drops its reference,
i.e. a use-after-free.
Fix both by replaying compute_effective_progs()'s placement (including
the per-cgroup preorder reversal) in a shared effective_prog_pos()
helper. Identify the entry by its struct bpf_prog_list pointer rather
than by (prog, link) value, so the lookup resolves to exactly the
attachment the syscall selected even when the same bpf_prog is attached
to several cgroups in the hierarchy.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72429In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix type confusion of dst_entry
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72434In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: make sure gc is properly stopped
Sashiko noticed that when destroying a set,
cancel_delayed_work_sync() was called while gc
calls queue_delayed_work() unconditionally which
can lead not to properly shutting down the gc.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72435In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72436In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phaseAnalyse NVD en cours Critique CVSS 9.8 CVE-2026-72438In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72440In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72442In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of
skb_header_pointer() to ensure the outer IPv6 header is in the skb
headroom, which is required for subsequent packet processing. Move
ctx->offset update inside the IPPROTO_IPV6 conditional block since it
should only be adjusted when an IP6IP6 tunnel is actually detected.
Simplify the rx path by removing ipv6_skip_exthdr() and checking
ip6h->nexthdr directly, as the flowtable fast path only handles simple
IP6IP6 encapsulation without extension headers.
Drop the tunnel encapsulation limit destination option support from the
tx path to match, since the rx path no longer handles extension headers.
Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(),
nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with
the ipv6_tel_txoption struct and related headroom/MTU adjustments.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72444In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72446In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: qcom: reject stream disable with no active interface
handle_uaudio_stream_req() resolves an interface index with
info_idx_from_ifnum(), which returns -EINVAL when no interface matches.
The enable branch and the response: cleanup label both guard against a
negative index, but the disable branch does not: it forms
info = &uadev[pcm_card_num].info[info_idx] and dereferences it.
uadev[].info is a pointer allocated only when a stream is first enabled,
so a negative info_idx on the disable path is unsafe in two ways:
- If the card was never enabled, .info is NULL and &info[-EINVAL] is a
wild pointer; reading info->data_ep_pipe faults (kernel oops).
- If the card was enabled at least once (.info allocated) and the
disable names an interface that does not match, &info[-EINVAL] points
before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an
out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte
write (both pipe fields are cleared to 0). That is memory corruption,
not just a NULL dereference.
The request is reachable from unprivileged local userspace over
AF_QIPCRTR. Reject a disable request with no resolved interface, matching
the guard the enable path already has.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72449In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
The cleanup tail of kfd_criu_resume_svm() walks
svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata
without removing it from the list. The list head is left pointing at
freed kmalloc-96 objects.
A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty()
reads the dangling ->next (use-after-free), the loop walks freed entries,
and each is kfree()'d again (double-free). This is reachable by an
unprivileged render-group user via /dev/kfd with no capabilities required.
Add list_del() before the kfree() so the list is properly emptied. The
list_for_each_entry_safe() iterator already caches the next pointer, so
unlinking during the walk is safe.
(cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1)Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72450In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate selector family and prefixlen during match
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow).Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72451In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix xfrm state cache insertion race
The xfrm input state cache insertion code checks the validity of
the state before acquiring the global xfrm_state_lock. Thus it's
possible for someone else to kill the state after it passed the
validity check, and then the insertion will add the dead state
to the cache.
Fix this by moving the validity check inside the lock.
This entire function is called on the input path, where BH must
be off (e.g., the caller of this function xfrm_input acquires
its spinlocks without disabling BH).
So there is no need to disable BH here or take the RCU read lock.
Remove both and replace them with an assertion that trips if BH
is accidentally enabled on some future calling path.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72452In the Linux kernel, the following vulnerability has been resolved:
drm/i915: clear CRTC color blob pointers after dropping refs
intel_crtc_put_color_blobs() drops the CRTC color blob references, but
leaves the corresponding pointers unchanged.
This can matter in intel_crtc_prepare_cleared_state(), which frees the
old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw().
The latter can fail while looking up the DP tunnel group state, for
example with -EDEADLK.
If that happens, the function returns without completing the cleared
state preparation. The failed atomic state will then be cleared by the
atomic core and intel_crtc_free_hw_state() can be called again for the
same state, dropping the same blob references again.
Clear the blob pointers after dropping the references so repeated cleanup
of the same CRTC hw state is safe.
(cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8)Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72454In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72455In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases")
intrdouced a small bug, where path_name() may pass a potentially uninitialized
*name to aa_audit_file() if the path->dentry had been replaced with
aa_null.dentry earlier on. This can lead to page fault like one observed on
7.0.2 openSUSE Tumbleweed kernel:
[51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003
[51692.242762] [ T24690] #PF: supervisor read access in kernel mode
[51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page
[51692.242765] [ T24690] PGD 0 P4D 0
[51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI
[51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51
[51692.242775] [ T24690] Tainted: [O]=OOT_MODULE
[51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026
[51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30
[51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48
[51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282
[51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000
[51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003
[51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000
[51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700
[51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80
[51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000
[51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0
[51692.242799] [ T24690] PKRU: 55555554
[51692.242800] [ T24690] Call Trace:
[51692.242802] [ T24690] <TASK>
[51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40
[51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0
[51692.242816] [ T24690] aa_audit+0x5a/0x170
[51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0
[51692.242825] [ T24690] path_name+0xd2/0x100
[51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0
[51692.242832] [ T24690] aa_path_perm+0xef/0x150
[51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0
[51692.242840] [ T24690] security_file_open+0x46/0xd0
[51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0
[51692.242848] [ T24690] vfs_open+0x30/0x100
While here, initialise variables which are passed down to path_name().Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72459In the Linux kernel, the following vulnerability has been resolved:
apparmor: aa_label_alloc use aa_label_free on alloc failure
aa_label_alloc() allocates a secid before allocating or taking the label
proxy. If the later proxy step fails, the error path only freed the label
memory, leaking any resources initialized by aa_label_init().
Use aa_label_free() on the failure path so partially initialized labels
release their secid and other label resources before the backing memory is
freed.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72460In the Linux kernel, the following vulnerability has been resolved:
apparmor: check label build before no_new_privs test
aa_change_profile() builds a replacement label with
fn_label_build_in_scope() before the no_new_privs subset check. The build
helper can fail and return NULL or an ERR_PTR, but the result was passed
to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL()
check.
Reuse the existing target-label build failure handling immediately after
the build. This preserves the current audit handling while preventing the
subset helper from dereferencing an invalid label.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72461In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix refcount leak when updating the sk_ctx
Currently update_sk_ctx() transfers the plabel reference, unfortunately
it is also unconditionally put in the caller. Ideally we would make
the caller conditionally put the reference based on whether it was
transferred but for now just fix the bug by getting a reference.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72462In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race in unix socket mediation when peer_path is used
The holding a reference to the peer_sk is not enough to ensure access
to the peer sk path. Accessing the path outside of the state lock
allows for a race with unix_release_sock(). Fix this by taking the
state lock and getting a reference to the path under lock.
Ideally for connected sockets we would cache this information so we
don't have to take the lock here. But for now just fix the race.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72463In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72464In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Repost Receive buffers for malformed replies
rpcrdma_wc_receive() decrements the transport's Receive count for
every completion before it dispatches a successful Receive to
rpcrdma_reply_handler(). The handler must post a replacement
Receive WR before returning unless ownership of the rep has moved
elsewhere, as on the backchannel path.
Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC
senders and posting Receives") moved the Receive refill out of
rpcrdma_wc_receive(), where it had run ahead of every reply, into
rpcrdma_reply_handler() so that the responder's credit grant could
be parsed before reposting. The bad-version and short-reply exits
never reach that refill: they recycle the rep and return without
calling rpcrdma_post_recvs().
A remote peer can therefore drain the client's posted Receive
queue by sending a sustained stream of replies that are shorter
than the fixed transport header or that carry an unrecognized
RPC/RDMA version. Each such reply consumes one posted Receive
without replacing it. Once the queue empties, the peer's next
Send finds no posted Receive and the transport stalls until
reconnect.
Route both malformed-reply exits through the shared repost tail
after recycling the rep, refilling against buf->rb_credits, the
most recent accepted credit grant. Neither exit updates the
congestion window, so RPCs admitted under the previous grant
remain in flight awaiting replies. A smaller refill target would
let a stream of malformed replies ratchet the posted Receive count
down to the batch floor while the congestion window still admits
rb_credits RPCs; a burst of valid replies to those RPCs could then
overrun the posted Receives, and because the client connects with
rnr_retry_count of zero, a single RNR NAK terminates the
connection. Refilling against rb_credits also restores the target
that applied to malformed replies before commit 2ae50ad68cd7
("xprtrdma: Close window between waking RPC senders and posting
Receives") when rpcrdma_post_recvs() computed it from rb_credits
internally. rb_credits is at least one from connection
establishment onward, so the repost path always keeps Receives
posted.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72465In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Sanitize the reply credit grant after parsing
The out_norqst exit in rpcrdma_reply_handler() branches away before
the credit clamp, so a reply that matches no pending request reaches
out_post carrying the raw credit value parsed from the wire.
rpcrdma_post_recvs() does not bound its @needed argument: the refill
loop allocates and chains Receive WRs until the count is satisfied or
allocation fails. A peer that sends a well-formed reply carrying an
unknown XID and an inflated credit grant therefore drives rep
allocation and Receive posting past re_max_requests on every such
reply.
Move the clamp to immediately after the credit field is parsed,
ahead of the first branch that can reach out_post, so every later
consumer sees a sanitized value. The cwnd update stays on the
matched-request path.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-72466In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix bcall rep leak and unbounded peek
rpcrdma_is_bcall() decodes a reply's first words to decide whether
the frame is a backchannel call. Two issues in that decode path
let a short or malformed reply leak the receive buffer and drain
the Receive queue.
First, the speculative peek
p = xdr_inline_decode(xdr, 0);
/* five p++ reads follow */
asks xdr_inline_decode() for zero bytes, which returns xdr->p
without consulting xdr->end. The five subsequent __be32 reads can
then walk up to 20 bytes past the wire payload into stale regbuf
contents and misclassify the reply as a backchannel call.
Second, after the post-peek
p = xdr_inline_decode(xdr, 3 * sizeof(*p));
if (unlikely(!p))
return true;
the short-header arm returns true without calling
rpcrdma_bc_receive_call(). The contract with the caller is that a
true return transfers ownership of rep to the backchannel path:
rpcrdma_reply_handler()
if (rpcrdma_is_bcall(r_xprt, rep))
return; /* bare return, skips out_post */
...
out_post:
rpcrdma_post_recvs(r_xprt, credits + ...);
Because rpcrdma_bc_receive_call() never ran, no one took rep, but
rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put()
and rpcrdma_post_recvs(). The rep, with its persistently
DMA-mapped receive buffer, is orphaned on rb_all_reps and freed
only at transport teardown. This completion reposts nothing, so
its slot is reclaimed only when a later forward-channel reply
reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to
backfill; absent that traffic the Receive queue drains and the
peer's Sends draw RNR NAKs.
Fix by consulting xdr->end after the zero-length peek so the five
__be32 reads cannot run unless 20 bytes of wire payload remain. A
byte-precise comparison against xdr->end is required because a
non-4-aligned receive rounds the stream's word count up past the
true payload. Also return false from the short-header arm so the
reply falls through the normal out_norqst cleanup chain
(rpcrdma_rep_put() plus rpcrdma_post_recvs()).Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72469In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72470In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72471In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent potential lcn remains uninitialized
The target VCN being sought was not found within runs[0], causing
run_lookup() to return false. This causes run_lookup_entry() to return
false, which in turn results in a len value of 0, and the new parameter
passed to attr_data_get_block() is NULL. Collectively, these factors
ultimately cause attr_data_get_block_locked() to exit prematurely without
initializing lcn, thereby triggering [1].
To prevent [1], the clen check within ni_seek_data_or_hole() has been
moved to occur before the lcn check.
[1]
BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530
vfs_llseek fs/read_write.c:391 [inline]Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-72472In the Linux kernel, the following vulnerability has been resolved:
nfs: use nfsi->rwsem to protect traversal of the file lock list
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72473In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decouple req recycling from RPC completion
rl_kref formerly served two distinct lifetimes through a single
refcount: it gated when a Reply could wake its RPC task, and it
gated when an rpcrdma_req could return to its free pool. The
marshal path took the Send-side reference only when SGEs needed
DMA-unmap (sc_unmap_count > 0), which made a Send carrying only
pre-registered buffers an exception: the Reply handler dropped
rl_kref from 1 to 0 and freed the req while the HCA might still
be DMA-reading from its send buffer.
Give rl_kref a narrower job. The RPC layer takes one reference
when slot allocation hands a req out. rpcrdma_prepare_send_sges()
takes a Send-side reference unconditionally after WR preparation
succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop
the RPC-layer reference; rpcrdma_sendctx_unmap() drops the
Send-side reference. The req returns to its free pool only after
both owners have signed off.
The existing kref_init(&req->rl_kref) call in
rpcrdma_prepare_send_sges() is removed. Initialization moves to
the slot-allocation paths (xprt_rdma_alloc_slot and
rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref
before the req returns to a free pool. A re-init in the marshal
path would discard the RPC-layer reference that already exists
on entry.
Three invariants follow:
- Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1.
xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the
backlog-wake branch in xprt_rdma_alloc_slot() each kref_init
rl_kref before publishing the req. Without this invariant,
an RPC task that aborts between slot allocation and marshal
(gss_refresh failure or signal during call_connect, for
example) would drive xprt_release() ->
xprt_rdma_free_slot() -> kref_put against a refcount of
zero, saturating refcount_t and stranding the slot.
- The Send-side reference is taken only after WR prep
succeeds. A mapping failure in rpcrdma_prepare_send_sges()
runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx
and clears sc_req without touching rl_kref. The sendctx
ring walks in rpcrdma_sendctx_put_locked() and
rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL,
so a burst of -EIO marshal failures cannot hold reqs off
rb_send_bufs.
- The release callback re-arms rl_kref so the next consumer
enters with the invariant satisfied.
Replies now complete the RPC directly. rpcrdma_reply_handler()
calls rpcrdma_complete_rqst() in place of kref_put on the
non-LocalInv branch. The LocalInv branch already completes the
RPC from frwr_unmap_async() and is unaffected.
Because Send-side references can now outlive RPC completion,
connection teardown drains sendctx entries whose unsignaled
Sends never had a later signaled completion to walk the ring.
rpcrdma_sendctxs_destroy() walks the active range and runs
rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req
before the request buffers are reset, and is moved ahead of
rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs
are still in their pre-reset state when the Send-side refs are
released.
The drain creates a teardown-ordering hazard on the backchannel
path. With the new lifetime, releasing a bc_prealloc req from
rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect
in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has
already emptied bc_pa_list, so the drained reqs would otherwise
leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0)
a second time after the disconnect to reclaim them.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72476In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72477In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: call _ntfs_bad_inode() when failing to rename
It is safe to call _ntfs_bad_inode on live inodes since:
commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.")
The WARN_ON was added when it wasn't safe by:
commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further
operations on the inconsistent inode.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72478In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: add bounds check to run_get_highest_vcn()
run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without
any length bound, relying solely on a 0x00 terminator to stop. A
crafted $LogFile UpdateMappingPairs record whose embedded attribute
contains mapping-pairs runs without a terminator causes the function to
read past the slab allocation, triggering a KASAN slab-out-of-bounds
read on mount.
The sibling function run_unpack() received an analogous bounds-check in
commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"),
but run_get_highest_vcn() was missed.
Take a run_buf_size parameter and reject any run header whose payload
would extend past the buffer end, mirroring the pattern used by
run_unpack(). The caller in fslog.c passes the remaining attribute
bytes after the mapping-pairs offset.
KASAN report (on mainline v7.1 merge window HEAD):
BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410
Read of size 1 at addr ffff88800e2d5400 by task mount/72
Call Trace:
run_get_highest_vcn+0x3c0/0x410
do_action.isra.0+0x3ba8/0x7b50
log_replay+0x9ddd/0x10200
ntfs_loadlog_and_replay+0x4ad/0x610
ntfs_fill_super+0x214a/0x4540Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-72480In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling
ams_event_to_channel() may return a pointer past the end of
dev->channels when no matching scan_index is found. This can lead
to invalid memory access in ams_handle_event().
Add a bounds check in ams_event_to_channel() and return NULL when
no channel is found. Also guard the caller to safely handle this
case.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72482In the Linux kernel, the following vulnerability has been resolved:
gpib: fix double decrement of descriptor_busy in command_ioctl()
commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers")
introduced a descriptor_busy reference counter to pin struct
gpib_descriptor across IO ioctl operations. In command_ioctl(), the
error path inside the loop decrements descriptor_busy and breaks, but
execution then falls through to the unconditional decrement after the
loop, underflowing the counter to -1.
This re-enables the use-after-free that the original fix was meant to
prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on
an actively-used descriptor and frees it.
Remove the early decrement from the error path. The post-loop
decrement already handles all exit paths, matching the correct pattern
used in read_ioctl() and write_ioctl().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72483In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72485In the Linux kernel, the following vulnerability has been resolved:
coresight: platform: defer connection counter increment until alloc succeeds
coresight_add_out_conn() increments nr_outconns before calling
devm_krealloc_array() and again before devm_kmalloc(). If either
allocation fails, the counter is already bumped while the corresponding
array entry is NULL or uninitialized garbage.
coresight_add_in_conn() has the same problem with nr_inconns and
devm_krealloc_array().
In both cases the probe returns -ENOMEM, which causes
coresight_get_platform_data() to call coresight_release_platform_data()
for cleanup. That function iterates up to nr_outconns (or nr_inconns)
entries and dereferences each pointer unconditionally, hitting the NULL
or garbage entry and panicking instead of failing gracefully.
Fix by moving the counter increments to after all allocations succeed,
so the struct is always consistent on any error path.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72487In the Linux kernel, the following vulnerability has been resolved:
PCI: Check ROM header and data structure addr before accessing
We meet a crash when running stress-ng on x86_64 machine:
BUG: unable to handle page fault for address: ffa0000007f40000
RIP: 0010:pci_get_rom_size+0x52/0x220
Call Trace:
<TASK>
pci_map_rom+0x80/0x130
pci_read_rom+0x4b/0xe0
kernfs_file_read_iter+0x96/0x180
vfs_read+0x1b1/0x300
Our analysis reveals that the ROM space's start address is
0xffa0000007f30000, and size is 0x10000. Because of broken ROM space,
before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is
already pointed to the ROM space end, invoking readl() would read 4 bytes
therefore cause an out-of-bounds access and trigger a crash. Fix this by
adding image header and data structure checking.
We also found another crash on arm64 machine:
Unable to handle kernel paging request at virtual address ffff8000dd1393ff
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
The call trace is the same with x86_64, but the crash reason is that the
data structure addr is not aligned with 4, and arm64 machine report
"alignment fault". Fix this by adding alignment checking.
[bhelgaas: shorten function names, wrap comments]Analyse NVD en cours Élevée CVSS 7.7 CVE-2026-72488In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-72489In the Linux kernel, the following vulnerability has been resolved:
staging: nvec: fix use-after-free in nvec_rx_completed()
In nvec_rx_completed(), when an incomplete RX transfer is detected,
nvec_msg_free() is called to return the message back to the pool by
clearing its 'used' atomic flag. Immediately after this, the code
accesses nvec->rx->data[0] to check the message type.
Since nvec_msg_free() marks the pool slot as available via atomic_set(),
any concurrent or subsequent call to nvec_msg_alloc() could claim that
same slot and overwrite its data[] array. Reading nvec->rx->data[0] after
freeing the message is therefore a use-after-free.
Fix this by saving the message type byte before calling nvec_msg_free(),
then using the saved value for the battery quirk check.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-72491In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix race condition on rdma->state in trans_rdma.c
The rdma->state field is modified without holding req_lock in both
recv_done() and p9_cm_event_handler(), while rdma_request() accesses
the same field under the req_lock spinlock. This inconsistent locking
creates a race condition:
- recv_done() running in softirq completion context sets
rdma->state = P9_RDMA_FLUSHING without acquiring req_lock
- p9_cm_event_handler() modifies rdma->state at multiple points
(ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without
req_lock
- rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to
protect the read-modify-write of rdma->state
The race can cause lost state transitions: recv_done() or the CM
event handler could set state to FLUSHING/CLOSED while rdma_request()
is concurrently checking or modifying state under the lock, leading to
the FLUSHING transition being silently overwritten by CLOSING. This
corrupts the connection state machine and can cause use-after-free on
RDMA request objects during teardown.
Fix by adding req_lock protection to all rdma->state modifications in
recv_done() and p9_cm_event_handler(), matching the pattern already
used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore
in the CM event handler since it can race with recv_done() which runs
in softirq context.
Tested with a kernel module that races two threads (simulating
rdma_request and recv_done/CM handler) on rdma->state with proper
locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost
transitions.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72492In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in same_client_has_lease()
same_client_has_lease() returns an opinfo pointer from ci->m_op_list
after dropping ci->m_lock without taking a reference.
smb_grant_oplock() then dereferences that pointer in copy_lease() and
when checking breaking_cnt. A concurrent close can remove the old lease
from ci->m_op_list and drop the last reference before the caller uses
the returned pointer, leading to a use-after-free.
Take a reference when same_client_has_lease() selects an existing lease,
drop any previous match while scanning, and release the returned
reference in smb_grant_oplock() after copying the lease state.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72493In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped).Analyse NVD en cours Critique CVSS 9.9 CVE-2026-72494In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <[email protected]> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-72495In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page.Analyse NVD en cours Critique CVSS 9.3 CVE-2026-72496In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status.Analyse NVD en cours Critique CVSS 9.2 CVE-2026-72497In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72499In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72500In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq().Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-72502In the Linux kernel, the following vulnerability has been resolved:
tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)
When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535).
This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535.
However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel.
If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will
be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer
dereference because local TCP packets do not use frag_list.
Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from
ip6_default_advmss() when MTU is large.
Also update the stale comment in ip6_default_advmss() which suggested
that IPV6_MAXPLEN is returned to mean "any MSS".Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-73041SiYuan versions before v3.7.4 fail to validate or escape annotation fields written to disk by the setFileAnnotation endpoint. Attackers can inject malicious markup into annotation fields that execute as script in the PDF renderer with full Node.js access when a user opens an annotated PDF.Analyse NVD en cours Critique CVSS 9 CVE-2026-73042SiYuan before v3.7.4 fails to properly escape database menu metadata in HTML interpolation, allowing stored values to execute script when users open group, view, or field-edit menus. Attackers can inject markup through field descriptions or names that close containing elements and execute arbitrary code via event handlers, reaching Node built-ins due to Electron's insecure configuration.Analyse NVD en cours Critique CVSS 9 2201–2300 / 11286 CVE