cve
Veille des vulnérabilités Archive complète
identifiantvulnérabilitésévéritépublié
CVE-2026-14802A vulnerability was detected in react create-react-app up to 5.0.1 on macOS. This affects the function startBrowserProcess of the file openBrowser.js of the component react-dev-utils. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. Élevée CVSS 7.3 CVE-2026-14807ERP App developed by PROG MIS has a Use of Hard-coded Credentials vulnerability, allowing unauthenticated remote attackers to log in to view application code and obtain the database account and password. Critique CVSS 9.8 CVE-2026-14808Prog
Management System developed by PROG MIS has a Exposure of Sensitive
Information vulnerability, allowing unauthenticated remote attackers to view
a specific page and obtain the database account and password. Critique CVSS 9.8 CVE-2026-14809Prog Management System developed by PROG MIS has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents. Élevée CVSS 7.5 CVE-2026-21379Memory Corruption when allocating memory with sizes that exceed the maximum allowed value.Qualcomm Aqt1000 Firmware Élevée CVSS 7.8 CVE-2026-21383Cryptographic Issue when using a static initialization vector for AES-GCM key wrapping, which requires a unique value for each call to ensure security.Qualcomm Fastconnect 6900 Firmware Élevée CVSS 7.1 CVE-2026-24012Uncontrolled Resource Consumption vulnerability in Apache IoTDB.
Some interface fails to impose reasonable
limits on the time span and aggregation interval of the query. An attacker
can construct a request with extreme parameters (e.g., a very large time
range combined with a minimal interval). This forces the DataNode to build
an enormous result set in memory, which exhausts the Java heap and causes
the DataNode process to crash.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue.Apache Iotdb Élevée CVSS 7.5 CVE-2026-24013Authentication Bypass by Spoofing vulnerability in Apache IoTDB.
Certain Thrift RPC query handlers lack strict validation of the sessionId
parameter. An attacker can construct requests with a forged sessionId and,
without performing openSession authentication, receive valid query results.
This allows authentication bypass and unauthorized reading of time-series
data.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue.Apache Iotdb Critique CVSS 9.1 CVE-2026-24014Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue.Apache Iotdb Critique CVSS 9.8 CVE-2026-25268Memory Corruption when processing invalid HT40 channel layouts during dynamic channel switching operations.Qualcomm Wsa8835 Firmware Élevée CVSS 8.8 CVE-2026-25271Memory Corruption when processing asynchronous input parameters due to improper handling of modified values between check and use.Qualcomm Cologne Firmware Élevée CVSS 7 CVE-2026-34038Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.469, an authenticated remote command injection vulnerability in application deployment handling allows users with application write permissions to achieve remote code execution and exfiltrate sensitive environment variables through deployment logs via fields such as dockerfile_location and deployment commands. This issue is fixed in version 4.0.0-beta.469. Critique CVSS 9.9 CVE-2026-34153Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, LocalFileVolume::saveStorageOnServer builds shell commands using unescaped fs_path and parent_dir values before validation, and submitFileStorage does not validate the user-controlled file-mount path before creating a volume, allowing an authenticated user who can add file storage to execute commands when the storage is saved. This issue is fixed in version 4.0.0-beta.471. Élevée CVSS 8.8 CVE-2026-34599Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, there is an authenticated command injection vulnerability in the GetLogs Livewire component which allows users with team membership (lowest privilege member role) to execute arbitrary commands as root on managed servers. The $container Livewire public property is interpolated directly into shell commands (docker logs, docker service logs) without sanitization, and can be modified by any client via the Livewire wire protocol because it lacks the #[Locked] attribute. This issue is fixed in version 4.0.0-beta.471. Élevée CVSS 8.8 CVE-2026-38976mrubyc through 3.4.1 was found to contain a NULL pointer dereference in src/vm.c in op_super() / OP_SUPER due to a missing runtime guard for top-level super. Élevée CVSS 7.5 CVE-2026-40047Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component.
The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth.
This issue affects Apache Camel: from 4.15.0 before 4.18.3.
Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers.Apache Camel Critique CVSS 9.1 CVE-2026-40138A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support and Privileged Remote Access. Improper validation of authentication data may allow a network-positioned attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabledBeyondtrust Privileged Remote Access Élevée CVSS 8.1 CVE-2026-40139A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support. Improper processing of authentication requests may allow an unauthenticated remote attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled.Beyondtrust Privileged Remote Access Critique CVSS 9.8 CVE-2026-40140BeyondTrust Remote Support and Privileged Remote Access contain a high-severity pre-authentication vulnerability in the network communication subsystem. Insufficient validation of client-supplied input may allow an unauthenticated remote attacker to trigger a denial-of-service condition affecting appliance availability.Beyondtrust Privileged Remote Access Élevée CVSS 7.5 CVE-2026-40141A high-severity vulnerability exists in a web application component of BeyondTrust Remote Support and Privileged Remote Access related to the processing of certain input parameters. Insufficient validation of user-supplied input may allow an authenticated attacker with limited privileges to access unintended resources or data beyond their authorization scope. Exploitation is restricted to accounts with specific permissions.Beyondtrust Privileged Remote Access Critique CVSS 9.9 CVE-2026-40859Deserialization of Untrusted Data vulnerability in Apache Camel.
The camel-vertx-http component deserializes HTTP response bodies carrying the Content-Type application/x-java-serialized-object using a raw java.io.ObjectInputStream, without applying any ObjectInputFilter (VertxHttpHelper.deserializeJavaObjectFromStream) This deserialization path is reached only when the producer endpoint is configured with transferException=true (or the component-level allowJavaSerializedObject=true) and throwExceptionOnFailure is left at its default value of true; in that case a backend HTTP response with a 5xx status and the application/x-java-serialized-object content type has its body deserialized with no class restrictions. An attacker who controls the backend the Camel producer talks to - through a man-in-the-middle position on an unencrypted (plain HTTP) connection, or by compromising the backend service - can return a crafted serialized Java object and, if a suitable gadget chain is present on the classpath, achieve remote code execution on the Camel application host. The path is not reachable in the default configuration, where transferException is false.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.20.0.
Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the deserialization performed by both helper utilities is constrained by a default ObjectInputFilter (allow-list java.**;javax.**;org.apache.camel.**;!*), which can be customised through the new deserializationFilter endpoint option or the JVM-wide -Djdk.serialFilter system property. For deployments that cannot upgrade immediately: do not enable transferException=true (or allowJavaSerializedObject=true) on producers that talk to untrusted or network-reachable backends; ensure producer connections use TLS (https) so that a response cannot be substituted by a man-in-the-middle; and, where the option is required, set an explicit -Djdk.serialFilter allow-list (for example java.**;org.apache.camel.**;!*) to constrain deserialization.Apache Camel Élevée CVSS 8.1 CVE-2026-42153Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.474, PostgreSQL healthcheck command generation used attacker-controlled database settings (postgres_user and postgres_db) in shell-form commands, allowing an authenticated user to inject commands executed in the database container. This issue is fixed in version 4.0.0-beta.474. Élevée CVSS 8.8 CVE-2026-42204Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. From 4.0.0-beta.471 through 4.0.0-beta.473, a regression in SHELL_SAFE_COMMAND_PATTERN allowed ampersands in custom Docker Compose build, start, and pre/post-deployment command fields, allowing an authenticated team member to inject shell commands that execute on the host. This issue is fixed in version 4.0.0-beta.474. Élevée CVSS 8.8 CVE-2026-42331FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the Guest API invoice/update endpoint is missing an authorization check present in other invoice-related endpoints, allowing an unauthenticated user with knowledge of an invoice hash to modify the payment gateway associated with an unpaid invoice. An attacker who obtains an invoice hash, which may leak through shared URLs, referrer headers, or email links, can change the `gateway_id` on an unpaid invoice to any payment gateway configured in the system. This does not allow redirecting payments to an arbitrary external endpoint, as the gateway must already be installed and configured by an administrator. The practical impact is further limited by the `invoice_accessible_from_hash` system setting. Version 0.8.0 contains a patch. No known workarounds are available. Élevée CVSS 7.7 CVE-2026-42341FOSSBilling is a free, open-source billing and client management system. Versions 0.6.0 through 0.7.2 have an unauthenticated payment bypass vulnerability in FOSSBilling's IPN callback endpoint. When the Custom payment adapter is enabled, an attacker can mark any unpaid invoice as paid and credit the associated client account without making an actual payment, by sending a single crafted HTTP request. Version 0.8.0 patches the issue. Some workarounds are available. Disable the Custom payment gateway if not actively needed and/or restrict access to `/ipn.php` at the web server level (e.g., via IP allowlisting), noting that this may interfere with legitimate payment callback processing. Critique CVSS 9.2 CVE-2026-4249The throttling event handling mechanism in multiple WSO2 products accepts user-supplied JSON payloads without sufficient validation of their structure and content. This allows an unauthenticated remote attacker to inject malicious JSON data that can lead to a persistent denial of service condition.
Successful exploitation of this vulnerability can disrupt the API Gateway, preventing legitimate API traffic from being processed and impacting complete service availability. The denial of service is persistent, requiring manual intervention to restore normal operations.Wso2 Api Control Plane Élevée CVSS 8.6 CVE-2026-42527Deserialization of Untrusted Data vulnerability in Apache Camel.
The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository).
This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**).Apache Camel Élevée CVSS 8.1 CVE-2026-43825Untrusted Java Deserialization in Apache OpenNLP SvmDoccatModel
Versions Affected:
before 3.0.0-M4 (libsvm document categorization module; introduced in
OPENNLP-1808 and only present on the 3.x line)
Description:
SvmDoccatModel.deserialize(InputStream) reads an attacker-controlled
stream with java.io.ObjectInputStream and calls readObject() without an
ObjectInputFilter installed. ObjectInputStream materialises every class
referenced in the stream before the resulting object is cast to
SvmDoccatModel, so the cast that follows readObject() executes only
after the foreign object graph has already been deserialised in full.
If a Java deserialization gadget chain is available on the consumer's
classpath, a crafted payload supplied to
deserialize() executes arbitrary code in the JVM that loads it. Apache
OpenNLP itself does not ship a known gadget chain, so the realistic
risk is to downstream applications that embed the libsvm module
alongside vulnerable transitive dependencies. The method is public and
static, so any caller can pass an untrusted stream to it directly.
The practical impact is remote code execution against processes that
load SvmDoccatModel instances from untrusted or semi-trusted origins.
Mitigation:
3.x users should upgrade to 3.0.0-M4.
Users who cannot upgrade immediately should treat all serialized
SvmDoccatModel streams as untrusted input unless their provenance is
verified, and should avoid invoking SvmDoccatModel.deserialize() on
streams supplied by end users or fetched from third-party sources
without integrity checks.Apache Opennlp Élevée CVSS 7.3 CVE-2026-43865Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component.
The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.Apache Camel Élevée CVSS 8.1 CVE-2026-43866Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.
JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.
This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.Apache Camel Élevée CVSS 7.3 CVE-2026-43867Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.Apache Camel Critique CVSS 9.8 CVE-2026-43918FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, when a client or staff/admin account is suspended or marked inactive, existing authenticated sessions are not invalidated. The session identity loaders in src/di.php (loggedin_client and loggedin_admin) only reject sessions if the backing account record no longer exists in the database. They do not verify that the account's status is still active. This allows a suspended or deactivated user to retain full access until their session naturally expires. This issue has been fixed in version 0.8.0. Élevée CVSS 8.7 CVE-2026-43921FOSSBilling is a free, open-source billing and client management system. Versions 0.6.10 through 0.7.2 have a PHP code injection vulnerability in FOSSBilling's `Config::prettyPrintArrayToPHP()` method. When configuration values are updated, string values are written into `config.php` without escaping single quotes. Because `config.php` is loaded via a bare `include` on every HTTP request, an attacker with admin privileges can inject arbitrary PHP code that executes on every subsequent request. Version 0.8.0 contains a patch. Some workarounds are available. Restrict admin access to trusted personnel only; audit `config.php` for unexpected PHP code; and/ or at the reverse proxy/WAF level, restrict access to admin API endpoints that modify configuration. Élevée CVSS 8.9 CVE-2026-44934A information disclosure when DEBUG loglevel is set in SUSE Rancher AI Agent 1.0 before 1.0.2 could leak API keys or LLM response text with potential sensitive data into logfiles, allowing local attackers to misuse respective gained data or credentials.Analyse NVD en cours Élevée CVSS 7 CVE-2026-44937Potential forgery of webhook requests when using a unauthenticated webhook in SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.5 could be used by remote attackers to cause a denial of service or a downgrade attack on other repositories on the system.Suse Rancher Fleet Élevée CVSS 8.2 CVE-2026-46454Improper Input Validation vulnerability in Apache Camel Cometd Component.
The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.Apache Camel Critique CVSS 9.8 CVE-2026-46455Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component.
The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.Apache Camel Critique CVSS 9.8 CVE-2026-46456Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.Apache Camel Critique CVSS 9.8 CVE-2026-46457Improper Input Validation vulnerability in Apache Camel NATS component.
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.Apache Camel Élevée CVSS 7.5 CVE-2026-46585Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component.
The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).Apache Camel Élevée CVSS 7.5 CVE-2026-46587Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.Apache Camel Élevée CVSS 7.3 CVE-2026-46588Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.Apache Camel Élevée CVSS 7.3 CVE-2026-46590Deserialization of Untrusted Data vulnerability in Apache Camel PQC component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered.
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.Apache Camel Élevée CVSS 8.8 CVE-2026-46591Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.
The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.
This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.Apache Camel Élevée CVSS 8.2 CVE-2026-46592Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.
The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.Apache Camel Élevée CVSS 7.5 CVE-2026-46726Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component.
The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.Apache Camel Élevée CVSS 7.5 CVE-2026-48203Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.Apache Camel Critique CVSS 9.1 CVE-2026-48204Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.
The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.Apache Camel Critique CVSS 9.8 CVE-2026-48205Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component.
The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.Apache Camel Critique CVSS 9.1 CVE-2026-48316ColdFusion versions 2025.9, 2023.20 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction. Scope is changed.Adobe Coldfusion Critique CVSS 10 CVE-2026-48614An improper authorization vulnerability in the Plesk XML API allows an authenticated user to inject arbitrary configuration directives, resulting in arbitrary file write as root and full privilege escalation on the underlying server. Critique CVSS 9.9 CVE-2026-49042Improper Input Validation vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0.
Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.Apache Camel Élevée CVSS 7.3 CVE-2026-49297Apache Airflow's Google provider operators `GCSToSFTPOperator` and `GCSTimeSpanFileTransformOperator` joined GCS object names returned by the bucket listing API directly to a destination filesystem path without normalisation or containment check. A user with write access to the source GCS bucket (typically a different trust principal than the DAG author — partner uploads, ingest-only service accounts, public-data buckets) could create an object whose name contains `..` segments and cause the DAG run to write the downloaded blob outside the configured destination (the SFTP `destination_path` for `GCSToSFTPOperator`; the worker-local temp directory for `GCSTimeSpanFileTransformOperator`), enabling overwrite of arbitrary files on the SFTP server or the worker host. Affects deployments that ingest from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` 22.2.1 or later.Apache Apache-airflow-providers-google Élevée CVSS 8.1 CVE-2026-5268An authentication bypass vulnerability exists in
the default SFTP server component utilized across the Ciena products listed. This vulnerability allows a remote, unauthenticated attacker to bypass
security controls and gain unauthorized access to the underlying filesystem.
Successful exploitation could allow an attacker to read or modify system files.Analyse NVD en cours Critique CVSS 9.1 CVE-2026-53643FOSSBilling is a free, open-source billing and client management system. Versions prior to 0.8.0 allow low-privileged staff accounts to perform unauthorized actions via admin API endpoints. The root cause is a combination of the `can_always_access` module flag (which grants all staff access to certain modules) and insufficient permission checks or unsafe parameter handling on individual endpoints. Version 0.8.0 contains a fix. Some workarounds are available. Restrict staff accounts to only those who need access to sensitive settings and/or use a reverse proxy or WAF to restrict access to the affected endpoints to trusted IP addresses or higher-privilege roles. Élevée CVSS 8.7 CVE-2026-53644FOSSBilling is a free, open-source billing and client management system. Versions 0.5.3 through 0.7.2 allow authenticated clients to both read and reset API key service secrets for orders that are no longer in an `active` state (e.g., `suspended`, `canceled`). The root cause is missing order-state validation in two client API endpoints, despite an `isActive()` helper already existing in the `Serviceapikey` module and the frontend UI correctly gating access on `order.status == 'active'`. Version 0.8.0 contains a fix. Some workarounds are available. If the `Serviceapikey` module is not needed, uninstall it to remove the affected endpoints. One may also use a reverse proxy or WAF to restrict access to `/api/client/order/service` and `/api/client/serviceapikey/reset` based on application-level order-state logic. Élevée CVSS 8.6 CVE-2026-53645FOSSBilling is a free, open-source billing and client management system. Versions prior to 0.8.0 allow a low-privileged staff account to grant arbitrary module permissions to itself through the admin API, resulting in persistent privilege escalation. A staff user that only has `staff.create_and_edit_staff` can call `/api/admin/staff/permissions_update` targeting their own account and write any permission structure, bypassing the intended role-based access control boundary. Version 0.8.0 patches the issue. Some workarounds are available. Restrict the `staff.create_and_edit_staff` permission to only highly trusted staff members and/or use a reverse proxy or WAF to restrict access to `/api/admin/staff/permissions_update` to specific trusted roles. Élevée CVSS 8.5 CVE-2026-53646FOSSBilling is a free, open-source billing and client management system. In versions 0.5.6 through 0.7.2, when a `ClientPasswordReset` record already exists for a client (from a previous unexpired reset request), subsequent calls to the `reset_password` guest API endpoint reuse the existing token instead of generating a new one. The 15-minute validity window is anchored to the first request's `created_at` timestamp, not the time of the most recent email. An attacker who obtained the original reset link remains able to use it even after the victim requests a new reset, because the original token is never invalidated or rotated. Version 0.8.0 patches the issue. Some workarounds are available. Configure a reverse proxy (e.g., Nginx, Apache, Cloudflare) to apply per-IP rate limiting to the `/client/reset-password` endpoint to minimize the window of opportunity, and/or manually clear expired `client_password_reset` records from the database after a client reports a suspected compromise. Élevée CVSS 7.7 CVE-2026-53913Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component.
The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains.
This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.Apache Camel Critique CVSS 9.8 CVE-2026-54059Pillow is a Python imaging library. Prior to 12.3.0, PIL/PcfFontFile.py _load_bitmaps() read glyph dimensions from the PCF METRICS section and passed them directly to Image.frombytes() without calling Image._decompression_bomb_check(), allowing crafted PCF font data to cause excessive memory allocation. This issue is fixed in version 12.3.0.Python Pillow Élevée CVSS 7.5 CVE-2026-54060Pillow is a Python imaging library. Prior to 12.3.0, PIL/FontFile.py FontFile.compile() assembled per-glyph images into a combined bitmap with Image.new("1", (xsize, ysize)) without calling Image._decompression_bomb_check(), allowing a font to trigger excessive allocation during conversion or saving. This issue is fixed in version 12.3.0.Python Pillow Élevée CVSS 7.5 CVE-2026-54234vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Prior to 0.24.0, a frontend-legal multi-request speculative decoding workload can cause the rejection sampler to produce a recovered token equal to the model vocabulary size boundary value, which is then converted to negative one when the engine selects the next live token for a request and is written back into the drafter's input ids; that out-of-vocabulary value is later consumed by the model's embedding and attention path and crashes the engine worker with a GPU device-side assertion. The same triggering request sequence is reachable through the public gRPC Generate and Abort endpoints, so a remote client that can send generation requests can crash the shared engine worker, aborting concurrent requests and causing a service-wide denial of service for other clients of the deployment until the worker is restarted. This issue is fixed in version 0.24.0.Vllm Élevée CVSS 7.5 CVE-2026-54763Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.Traefik Critique CVSS 10 CVE-2026-54765Traefik is an open source HTTP reverse proxy and load balancer. From v3.7.0 prior to v3.7.6, Traefik's Kubernetes Gateway API provider may resolve two accepted HTTPRoutes that target the same backend Service:port but configure different backendRef filters to the same child service and apply only one route's filter set to all requests reaching that backend. In Gateway deployments where backendRef filters set security-sensitive headers, such as tenant identity, authorization context, or values the backend trusts, an attacker who can create an accepted HTTPRoute sharing the same backend Service:port may cause their route's filter context to be applied to another route's requests, potentially crossing namespace boundaries when a ReferenceGrant permits cross-namespace targeting. This issue is fixed in version v3.7.6.Traefik Élevée CVSS 8.5 CVE-2026-55379Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing Pillow's documented decompression bomb protection and allowing excessive memory allocation. This issue is fixed in version 12.3.0.Python Pillow Élevée CVSS 7.5 CVE-2026-55380Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger excessive C-heap allocation when loaded. This issue is fixed in version 12.3.0.Python Pillow Élevée CVSS 7.5 CVE-2026-55574vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Prior to 0.24.0, the structured_outputs.regex API parameter passes a user-supplied regular expression string directly to the grammar compiler backends with no compilation timeout; in the xgrammar backend the string reaches the regex compiler with no guard, and in the outlines backend the validation step blocks structural issues such as lookarounds and backreferences but performs no complexity analysis, so a pattern with nested quantifiers passes all checks and causes exponential state-space expansion, allowing a single request containing an adversarial regex to hang an inference worker indefinitely and deny service. This issue is fixed in version 0.24.0.Vllm Élevée CVSS 7.5 CVE-2026-55727A flaw in the authentication mechanism for video stream requests in Genetec Security Center 5.14.0.0 prior to build 5.14.178.18 may allow an unauthenticated attacker to access live video streams.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-55993Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component.
The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.Apache Camel Élevée CVSS 7.5 CVE-2026-55994Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component.
The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets.
This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.Apache Camel Élevée CVSS 7.5 CVE-2026-56140Improper Input Validation vulnerability in Apache Camel AWS SNS component.
The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.Apache Camel Critique CVSS 9.8 CVE-2026-56810Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint (Mint.HTTP1 module) allows a denial of service via an oversized chunked transfer-encoded response.
This vulnerability is associated with program files lib/mint/http1.ex and program routines 'Elixir.Mint.HTTP1':decode_body/5, 'Elixir.Mint.HTTP1':add_body_to_buffer/2.
When Mint decodes a chunked HTTP response body, it accumulates each partial fragment of the current chunk in the connection's data_buffer (an unbounded iolist) via add_body_to_buffer/2 and does not emit the data to the caller until the full declared chunk length has been received. The chunk size is taken directly from the server and parsed with no upper bound, so a malicious or compromised server can announce one enormous chunk (for example a size line of 7FFFFFFF, about 2 GiB) and then send the body bytes slowly without ever completing the chunk. The client buffers every received byte while it waits for a completion that never arrives, and because no data responses are produced until the chunk finishes, a caller that otherwise streams large content-length bodies safely gains no protection. An unauthenticated remote server (reachable whenever a client follows redirects, fetches user-supplied URLs, or processes webhooks) can drive the client's memory arbitrarily high and trigger an out-of-memory condition.
This issue affects mint: from 0.5.0 before 1.9.1. Élevée CVSS 8.7 CVE-2026-57571Crawl4AI is an open-source LLM-friendly web crawler and scraper. Prior to 0.9.0, when the crawler saves a downloaded file, the destination filename was taken from attacker-influenced input and joined to the downloads directory with no confinement. A filename containing an absolute path or traversal escaped the downloads directory, giving an arbitrary file write with attacker-controlled contents; the HTTP crawler path uses the response Content-Disposition filename and the browser crawler path uses the download's suggested filename. Because the written bytes are attacker-controlled, this can escalate to remote code execution. This issue is fixed in version 0.9.0.Kidocode Crawl4ai Critique CVSS 9.6 CVE-2026-57572Crawl4AI is an open-source LLM-friendly web crawler and scraper. Prior to 0.9.0, the Docker API server accepted request-supplied browser_config.extra_args, which flowed into Chromium's launch arguments. An attacker could inject Chromium switches that replace a child-process launch command together with --no-zygote, causing Chromium to fork or exec an attacker-controlled command as the container's runtime user. The Docker API is unauthenticated by default, so a single request yields arbitrary command execution. This issue is fixed in version 0.9.0.Kidocode Crawl4ai Critique CVSS 10 CVE-2026-57573Crawl4AI is an open-source LLM-friendly web crawler and scraper. Prior to 0.9.0, the Docker API server applied its SSRF destination check on the non-streaming /crawl path but not on the streaming path. handle_stream_crawl_request passed seed URLs straight to the crawler with no destination validation, allowing a remote unauthenticated client to call POST /crawl/stream or POST /crawl with crawler_config.stream=true with a URL pointing at an internal, private, or link-local address; the server fetched it and streamed the response body back. This issue is fixed in version 0.9.0.Kidocode Crawl4ai Élevée CVSS 8.6 CVE-2026-58226Inefficient Algorithmic Complexity vulnerability in elixir-mint hpax allows unauthenticated denial-of-service via unbounded HPACK integer decoding.
hpax decodes HPACK variable-length integers with no upper bound on the decoded value or the number of continuation octets. 'Elixir.HPAX.Types':decode_remaining_integer/3 accumulates the integer as int + (value <<< m), shifting by 7 more bits for each continuation octet and stopping only on a terminating octet or truncated input, never because the integer grew too large. Because BEAM integers are arbitrary precision, a run of N continuation octets builds an O(N)-bit bignum and re-adds into an ever-larger bignum on each step, so the total decoding cost is superlinear (about O(N^2)). An unauthenticated attacker who can send an HTTP/2 header block to a server using this decoder (reached through the 'Elixir.HPAX':decode/2 entry point) can supply a small header block that forces a large, attacker-controlled amount of CPU (and transient memory), a denial-of-service amplification.
This issue affects hpax from 0.1.1 before 1.0.4. Élevée CVSS 8.7 CVE-2026-58380A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution.Gimp Élevée CVSS 7.8 CVE-2026-59194pnpm is a package manager. Prior to 10.34.4 and 11.7.0, a crafted patch entry could resolve outside the configured patches directory and cause pnpm patch-remove to delete an arbitrary reachable file. This vulnerability is fixed in 10.34.4 and 11.7.0.Pnpm Élevée CVSS 7.1 CVE-2026-59195pnpm is a package manager. Prior to 10.34.4 and 11.8.0, pnpm accepts package names from the env lockfile configDependencies section and uses those names directly when creating config dependency symlinks under node_modules/.pnpm-config. A malicious repository can commit a crafted pnpm-lock.yaml whose env-lockfile document contains a traversal-shaped config dependency name. During pnpm install, pnpm installs the config dependency and creates a symlink at a path derived from that name. This vulnerability is fixed in 10.34.4 and 11.8.0.Pnpm Élevée CVSS 8.2 CVE-2026-59196pnpm is a package manager. Prior to 10.34.4 and 11.7.0, a crafted lockfile alias could be joined directly under a hoisted node_modules directory. Traversal aliases could escape that directory, while reserved aliases such as .bin or .pnpm could overwrite pnpm-owned layout. This vulnerability is fixed in 10.34.4 and 11.7.0.Pnpm Élevée CVSS 7.1 CVE-2026-59712Leantime's Users::getUser method in the JSON-RPC API lacks proper authorization checks, allowing authenticated users to retrieve full user credential rows including password hashes, TOTP secrets, and session tokens. Attackers can exploit this by calling users.getUser with arbitrary user IDs to enumerate all accounts and obtain credentials for offline password cracking, 2FA bypass, and session hijacking. Élevée CVSS 8.1 CVE-2026-59713Leantime contains an OIDC login CSRF vulnerability in the verifyState() method that unconditionally returns true without validating state parameters. Attackers can craft malicious callback URLs with attacker-controlled authorization codes to perform session fixation, logging victims in as the attacker. Élevée CVSS 8.1 CVE-2026-6382The FileOrganizer WordPress plugin before 1.1.9, Advanced File Manager WordPress plugin before 5.4.12, File Manager Pro WordPress plugin before 2.1.1, File Manager WordPress plugin before 8.0.4 do not properly escape a parameter before passing it to a shell command when processing image operations, allowing authenticated users to perform OS Command Injection. This requires the server to have the ImageMagick convert CLI available without either the PHP imagick or GD extensions. Critique CVSS 9.1 CVE-2026-6900Improper certificate validation vulnerability in B&R Industrial Automation GmbH APROL.
This issue affects APROL: before R 4.4-01P5. Élevée CVSS 7.4 CVE-2026-6901Untrusted Search Path vulnerability in B&R Industrial Automation GmbH APROL.
This issue affects APROL: before R 4.4-01P5. Élevée CVSS 7.7 CVE-2026-9165A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane.Analyse NVD en cours Élevée CVSS 7.7 CVE-2026-9181Esri ArcGIS Server contains a directory traversal vulnerability. ArcGIS Enterprise on Kubernetes is not impacted. An unauthenticated attacker could exploit this issue by sending crafted path parameters. Successful exploitation could allow overwriting sensitive files on the system. Abuse of this issue can allow full administrative access to ArcGIS Server, with high impact to confidentiality, integrity, and availability. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes.Esri Arcgis Server Élevée CVSS 7.5 CVE-2026-9182Esri ArcGIS Server contains an unrestricted file upload vulnerability. An unauthenticated attacker could exploit this issue by uploading a crafted file to the affected endpoint. Successful exploitation could allow arbitrary file upload, potentially allowing for other attacks. This issue impacts all versions of ArcGIS Server on Windows and Linux 12.0 and prior. This issue does not impact ArcGIS Enterprise for Kubernetes.Esri Arcgis Server Critique CVSS 9.8 CVE-2026-12250Invocation of process using visible sensitive information vulnerability in TUBITAK BILGEM Software Technologies Research Institute Pardus Domain Joiner allows Excavation.
This issue affects Pardus Domain Joiner: from 0.5.2 before 0.5.4. Élevée CVSS 7.9 CVE-2026-14570Crypt::DSA versions before 1.22 for Perl draw the DSA signing nonce and private key from a biased random generator, leading to private-key recovery.
"Crypt::DSA::Util::makerandom forces the high bit of every value it returns to obtain an exactly N-bit integer for prime search. The signing nonce and the private key are drawn from makerandom. Because the high bit is always set, the result is not uniform: its top bit is fixed, producing insecure values."
An attacker who collects a modest number of signatures under an affected key, together with the public key, can recover the private key with a lattice attack.
Keys used to sign with an affected version should be considered compromised and new keys should be generated. Élevée CVSS 7.5 CVE-2026-14688A vulnerability was identified in itsourcecode Online Hotel Management System 1.0. The affected element is an unknown function of the file /admin/login.php. The manipulation of the argument email leads to sql injection. The attack may be initiated remotely. The exploit is publicly available and might be used. Élevée CVSS 7.3 CVE-2026-14690A weakness has been identified in SourceCodester Multi-Vendor Online Grocery Management System 1.0. This affects the function save_users of the file classes/Users.php. This manipulation causes improper authorization. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Élevée CVSS 7.3 CVE-2026-14695A vulnerability was found in SourceCodester Multi-Vendor Online Grocery Management System 1.0. This affects the function save_client of the file classes/Users.php of the component Registration Handler. The manipulation of the argument Name results in sql injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Élevée CVSS 7.3 CVE-2026-14700A security vulnerability has been detected in code-projects Internship Management System 1.0. The impacted element is an unknown function of the file employer/login.php of the component Employer Login Endpoint. The manipulation of the argument email/password leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. Élevée CVSS 7.3 CVE-2026-14705A vulnerability was determined in code-projects Online Examination 1.0. Affected by this issue is some unknown functionality of the file head.php. Executing a manipulation of the argument uname/password can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Élevée CVSS 7.3 CVE-2026-14713A security flaw has been discovered in SourceCodester Pizzafy E-Commerce System 1.0. This vulnerability affects unknown code of the file /admin/ajax.php?action=confirm_order. The manipulation of the argument ID results in sql injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. Élevée CVSS 7.3 CVE-2026-14719A flaw has been found in SourceCodester Onlne Examination & Learning Management System 1.0. The impacted element is an unknown function of the file register.php of the component Registration Endpoint. Executing a manipulation of the argument role can lead to improper privilege management. The attack can be executed remotely. The exploit has been published and may be used. The name of the affected product appears to have a typo in it. Élevée CVSS 7.3 CVE-2026-14721A vulnerability has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. This affects an unknown function of the file /goform/ConfigWirelessBase_5g of the component Web Endpoint. The manipulation of the argument ssid leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Élevée CVSS 8.8 CVE-2026-14722A vulnerability was found in tiddly-gittly TidGi-Desktop up to 0.13.0. This impacts an unknown function of the file src/services/wiki/wikiWorker/loadWikiTiddlersWithSubWikis.ts of the component Git Repository Import. The manipulation results in code injection. The attack may be performed from remote. The exploit has been made public and could be used. Élevée CVSS 7.3 CVE-2026-14732A security vulnerability has been detected in SourceCodester Class and Exam Timetabling System 1.0. This vulnerability affects unknown code of the file /edit_exam.php. The manipulation of the argument ID leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. Élevée CVSS 7.3 4101–4200 / 5155 CVE