cve
Veille des vulnérabilités Archive complète
identifiantvulnérabilitésévéritépublié
CVE-2026-64395In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64396In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel().Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64397In the Linux kernel, the following vulnerability has been resolved:
ksmbd: serialize QUERY_DIRECTORY requests per file
smb2_query_dir() stores a pointer to its stack-allocated private data in
the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the
same file handle can overwrite this pointer while an iterate_dir() callback
is still using it, resulting in a stack use-after-free.
Add a per-file mutex and hold it while accessing the shared directory
enumeration state. The lock covers scan restart, dot entry state,
readdir_data setup and iteration, and response construction. This prevents
another request from replacing readdir_data.private before the current
request has finished using it and also serializes the shared file position.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64398In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64399In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILE
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64400In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately.Analyse NVD en cours Élevée CVSS 8.6 CVE-2026-64401In the Linux kernel, the following vulnerability has been resolved:
smb: client: resolve SWN tcon from live registrations
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or incrementing tc_count through
swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while
holding cifs_swnreg_idr_mutex also violates the documented CIFS lock
order.
Fix this by making the registration store only the stable witness
identity: id, net name, share name, and notify flags. When a notify
arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,
then find and pin a live witness tcon that currently matches the net/share
pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification
path uses that pinned tcon directly and drops the reference when done.
Registration and unregister messages now use the live tcon passed by the
caller instead of a cached tcon in the registration. The final unregister
send is folded into cifs_swn_unregister() while the registration is still
protected by cifs_swnreg_idr_mutex. This removes the previous
find/drop/reacquire raw-pointer window. The release path only removes the
idr entry and frees the stable identity strings.
This preserves the intended one-registration/many-tcon behavior: a
registration id represents a net/share pair, and notify handling acts on a
live representative selected at use time. It also preserves CLIENT_MOVE
ordering for the representative tcon because the old-IP unregister is sent
before cifs_swn_register() sends the new-IP register.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64402In the Linux kernel, the following vulnerability has been resolved:
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls
smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring
buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is
handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages
normalization is only applied after the first loop iteration.
This leaves the initial page index underived from the buffer size, which
can result in an out-of-bounds write past dst_pages[] when head exceeds
the AUX buffer size.
Normalize head modulo the AUX buffer size before deriving the page index
and offset, mirroring tmc_etr_sync_perf_buffer().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64403In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64406In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths.Analyse NVD en cours Élevée CVSS 8 CVE-2026-64408In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64410In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64411In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64412In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: module names must be null-terminated
We need to explicitly check the length, else we may pass non-null
terminated string to request_module().Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64413In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place.Analyse NVD en cours Élevée CVSS 7 CVE-2026-64414In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64418In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64420In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0Analyse NVD en cours Élevée CVSS 7 CVE-2026-64422In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64423In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: remove multicast group from hash table on device destruction
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
Call Trace:
<IRQ>
dump_stack_lvl+0x67/0x90
print_report+0x175/0x7c0
kasan_report+0x147/0x180
ip_check_mc_rcu+0x149/0x3f0
udp_v4_early_demux+0x36d/0x12d0
ip_rcv_finish_core+0xb8b/0x1390
ip_rcv_finish+0x54/0x120
NF_HOOK+0x213/0x2b0
__netif_receive_skb+0x126/0x340
process_backlog+0x4f2/0xf00
__napi_poll+0x92/0x2c0
net_rx_action+0x583/0xc60
handle_softirqs+0x236/0x7f0
do_softirq+0x57/0x80
</IRQ>
Allocated by task 2239:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x72/0x90
____ip_mc_inc_group+0x31a/0xa40
__ip_mc_join_group+0x334/0x3f0
do_ip_setsockopt+0x16fa/0x2010
ip_setsockopt+0x3f/0x90
do_sock_setsockopt+0x1ad/0x300
Freed by task 0:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x40/0x50
__kasan_slab_free+0x3a/0x60
__rcu_free_sheaf_prepare+0xd4/0x220
rcu_free_sheaf+0x36/0x190
rcu_core+0x8d9/0x12f0
handle_softirqs+0x236/0x7f0Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64430In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive
the vector number. pci_irq_vector() calls msi_get_virq() that takes a
mutex and can therefore trigger "scheduling while atomic" splats:
BUG: scheduling while atomic: kworker/u33:0/55/0x00010001
...
Call trace:
...
schedule+0x38/0x110
schedule_preempt_disabled+0x28/0x50
__mutex_lock.constprop.0+0x848/0x908
__mutex_lock_slowpath+0x18/0x30
mutex_lock+0x4c/0x60
msi_domain_get_virq+0xe8/0x138
pci_irq_vector+0x2c/0x60
ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf]
__handle_irq_event_percpu+0x70/0x3a8
handle_irq_event+0x48/0x100
handle_edge_irq+0x100/0x1c8
...
Cache the Linux IRQ number for vector 0 when vectors are allocated and
use it as a base in the ISR. Running the ISR in a threaded IRQ handler
would also avoid the problem, but that would be unnecessary here.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64431In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid calling post_write_mst_fixup() for invalid index_block
ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write()
returns an error, intending to restore the buffer after a failed write.
However, ntfs_ib_write() returns an error immediately if
pre_write_mst_fixup() validation fails. The caller,
ntfs_icx_ib_sync_write(), interprets any error as a write failure
requiring rollback. It does not differentiate between I/O errors and
validation failures, and calls post_write_mst_fixup() anyway.
Since post_write_mst_fixup() assumes that the index_block contents is
correct, it doesn't perform the boundary checks, which results in
out-of-bounds memory access.
An attacker can craft a malicious NTFS image with:
- large index_block.usa_ofs offset, pointing outside the ntfs_record
- index_block.usa_count = 0, causing integer underflow
- or index_block.usa_count larger than actual number of sectors in the
ntfs_record, causing out-of-bounds access
KASAN reports describing the memory corruption:
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0
Read of size 2 at addr ffff8881586c9018 by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x19c/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x19c/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x19c/0x1d0
post_write_mst_fixup+0x19c/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0
Write of size 2 at addr ffff8881586c91fe by task p/9428
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x190
print_report+0x139/0x4ad
? post_write_mst_fixup+0x1aa/0x1d0
? __virt_addr_valid+0x262/0x500
? post_write_mst_fixup+0x1aa/0x1d0
kasan_report+0xe4/0x1d0
? post_write_mst_fixup+0x1aa/0x1d0
post_write_mst_fixup+0x1aa/0x1d0
ntfs_icx_ib_sync_write+0x179/0x220
ntfs_inode_sync_filename+0x83d/0x1080
__ntfs_write_inode+0x1049/0x1480
ntfs_file_fsync+0x131/0x9b0
==================================================================
Let's move the post_write_mst_fixup() call to ntfs_ib_write().
The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning.
If the index_block contents is invalid, pre_write_mst_fixup() fails and
ntfs_ib_write() returns early without calling post_write_mst_fixup() on
bad index_block.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64432In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns
In the analysis pass of $LogFile journal replay, log_replay() copies
LCNs from each action log record into an existing Dirty Page Table
(DPT) entry without bounding the destination index. A crafted NTFS
image with DPT entry lcns_follow=1 and an action log record with
lcns_follow=2 produces a kernel slab out-of-bounds write at mount
time:
BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60
Write of size 8 at addr ffff8880095e1040 by task mount
Two attacker-controlled fields can drive j+i past the allocated
page_lcns[] array:
1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow.
2. lrh->target_vcn may be smaller than dp->vcn, making the u64
subtraction wrap to a huge size_t.
Validate target VCN delta and per-record LCN count against the
DPT entry capacity, bail via the existing out: cleanup label with
-EINVAL.
This mirrors the bounds-check pattern added in commit b2bc7c44ed17
("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot")
and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in
journal-replay file record check").Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64434In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the ch
---truncated---Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64435In the Linux kernel, the following vulnerability has been resolved:
audit: Fix data races of skb_queue_len() readers on audit_queue
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
[PM: line length tweak]Analyse NVD en cours Élevée CVSS 8.2 CVE-2026-64436In the Linux kernel, the following vulnerability has been resolved:
net: af_key: initialize alg_key_len for IPComp states
pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by
allocating x->calg and copying only the algorithm name:
x->calg = kmalloc_obj(*x->calg);
if (!x->calg) {
err = -ENOMEM;
goto out;
}
strcpy(x->calg->alg_name, a->name);
x->props.calgo = sa->sadb_sa_encrypt;
Unlike the authentication (x->aalg) and encryption (x->ealg) branches of
the same function, the compression branch never initializes
calg->alg_key_len. IPComp carries no key and the allocation only
reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field
is left containing uninitialized slab data.
calg->alg_key_len is later used as a length by xfrm_algo_clone() when an
IPComp state is cloned during XFRM_MSG_MIGRATE:
xfrm_state_migrate()
xfrm_state_clone_and_setup()
x->calg = xfrm_algo_clone(orig->calg);
kmemdup(orig, xfrm_alg_len(orig));
where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With
a non-zero garbage alg_key_len, kmemdup() reads past the end of the
68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating
it triggers (net-next, KASAN, init_on_alloc=0):
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60
Read of size 4164 at addr ff11000025a74980 by task diag2/9287
CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xf7/0x600
kasan_report+0xe4/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x44/0x60
xfrm_state_migrate+0x70a/0x1da0
xfrm_migrate+0x753/0x18a0
xfrm_do_migrate+0xb47/0xf10
xfrm_user_rcv_msg+0x411/0xb50
netlink_rcv_skb+0x158/0x420
xfrm_netlink_rcv+0x71/0x90
netlink_unicast+0x584/0x850
netlink_sendmsg+0x8b0/0xdc0
____sys_sendmsg+0x9f7/0xb90
___sys_sendmsg+0x134/0x1d0
__sys_sendmsg+0x16d/0x220
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 9287:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
pfkey_add+0x2652/0x2ea0
pfkey_process+0x6d0/0x830
pfkey_sendmsg+0x42c/0x850
__sys_sendto+0x461/0x4b0
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ff11000025a74980
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
allocated 68-byte region [ff11000025a74980, ff11000025a749c4)
Depending on the uninitialized value the same field can instead request
an oversized kmemdup() allocation and make the migration clone fail.
The XFRM netlink path is not affected: verify_one_alg() rejects an
XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via
XFRM_MSG_NEWSA is always self-consistent.
Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64437In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on
double SMB2_CANCEL") made smb2_cancel() skip a work whose state is
KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But
KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same
freeing producer path is reached for CLOSED too:
SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets
the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock()
worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s
the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes
the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the
cancelled branch, skips release_async_work(). The work stays on
conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock
pointing at the freed file_lock.
A subsequent SMB2_CANCEL for the same AsyncId then passes the
KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so
smb2_cancel() fires cancel_fn again over the freed file_lock -- the same
use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit)
... cache file_lock_cache of size 192
Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with
KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is
silent on that kernel, so the splat is attributable to the CLOSE trigger.
Only an ACTIVE deferred work may have its cancel_fn fired: both terminal
states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees
the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE
so any non-active work is skipped.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64438In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix VF2PF work teardown race in adf_disable_sriov()
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64439In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - filter out async aead implementations at alloc
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64440In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB write in HT_caps_handler()
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64441In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64442In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64443In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
The IE parsing loop in update_beacon_info() advances by
(pIE->length + 2) each iteration but only guards on i < len.
When a malicious AP sends a Beacon whose last IE has only one byte
remaining in the frame (the element_id byte lands at len-1), the loop
reads pIE->length from one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond len, passing a truncated IE
to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past len.
Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length
for consistency with the sizeof(*pIE) guards added above.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64444In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64445In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
OnAuth() has two bugs in the shared-key authentication path.
When the Privacy bit is set, rtw_wep_decrypt() is called without
verifying that the frame is long enough to contain a valid WEP IV and
ICV. Inside rtw_wep_decrypt(), length is computed as:
length = len - WLAN_HDR_A3_LEN - iv_len
and then passed as (length - 4) to crc32_le(). If len is less than
WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative
and, after the implicit cast to size_t, causes crc32_le() to read far
beyond the frame buffer. Add a minimum length check before accessing
the IV field and calling the decryption path.
When processing a seq=3 response, rtw_get_ie() stores the Challenge
Text IE length in ie_len, but the subsequent memcmp() always reads 128
bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of
exactly 128 bytes; reject any IE whose length field differs, matching
the check already applied to OnAuthClient().Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64447In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64448In the Linux kernel, the following vulnerability has been resolved:
smb: client: restrict implied bcc[0] exemption to responses without data area
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the
---truncated---Analyse NVD en cours Élevée CVSS 8.2 CVE-2026-64449In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: bound slave read/write to the kern_buf size
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64450In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state.Analyse NVD en cours Critique CVSS 9.1 CVE-2026-64452In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix NHC entry use-after-free on error path
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64456In the Linux kernel, the following vulnerability has been resolved:
hwrng: virtio: clamp device-reported used.len at copy_data()
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request.Analyse NVD en cours Élevée CVSS 7.7 CVE-2026-64459In the Linux kernel, the following vulnerability has been resolved:
tcp: restore RCU grace period in tcp_ao_destroy_sock
Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that
"the destruction of info/keys is delayed until the socket destructor"
and therefore "no one can discover it anymore".
That argument does not hold for the call site in tcp_connect()
(net/ipv4/tcp_output.c:4327-4332). At that point the socket is in
TCP_SYN_SENT, has already been inserted into the inet ehash by
inet_hash_connect() in tcp_v4_connect(), and is therefore very much
discoverable: any softirq running tcp_v4_rcv() on another CPU can take
the socket out of the ehash, walk into tcp_inbound_hash(), and load
tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on
the destroying CPU.
The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208)
which re-loads tp->ao_info via rcu_dereference_check(); the re-load can
still observe the (about-to-be-freed) pointer because there is no
synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and
tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is
then walked at line 223:
hlist_for_each_entry_rcu(key, &ao->head, node, ...)
The writer's synchronous kfree() is free to complete between the line
218 re-fetch and the line 223 hlist iteration. The slab is reused
(or simply LIST_POISON1-stamped if not yet reused) and the iteration
walks attacker-controlled or poison memory in softirq context.
Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM):
an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET
installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged
TCP-AO segments toward its eventual 4-tuple via raw sockets, then
calls connect(). The md5-wins reconciliation in tcp_connect() fires
tcp_ao_destroy_sock(); the softirq backlog reader on the loopback
NAPI path crashes on the freed ao->head.first walk:
Oops: general protection fault, probably for non-canonical
address 0xfbd59c000000002f
KASAN: maybe wild-memory-access in range
[0xdead000000000178-0xdead00000000017f]
CPU: 0 UID: 1000 PID: 100 Comm: repro_userns
RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0
Call Trace: <IRQ>
__tcp_ao_do_lookup+0x107/0x1c0
tcp_ao_inbound_lookup.constprop.0+0x12a/0x200
tcp_inbound_ao_hash+0x5ea/0x1520
tcp_inbound_hash+0x7ce/0x1240
tcp_v4_rcv+0x1e7a/0x3e10
...
Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info
and replace the synchronous tcp_ao_info_free() with a call_rcu()
callback. Readers that captured tp->ao_info before rcu_assign_pointer
NULLed it now see the object remain valid until rcu_read_unlock().
With the patch applied the reproducer runs cleanly for 2000 iterations
on the same kernel build.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64460In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Skip VF Resizable BAR restore on read error
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state().Analyse NVD en cours Élevée CVSS 7 CVE-2026-64463In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64467In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow!Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64468In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_free_transaction()
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x1a0
binder_free_transaction+0x8c/0x320
binder_send_failed_reply+0x21c/0x2f8
binder_thread_release+0x488/0x7e0
binder_ioctl+0x12c0/0x29a0
[...]
Allocated by task 675:
__kmalloc_cache_noprof+0x174/0x444
binder_open+0x118/0xb70
do_dentry_open+0x374/0x1040
vfs_open+0x58/0x3bc
[...]
Freed by task 212:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_proc_dec_tmpref+0x32c/0x5e0
binder_deferred_func+0xc48/0x104c
process_one_work+0x53c/0xbc0
[...]
==================================================================
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64469In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_thread_release()
When a thread exits, binder_thread_release() walks its transaction stack
to clear the t->from and t->to_proc that correspond with the exiting
thread. However, a process dying in parallel might attempt to kfree some
of these transactions. And if one of them has no associated t->to_proc,
the t->to_proc->inner_lock will not be acquired.
This means that transaction accesses in binder_thread_release() after
t->to_proc has been cleared might race with binder_free_transaction()
and cause a use-after-free error as reported by KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798
Write of size 8 at addr ffff000016627500 by task X/715
CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_thread_release+0x5d0/0x798
binder_ioctl+0x12c0/0x299c
[...]
Allocated by task 717 on cpu 18 at 67.267803s:
__kasan_kmalloc+0xa0/0xbc
__kmalloc_cache_noprof+0x174/0x444
binder_transaction+0x554/0x8150
binder_thread_write+0xa30/0x4354
binder_ioctl+0x20f0/0x299c
[...]
Freed by task 202 on cpu 18 at 90.416221s:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_free_transaction+0x150/0x294
binder_send_failed_reply+0x398/0x6d8
binder_release_work+0x3e4/0x4ec
binder_deferred_func+0xbd8/0x104c
[...]
==================================================================
In order to avoid this, make sure that binder_free_transaction() reads
the t->to_proc under the transaction lock. This will serialize the
transaction release with the accesses in binder_thread_release(). Plus,
it matches the documented locking rules for @to_proc.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64475In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64481In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64485In the Linux kernel, the following vulnerability has been resolved:
ALSA: compress: Fix task creation error unwind
snd_compr_task_new() allocates the driver task before validating the
returned DMA buffers and reserving file descriptors. When either of
those later steps fails, the core frees its task wrapper and DMA-buffer
references without calling the driver's task_free() callback. Any
driver resources allocated by task_create() are therefore leaked.
The dual-fd allocation path also jumps to cleanup without storing the
negative get_unused_fd_flags() result in retval. Since retval still
contains the successful task_create() return value, TASK_CREATE can
incorrectly report success although the task was discarded.
Preserve the fd allocation errors and call task_free() when failure
occurs after a successful task_create() callback.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64490In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: Validate control metadata from the device
virtio-snd control handling trusts the device-provided control type and
value count returned by the device.
That metadata is then used directly to index g_v2a_type_map[] in
virtsnd_kctl_info(), and to size loops and memcpy() operations in
virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size
virtio_snd_ctl_value and snd_ctl_elem_value arrays.
A buggy or malicious device can therefore trigger out-of-bounds access by
advertising an invalid control type or an oversized value count.
Validate control type and count once in virtsnd_kctl_parse_cfg(), before
querying enumerated items or exposing the control to ALSA.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-64496In the Linux kernel, the following vulnerability has been resolved:
iio: event: Fix event FIFO reset race
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64501In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and
disable_one() were called from the out: block while keep_cs_asserted
was still true. This caused any SPI transfer issued by those callbacks
to carry cs_change=1, leaving CS permanently asserted after the
conversion. Fix by moving both calls into the out_unlock: block, after
keep_cs_asserted is cleared, matching the pattern already used in
ad_sd_calibrate().
In the error path of ad_sd_buffer_postenable(), if an operation fails
after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g.
spi_offload_trigger_enable()), the device is left in continuous
conversion mode with CS physically asserted. Additionally,
bus_locked remaining true after spi_bus_unlock() causes subsequent
SPI operations to call spi_sync_locked() without the bus lock actually
held, allowing concurrent SPI access.
Fix the error path by clearing keep_cs_asserted first, then calling
set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS,
then clearing bus_locked before releasing the bus.
For devices that implement neither set_mode nor disable_one (such as
MAX11205, which has no physical CS pin), no SPI transfer is issued
during cleanup and the cs_change flag has no effect on any physical
line.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64502In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64510In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus.Analyse NVD en cours Élevée CVSS 7 CVE-2026-64515In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.Analyse NVD en cours Élevée CVSS 8.3 CVE-2026-64516In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449)Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64520In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
(fixed cur_idx when exactly one descriptor in the first fragment)Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-64522In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64523In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64524In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults.Analyse NVD en cours Élevée CVSS 7.7 CVE-2026-64529In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-66012SiYuan before v3.7.2 contains a missing authorization vulnerability in the POST /mcp kernel endpoint, which is gated only by a general auth check (model.CheckAuth) with no admin-role or read-only enforcement. This exposes 31 MCP tools, including a file tool with list/read/write/delete/rename/copy actions across the entire workspace. When the Publish server is enabled in anonymous mode (Conf.Publish.Enable=true and Conf.Publish.Auth.Enable=false), the Publish reverse proxy attaches an anonymous RoleReader JWT to proxied requests, allowing a remote unauthenticated attacker to reach /mcp. The attacker can read conf/conf.json to extract accessAuthCode, api.token, and cookieKey in plaintext, write arbitrary files in the workspace, and plant a plugin into data/plugins/ that executes with nodeIntegration:true and no contextIsolation on the next desktop launch, leading to administrator takeover.Analyse NVD en cours Critique CVSS 10 CVE-2026-66013OpenRemote before 1.26.2 contains an authentication bypass vulnerability in the console registration API that allows unauthenticated attackers to update existing console assets by supplying a known asset identifier. Attackers can overwrite push notification tokens and console metadata without authentication or ownership validation, redirecting notifications or denying delivery to legitimate consoles.Analyse NVD en cours Critique CVSS 9.3 CVE-2026-66373Redis before 8.8.0, in the unusual case where an authenticated attacker can execute RESTORE, allows remote code execution via a RESTORE payload where the same NACK (pending entry) is referenced by more than one consumer, because deleting both consumers via XGROUP DELCONSUMER leads to a double free. NOTE: this issue exists because of an incomplete fix for CVE-2026-25243.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-66374Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path.Analyse NVD en cours Élevée CVSS 8.1 CVE-2025-71408NLTK (Natural Language Toolkit) before version 3.9.3 contains an eval injection vulnerability in the nltk.collocations module that allows an attacker who controls command-line arguments to execute arbitrary Python code. When collocations.py is invoked directly, the __main__ block passes command-line arguments directly to eval() as suffixes of BigramAssocMeasures without allowlist validation or sanitization, enabling an attacker to supply a Python expression that escapes the intended attribute lookup and executes arbitrary code including OS commands via the os module.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-10033The EventON Action User plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.5.14. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to grant EventON management capabilities and the upload_files capability to any non-administrator WordPress role or user, escalating their privileges within the site. The administrator role is protected by an early-return guard in update_role_caps(), so only non-administrator roles and individual users can be targeted; however, the same unauthenticated exposure also allows attackers to enumerate all WordPress users with their IDs and display names, disclose role and user capability state along with nonce values, and tamper with event-to-user term assignments. Élevée CVSS 7.3 CVE-2026-10610Local privilege escalation potentially allowed an attacker to execute arbitrary code as a privileged user.Analyse NVD en cours Élevée CVSS 8.5 CVE-2026-12496Stored Cross-Site Scripting (CWE-79) in the OPC XML-DA server statistics in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to execute arbitrary JavaScript in an administrator's browser (session hijacking, credential theft, device reconfiguration) via a crafted `User-Agent` header in a `POST /da` request. Élevée CVSS 8.7 CVE-2026-12497The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content WordPress plugin before 4.16.18 does not consistently enforce the role restriction configured on its front-end registration role-selection field. The set of roles offered to the visitor and the set of roles the registration handler accepts are derived by two different parsers, and for some valid ways of configuring the offered roles the handler ignores the restriction and falls back to accepting any non-administrator role. Combined with the absence of a nonce on the public registration handler, this allows an unauthenticated visitor to register an account with a higher role, such as Editor or Author, than the form was configured to offer. Élevée CVSS 7.5 CVE-2026-12502Improper Privilege Management (CWE-269) in `/usr/bin/ltsudo` in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows a `superadmin`-group attacker to reset the password of any LARM user (including the `larmapp` service account) via the `set-passwd` subcommand. Élevée CVSS 8.4 CVE-2026-12503Improper Link Resolution (CWE-59) in `/usr/bin/larm_starter` in Loytec L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an authenticated `larmapp` attacker to make `/etc/passwd` writable by the `larmapp` group (leading to root privilege escalation) via a symlink attack on `/etc/lighttpd/ssl/server.pem`. Critique CVSS 9.2 CVE-2026-12504Improper Authentication (CWE-287) in the PAM configuration in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows a local attacker to authenticate as a uid=0 account without a password and obtain a root shell via an `/etc/passwd` entry with an empty password field. Élevée CVSS 8.4 CVE-2026-12736The Wpify Woo plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 5.4.16. This is due to the SettingsApi::save_option() REST route (POST /wp-json/wpify-woo/v1/option) passing the request-supplied 'option' and 'data' parameters directly to update_option() without any option-name allowlist or value sanitization, while the permission_callback only verifies the manage_woocommerce capability. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to elevate their privileges to Administrator by overwriting arbitrary WordPress options (for example setting default_role to administrator and users_can_register to 1, or disabling security plugins via active_plugins). Élevée CVSS 8 CVE-2026-12877The Project Management, Bug and Issue Tracking Plugin WordPress plugin before 5.1.0 does not sanitise and escape user supplied input before using it in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks. This is exploitable in the Project Management, Bug and Issue Tracking Plugin WordPress plugin before 5.1.0's standard front-end issue-tracker configuration. Critique CVSS 9.1 CVE-2026-12981The CAFEHAUS API WordPress plugin through 1.0.0 does not have any authentication or authorisation when updating user passwords, allowing unauthenticated attackers to set the password of any user, including administrators, and fully take over their accounts. Élevée CVSS 7.5 CVE-2026-14172Rapid7 InsightVM, Nexpose, and the Insight Agent execute discovered executables during authenticated assessment without validating file ownership, allowing a local low-privileged user to run code as the scan credential (Scan Engine) or as root/SYSTEM (Insight Agent). Fixed in Scan Engine content 1.1.3935 and Insight Agent content component 0.0.245.0.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-14603The WowOptin: Next-Gen Popup Maker WordPress plugin before 1.4.38 does not have proper authorization on a REST endpoint, allowing unauthenticated users to disable all of the site's opt-in forms and insert new template-based opt-in rows into the database. Élevée CVSS 7.5 CVE-2026-15243Apereo CAS Client accepts any CA-trusted certificate for any hostname, provided the URL the client is calling matches the configured allowlist or regex. An attacker with a MITM position (DNS poisoning, rogue Wi-Fi, malicious proxy, etc.) can provide any CA-signed certificate for a hostname that matches the configured allowlist or regex. This can lead to intercepting the CAS exchange, capturing the Ticket-Granting Ticket (TGT), and subsequently obtaining Service Tickets on behalf of the victim.
Because maintainers contact attempts were unsuccessful, vulnerabilities have only been confirmed in version 4.1.0 (Java Apereo CAS Client) and 3.6.4 (Jasig CAS Client) but may also affect other versions.Analyse NVD en cours Élevée CVSS 7.4 CVE-2026-15401The VikBooking Hotel Booking Engine & PMS plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'vbfX' parameter in all versions up to, and including, 1.8.13 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vbfX custom-field value is stored via the public-facing saveorder task, which has no capability or authentication check enforced by default, enabling fully unauthenticated submission of malicious payloads. Élevée CVSS 7.2 CVE-2026-15704In Eclipse BaSyx Go Components versions up to and including 1.0.0, ABAC-enabled deployments are vulnerable to an authorization bypass caused by inconsistent trailing-slash handling between the ABAC middleware and the HTTP router.
The shared router configuration used Chi's `middleware.StripSlashes`, so a request such as `GET /shells/` was dispatched to the registered `GET /shells` route. However, the ABAC middleware evaluated the original request path including the trailing slash. If ABAC route lookup did not find a matching slash-suffixed route, the request was passed onward and the router then stripped the slash and executed the protected handler without the intended ABAC authorization decision and without the expected ABAC query filters.
An unauthenticated or unauthorized network attacker could append a trailing slash to protected API routes to reach handlers that should have been denied by ABAC policy. Depending on the exposed component, HTTP method, and deployed policy, this could allow unauthorized read, create, update, delete, or upload operations.
The issue affects ABAC-enabled deployments of services that use the shared router and ABAC middleware, including AAS Repository, Submodel Repository, AAS Registry, Submodel Registry, Concept Description Repository, Discovery, AAS Environment upload, and related services. The issue is fixed in Eclipse BaSyx Go Components v1.0.1.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-15810A Cross-Site Scripting (XSS) vulnerability in Google Cloud Looker versions prior to 25.6.103, 25.12.65, 25.18.68, 26.0.66, 26.2.47, 26.4.36, 26.6.28, and 26.8.7 on Looker-hosted and Self-hosted allows an attacker to execute arbitrary JavaScript leading to administrative account takeover using a maliciously crafted URL.
Looker-hosted and Self-hosted were found to be vulnerable.
This issue has already been mitigated for Looker-hosted instances. No user action is required for these.
Self-hosted instances must be upgraded to the patched versions: 25.6.103+, 25.12.65+, 25.18.68+, 26.0.66+, 26.2.47+, 26.4.36+, 26.6.28+, or 26.8.7+.Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-16280An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-16519A
DLL hijacking vulnerability exists in the GeoVision GV-IP Device Utility
desktop application. The application loads one or more dynamic-link libraries
(DLLs) from an unsafe search path, allowing a local attacker to place a
malicious DLL in a location searched before the legitimate library
location.Analyse NVD en cours Élevée CVSS 7.3 CVE-2026-16634TOML::XS versions before 0.06 for Perl bundle an unsupported and vulnerable version of tomlc99.
The tomlc99 library is no longer maintained, and has an uncontrolled recursion vulnerability publicly reported in the issue tracker.
Any caller that passes untrusted TOML to from_toml risks a stack overflow from a deeply-nested document.
TOML::XS version 0.06 or later uses the successor tomlc17 library. Critique CVSS 9.8 CVE-2026-16800Improper control of generation of code ('Code Injection') in the schedule feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with schedule creation permission to execute arbitrary PowerShell code via crafted schedule parameter names concatenated into a script invocation.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-16801Improper control of generation of code ('Code Injection') in the variables feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with variable write permission to execute arbitrary PowerShell code via a crafted variable value that is not properly escaped when written to the variables configuration file.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-16870Multiple security vulnerabilities in Snowflake libsnowflakeclient versions prior to 2.9.2 could allow remote code execution and credential exfiltration. A stack-based buffer overflow in the file download path could allow remote code execution on a victim host. An attacker could exploit this by uploading a file with a crafted encryption metadata field to a shared internal stage that a victim process later downloads, and impact would be limited to deployments where principals with different privilege levels share the same internal stage. A related out-of-bounds write in the same download path could allow memory corruption with attacker-controlled write primitives. An attacker may exploit this through a crafted initialization vector metadata field on a shared stage, and impact would be limited by the same stage-write precondition. Improper validation of connection parameters could allow an attacker-controlled input to redirect outbound authentication requests — including credentials and tokens — to an attacker-controlled endpoint. Impact is limited to embedding deployments where a lower-privileged principal can influence connection configuration while higher-privileged service credentials are in use. The fix is available in Snowflake libsnowflakeclient version 2.9.2. The Snowflake PHP PDO Driver and Snowflake ODBC Driver embed the affected library; fixes are available in versions 4.1.0 and 3.19.0 respectively. Users must manually upgrade.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-17107A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster.Analyse NVD en cours Élevée CVSS 8.5 CVE-2026-24727An unrestricted upload of file with dangerous type vulnerability in the e-paper draft upload function of SUNNET Corporate Training Management System through v10.3 allows remote authenticated users with administrator privileges to execute arbitrary commands by uploading a crafted ZIP archive containing a server-executable file.Analyse NVD en cours Critique CVSS 9.3 CVE-2026-35425Improper access control in Azure API Management (APIM) allows an authorized attacker to execute code over a network.Analyse NVD en cours Élevée CVSS 8 CVE-2026-45811Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Apache NimBLE.
The HCI socket transport did not check whether a received HCI event would fit the configured event pool before copying it, allowing a buffer overflow. Severity is low: exploitation requires either a misconfigured pool size or a malicious/compromised controller on the other end of the HCI socket link, not over-the-air Bluetooth access.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue.Apache Nimble Élevée CVSS 7.5 CVE-2026-45813Out-of-bounds Write, Integer Underflow (Wrap or Wraparound) vulnerability in Apache NimBLE BASS service.
Improper validation when parsing BASS service "Add Source" and "Modify Source" operation PDU could results in stack buffer overflow or arbitrary out-of-bound read.
This can be triggered by nearby devices over Bluetooth connection, however pairing is required prior to accessing BASS service, which depending on device configuration may or may not require user action.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue.Apache Nimble Élevée CVSS 8.8 CVE-2026-45815Reachable Assertion vulnerability in Apache NimBLE.
A specially crafted ATT Read Multiple Variable Response (BLE_ATT_OP_READ_MULT_VAR_RSP) may trigger assert in ATT parser.
Severity is medium as this requires DUT to first send ATT Read Multiple Variable Request.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue.Apache Nimble Élevée CVSS 7.5 CVE-2026-45816NULL Pointer Dereference vulnerability in Apache NimBLE in LE Long Term Key Request event.
This requires disabled asserts (otherwise assert would trigger before NULL dereference) and bogus (or misbehaving) controller, thus severity is low.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue.Apache Nimble Élevée CVSS 7.5 CVE-2026-48021In epa4all, prior to version 2026-05-20, an attacker who can intercept the TLS connection between epa4all and the ePA backend can complete the VAU handshake with attacker-controlled keys and obtain the session encryption keys. All inner HTTP traffic (patient consent decisions, medication data, document operations, authorization tokens, and entitlement queries) becomes readable and modifiable. The attacker can also inject arbitrary requests through the hijacked channel. This issue has been patched in version 2026-05-20.Analyse NVD en cours Critique CVSS 9.1 CVE-2026-48032Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, IAM-role policy checks can be bypassed when the role trusts multiple OIDC providers. This issue has been patched in version 1.4.0.Analyse NVD en cours Élevée CVSS 8.3 CVE-2026-48033Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, policy packs can be bypassed by a forged Pulumi-URN logical name. This issue has been patched in version 1.4.0.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-48034Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, there is a bypass via decoy sibling resources targeting a different bucket. This issue has been patched in version 1.4.0.Analyse NVD en cours Élevée CVSS 8.5 201–300 / 5155 CVE