cve
Veille des vulnérabilités Archive complète
identifiantvulnérabilitésévéritépublié
CVE-2026-64091In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: fix TOCTOU race for reported vlans
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the number of VLANs which need to be stored. Simply because a
VLAN might now suddenly have at least one entry when it had none in the
pre-alloc check - and then needs to occupy space which was not allocated.
It is better to overestimate the buffer size at the beginning and then fill
the buffer only with the VLANs which are not empty.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64093In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already goneAnalyse NVD en cours Élevée CVSS 8.8 CVE-2026-64095In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid double decrement of bla.num_requests
The bla.num_requests is increased when no request_sent was in progress. And
it is decremented in various places (announcement was received, backbone is
purged, periodic work). But the check if the request_sent is actually set
to a specific state and the atomic_dec/_inc are not safe because they are
not atomic (TOCTOU) and multiple such code portions can run concurrently.
At the same time, it is necessary to modify request_sent (state) and
bla.num_requests atomically. Otherwise batadv_bla_send_request() might set
request_sent to 1 and is interrupted. batadv_handle_announce() can then
set request_sent back to 0 and decrement num_requests before
batadv_bla_send_request() incremented it.
The two operations must therefore be locked. And since state (request_sent)
and wait_periods are only accessed inside this lock, they can be converted
to simpler datatypes. And to avoid that the bla.num_requests is touched by
a parallel running context with a valid backbone_gw reference after
batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to
correctly signal that a backbone_gw is in the state of being cleaned up.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64096In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: fix use-after-free in orig_node RCU release
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge time have drained before the orig_node memory is reclaimed.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64097In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate GPIO pin LUT table size before iterating
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3)Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64098In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use uninterruptible resv lock for plane updates
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64099In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix use-after-free of CPU job query arrays on error path
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64102In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64104In the Linux kernel, the following vulnerability has been resolved:
virt: sev-guest: Explicitly leak pages in unknown state
When set_memory_{encrypted,decrypted}() fail, the user cannot know at which
point the function failed, meaning that the pages are left in an unknown state
from the point of view of the caller.
Since the pages may be left in an unencrypted state, they are not suitable for
general use, and cannot be returned safely to the buddy allocator. Avoid the
issue by never freeing the pages, and then do the proper accounting by calling
snp_leak_pages().Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-64106In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits
Userspace can restore an ITS Device Table Entry whose Size field encodes
more EventID bits than the virtual ITS supports. The live MAPD path
rejects that state, but vgic_its_restore_dte() accepts it and stores the
out-of-range value in dev->num_eventid_bits.
Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before
allocating the device. This mirrors the MAPD check and prevents the
restored state from reaching vgic_its_restore_itt(), where the unchecked
value can be converted into an oversized scan_its_table() range.Analyse NVD en cours Critique CVSS 9 CVE-2026-64108In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix busy dentry used after unmounting
Since commit 340cea84f691c ("cifs: open files should not hold ref on
superblock"), cifs file only holds the dentry ref_cnt, the cifs file
close work(cfile->deferred) could be executed after unmounting, which
will trigger a warning in generic_shutdown_super:
BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of
cifs cifs]
The detailed processs is:
process A process B kworker
fd = open(PATH)
vfs_open
file->__f_path = *path // dentry->d_lockref.count = 1
cifs_open
cifs_new_fileinfo
cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2
close(fd)
__fput
cifs_close
queue_delayed_work(deferredclose_wq, cfile->deferred)
dput(dentry) // dentry->d_lockref.count = 1
smb2_deferred_work_close
_cifsFileInfo_put
list_del(&cifs_file->flist)
umount
cleanup_mnt
deactivate_super
cifs_kill_sb
cifs_close_all_deferred_files_sb
cifs_close_all_deferred_files
// cannot find cfile, skip _cifsFileInfo_put
kill_anon_super
generic_shutdown_super
shrink_dcache_for_umount
umount_check
WARN ! // dentry->d_lockref.count = 1
cifsFileInfo_put_final
dput(cifs_file->dentry)
// dentry->d_lockref.count = 0
Fix it by flushing 'deferredclose_wq' before calling kill_anon_super.
Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64109In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c62486e ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64111In the Linux kernel, the following vulnerability has been resolved:
lsm: hold cred_guard_mutex for lsm_set_self_attr()
Just as proc_pid_attr_write() already does before calling the LSM
hook. This only matters for SELinux and AppArmor which check
whether the process is being ptraced and if so, whether to
allow the transition.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64112In the Linux kernel, the following vulnerability has been resolved:
rbd: eliminate a race in lock_dwork draining on unmap
Given how rbd_lock_add_request() and rbd_img_exclusive_lock() are
written, lock_dwork may be (re)queued more than it's actually needed:
for example in case a new I/O request comes in while we are in the
middle of rbd_acquire_lock() on behalf of another I/O request. This is
expected and with rbd_release_lock() preemptively canceling lock_dwork
is benign under normal operation.
A more problematic example is maybe_kick_acquire():
if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) {
dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev);
mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0);
}
It's not unrealistic for lock_dwork to get canceled right after
delayed_work_pending() returns true and for mod_delayed_work() to
requeue it right there anyway. This is a classic TOCTOU race.
When it comes to unmapping the image, there is an implicit assumption
of no self-initiated exclusive lock activity past the point of return
from rbd_dev_image_unlock() which unlocks the lock if it happens to be
held. This unlock is assumed to be final and lock_dwork (as well as
all other exclusive lock tasks, really) isn't expected to get queued
again. However, lock_dwork is canceled only in cancel_tasks_sync()
(i.e. later in the unmap sequence) and on top of that the cancellation
can get in effect nullified by maybe_kick_acquire(). This may result
in rbd_acquire_lock() executing after rbd_dev_device_release() and
rbd_dev_image_release() run and free and/or reset a bunch of things.
One of the possible failure modes then is a violated
rbd_assert(rbd_image_format_valid(rbd_dev->image_format));
in rbd_dev_header_info() which is called via rbd_dev_refresh() from
rbd_post_acquire_action().
Redo exclusive lock task draining to provide saner semantics and try
to meet the assumptions around rbd_dev_image_unlock().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64113In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64114In the Linux kernel, the following vulnerability has been resolved:
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64115In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix UAF when peer resets connection during handshake
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64116In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64117In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64118In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-64122In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Call Trace:
mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
devlink_health_reporter_recover+0xa2/0x150
devlink_health_report+0x254/0x7c0
mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core]
mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core]
process_one_work+0x677/0xf20
worker_thread+0x51f/0xd90
kthread+0x3a5/0x810
ret_from_fork+0x208/0x400
ret_from_fork_asm+0x1a/0x30Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64123In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64124In the Linux kernel, the following vulnerability has been resolved:
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64125In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: keep RBUF EEE/PM disabled
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64126In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.Analyse NVD en cours Élevée CVSS 7.3 CVE-2026-64132In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: refresh hdr pointer before ioam6_event()
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64133In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64134In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Don't setup bogus iov_iter for silencing
At transition to the iov_iter for PCM data transfer, we blindly
applied the iov_iter setup also for silencing (i.e. data = NULL), and
it leads to a calculation of bogus iov_iter. Fortunately this didn't
cause troubles on most of architectures but it goes wrong on RISC-V
now, causing a NULL dereference.
Handle the NULL data case to treat the silencing in interleaved_copy()
for addressing the bug above. noninterleaved_copy() has already the
NULL data handling, so it doesn't need changes.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64136In the Linux kernel, the following vulnerability has been resolved:
smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked()
Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields")
refactored cifs code to change cifs_tcp_ses_lock for tc_lock around
tc_count changes.
There was missing lock around tc_count increment inside
smb2_find_smb_sess_tcon_unlocked().Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64137In the Linux kernel, the following vulnerability has been resolved:
smb: client: require net admin for CIFS SWN netlink
CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The
intended sender is the cifs.witness helper, but the generic-netlink
operation currently has no capability flag, so any local process can send
RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness
handler.
The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group
capability flags. Register messages sent to that group include the witness
registration id and, for NTLM-authenticated mounts, the username, domain,
and password attributes copied from the CIFS session. An unprivileged
local process should not be able to join that group and receive those
messages.
Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with
GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for
joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The
cifs.witness service runs with the privileges needed for both operations.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64138In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate SID in parent security descriptor during ACL inheritance
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory.Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64140In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64141In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64142In the Linux kernel, the following vulnerability has been resolved:
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd_durable_scavenger() has two related races against any walker
that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode()
(used by ksmbd_vfs_rename) and the share-mode checks in
fs/smb/server/smb_common.c.
(1) fp->node list-head reuse. Durable-preserved handles can remain
linked on f_ci->m_fp_list after session teardown so share-mode checks
still see them while the handle is reconnectable. The scavenger
collected expired handles by adding fp->node to a local
scavenger_list after removing them from the global durable idr.
Because fp->node is the same list_head used by m_fp_list,
list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links
and corrupts both lists. CONFIG_DEBUG_LIST can report this on the
share-mode walk path.
(2) Refcount race against m_fp_list walkers. The scavenger qualifies
an expired durable handle with atomic_read(&fp->refcount) > 1 and
fp->conn under global_ft.lock, removes fp from global_ft, then drops
global_ft.lock before unlinking fp from m_fp_list and freeing it.
During that gap fp is still linked on m_fp_list with f_state ==
FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls
ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and
takes a live reference; the scavenger then unlinks and frees fp
while the holder owns a reference, leading to UAF on the holder's
subsequent ksmbd_fd_put() and on any field reads performed by a
concurrent share-mode walker that iterates m_fp_list without taking
ksmbd_fp_get() (smb_check_perm_dleases-like paths).
Fix both:
* Stop reusing fp->node as a scavenger-private list node. Remove
one expired handle from global_ft under global_ft.lock, take an
explicit transient reference, drop the lock, unlink fp->node
from m_fp_list under f_ci->m_lock, then drop both the durable
lifetime and transient references with atomic_sub_and_test(2,
&fp->refcount). If the scavenger is the last putter the close
runs there; otherwise an in-flight holder that already raced
through the m_fp_list lookup owns the final close via its
ksmbd_fd_put() path. The one-at-a-time disposal can rescan the
durable idr when multiple handles expire in the same pass, but
durable scavenging is a background expiration path and the final
full scan recomputes min_timeout before the next wait.
* Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right
after idr_remove(), so a delayed final close from a holder that
snatched fp does not re-issue idr_remove() on a persistent id
that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have
already handed out to a brand-new durable handle.
* Bypass the per-conn open_files_count decrement in
__put_fd_final() when fp is detached from any session table
(fp->conn cleared by session_fd_check() at durable preserve --
paired with the volatile_id clear at unpublish, so checking
fp->conn alone is sufficient). The walker that owns the final
close runs from an unrelated work->conn whose
stats.open_files_count never tracked this durable fp; without
this guard the holder would underflow that unrelated counter.
The two races are folded into one patch because patch (1) alone
cleans up the corrupted list but leaves a deterministic UAF window
for m_fp_list walkers that the transient-reference and
persistent_id discipline in (2) close; bisecting onto an
intermediate state would land on a UAF that pre-patch chaos merely
made less reproducible.
Validation:
* CONFIG_DEBUG_LIST coverage for the list_head reuse path.
* KASAN-enabled direct SMB2 durable-handle coverage that exercised
ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode()
returns while durable handles expired under concurrent rename
lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING
reports.
---truncated---Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64148In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix error handling in pdsc_devcmd_wait
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64150In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: release local_lock before re-enabling softirqs
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh().Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64151In the Linux kernel, the following vulnerability has been resolved:
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path.Analyse NVD en cours Élevée CVSS 8.4 CVE-2026-64152In the Linux kernel, the following vulnerability has been resolved:
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map.Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-64153In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Patchwork: https://patchwork.freedesktop.org/patch/719685/Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64158In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix write streaming disablement if fd open O_RDWR
In netfs_perform_write(), "write streaming" (the caching of dirty data in
dirty but !uptodate folios) is performed to avoid the need to read data
that is just going to get immediately overwritten. However, this is/will
be disabled in three circumstances: if the fd is open O_RDWR, if fscache is
in use (as we need to round out the blocks for DIO) or if content
encryption is enabled (again for rounding out purposes).
The idea behind disabling it if the fd is open O_RDWR is that we'd need to
flush the write-streaming page before we could read the data, particularly
through mmap. But netfs now fills in the gaps if ->read_folio() is called
on the page, so that is unnecessary. Further, this doesn't actually work
if a separate fd is open for reading.
Fix this by removing the check for O_RDWR, thereby allowing streaming
writes even when we might read.
This caused a number of problems with the generic/522 xfstest, but those
are now fixed.Analyse NVD en cours Élevée CVSS 7.3 CVE-2026-64160In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64162In the Linux kernel, the following vulnerability has been resolved:
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.Analyse NVD en cours Critique CVSS 9.8 CVE-2026-64172In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-64175In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: stop TX during firmware restart
When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel
BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart
to true. However, iwl_mld_tx_from_txq() does not check this flag before
dequeuing frames from mac80211 and pushing them to the transport layer.
Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame,
which then gets freed immediately. Under high-throughput conditions
(e.g., Tailscale UDP traffic or active SSH sessions), this creates a
tight dequeue-send-fail-free loop that wastes CPU cycles and generates
rapid skb allocation churn, leading to memory pressure from slab
fragmentation.
The RX path already has this guard (iwl_mld_rx_mpdu checks
in_hw_restart at rx.c:1906), and so does the TXQ allocation worker
(iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to
iwl_mld_tx_from_txq() to stop all TX during firmware restart.
Frames left in mac80211's TXQs are naturally drained after restart
completes, when queue reallocation triggers iwl_mld_tx_from_txq()
via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes
wake_tx_queue.
Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on
kernel 6.19.5 where the firmware crashes approximately every 10-15
minutes under Tailscale traffic.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-64176In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-64178In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-64181In the Linux kernel, the following vulnerability has been resolved:
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a
"WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the
VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by
"BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when
reclaim gets to call shrink_huge_zero_folio_scan().
It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and
indeed, whereas pte_special() and pte_mkspecial() are subject to a
dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial()
are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on
any 32-bit architecture.
While the problem was exposed through commit d80a9cb1a64a
("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an
oversight in commit af38538801c6 ("mm/memory: factor out common code from
vm_normal_page_*()") and would result in other problems:
* huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and
numamaps as file-backed THP
* folio_walk_start() returning the folio even without FW_ZEROPAGE set.
Callers seem to tolerate that, though.
... and triggering the VM_WARN_ON_ONE(), although never reported so far.
To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider
whether pmd_special/pud_special is actually implemented.Analyse NVD en cours Élevée CVSS 7.8 CVE-2023-54366SurrealDB before 1.0.1 sets default table permissions to FULL instead of NONE, allowing SELECT, CREATE, UPDATE, and DELETE operations on tables without explicit permissions. Attackers with database access or unauthenticated users on publicly exposed instances can perform unrestricted operations on unprotected tables within their authorization scope.Analyse NVD en cours Élevée CVSS 8.8 CVE-2024-58362SurrealDB before 1.5.5 (and 2.0.0-beta before 2.0.0-beta.3) accepts an arbitrary object in the signin and signup operations of the RPC API without recursively validating it for non-computed values. When a record access method defines a SIGNIN or SIGNUP query and the RPC API is exposed to untrusted users, an unauthenticated attacker can encode a binary object containing a subquery using the bincode serialization format and supply it in place of credentials. The subquery is then executed within the database owner's SIGNIN/SIGNUP query under a system user session with the editor role, allowing the attacker to select, create, update, and delete non-IAM resources (though not view the query results directly, and not affect IAM resources, which require the owner role).Analyse NVD en cours Élevée CVSS 8.8 CVE-2024-58366SurrealDB before 1.1.1 contains a format string vulnerability in the rquickjs Exception::throw_type function when scripting is enabled. Attackers with scripting privileges can supply format string sequences in error inputs to read arbitrary memory or execute code with SurrealDB process privileges.Analyse NVD en cours Élevée CVSS 8.5 CVE-2024-58367SurrealDB versions before 2.0.4 fail to properly enforce field permissions during SELECT, UPDATE, and DELETE operations, allowing authorized users to access unauthorized field values through various query techniques. Attackers can exploit SELECT VALUE operations, field aliasing, function arguments, WHERE clause filtering, RETURN BEFORE clauses, and SET clause references to leak protected field contents despite lacking SELECT permissions.Analyse NVD en cours Élevée CVSS 7.1 CVE-2024-58368SurrealDB versions before 1.1.0 fail to properly parse the ID, DB, and NS headers in HTTP REST API requests containing special characters. Unauthenticated attackers can send crafted HTTP requests with malformed header values to trigger an uncaught exception that crashes the server.Analyse NVD en cours Élevée CVSS 7.5 CVE-2025-71391SurrealDB versions before 2.2.2 contain an uncaught exception vulnerability in the net module that allows authenticated users to crash the database. Attackers can send crafted HTTP queries containing null bytes to the /sql endpoint, causing an unhandled exception that crashes the SurrealDB instance and any dependent applications.Analyse NVD en cours Élevée CVSS 7.1 CVE-2025-71392SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 fails to properly escape table and field names in the command-line export command. An authenticated System User with OWNER or EDITOR roles can create tables or fields with malicious names containing SurrealQL. When a higher-privileged user subsequently imports the exported backup, the injected SurrealQL executes, enabling privilege escalation and root-level takeover of the SurrealDB instance. Applications that let users define custom tables or fields are also exposed to a universal second-order SurrealQL injection even when query parameters are sanitized.Analyse NVD en cours Critique CVSS 9.4 CVE-2025-71395SurrealDB versions before 2.2.2 contain a memory exhaustion vulnerability in the string::replace function that fails to restrict resulting string length when using regex patterns. An authenticated attacker can craft a malicious query to exhaust server memory through unbounded string allocations, causing denial of service.Analyse NVD en cours Élevée CVSS 7.1 CVE-2025-71397SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted.Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-10130QueryWeaver contains an authentication bypass vulnerability that allows unauthenticated attackers to obtain valid session tokens for existing accounts by submitting a signup request with a known victim email address. The signup route unconditionally creates and links a new token to the matching Identity via a Cypher MERGE operation before checking whether the email belongs to an existing account, causing the server to return a valid authenticated session token for the victim's identity without requiring any prior credentials or user interaction. Élevée CVSS 8.2 CVE-2026-11826OpenPLC_v3 contains a heap-based buffer overflow in the getData() function in webserver/core/modbus_master.cpp. getData() reads characters between two delimiters into a caller-supplied buffer with no size parameter and no bounds check. In parseConfig() the function is invoked with the 100-byte heap-allocated MB_device.dev_name field. An authenticated attacker with access to the OpenPLC web interface can send a crafted HTTP POST to the /modbus endpoint with an oversized device_name value; the value is persisted to mbconfig.cfg and parsed on load, overflowing dev_name and overwriting adjacent struct fields (protocol at offset 108, dev_address at offset 109, ip_port at offset 210). A 200-byte payload writes 100 bytes past the allocation. The result is heap corruption leading to runtime crash and denial of service of the PLC process control loop, with attacker-controlled overwrite of adjacent configuration fields. The upstream repository was archived on 2026-04-04 and no fix is expected; the vendor has confirmed the issue does not affect OpenPLC Runtime v4. Élevée CVSS 8.8 CVE-2026-12228A stored cross-site scripting (XSS) vulnerability exists in the `POST /api/prompts/share` endpoint of parisneo/lollms (latest version). The endpoint stores attacker-controlled `prompt_content` into `DBDirectMessage.content` without server-side sanitization. When a victim opens the direct message (DM) thread, the message is rendered by the DM UI through `MessageContentRenderer`, which uses `v-html` to insert rendered HTML into the DOM. The frontend sanitizer, which is regex-based, fails to comprehensively sanitize attacker-controlled HTML, allowing malicious payloads to execute in the victim's browser context. This vulnerability enables any authenticated user to send a malicious prompt-share message to another user's inbox, leading to arbitrary JavaScript execution, authenticated actions as the victim, exposure of same-origin application data, and potential account takeover.Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-15631Impact: @fastify/http-proxy versions from 9.4.0 up to and including 11.5.0 fail to validate the resolved WebSocket destination path against the configured rewrite prefix. The WebSocket routing path in WebSocketProxy.findUpstream resolves the destination via the WHATWG URL constructor, which collapses dot segments, so a crafted upgrade request with path traversal sequences can escape the rewrite prefix and reach upstream endpoints that were not meant to be exposed by the proxy. This is a variant of CVE-2021-21322 in a code path that never went through the HTTP fix in fastify/reply-from. Exploitation requires a non-normalizing WebSocket client, since browsers and the ws package normalize the request path before sending, but raw HTTP clients or downstream proxies that forward the request target unchanged make the attack reachable in production topologies.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-16084A weakness has been identified in Sipeed PicoClaw up to 0.2.9. This impacts the function web_fetch of the file pkg/tools/integration/web.go. This manipulation causes server-side request forgery. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Patch name: c15aac21fe05ee103a470e1104bc891754e83392. To fix this issue, it is recommended to deploy a patch. Élevée CVSS 7.3 CVE-2026-16095A flaw has been found in Shibby Tomato 1.28 RT-N5x MIPSR2 Build 124. Affected by this issue is the function setup_conntrack of the file /sbin/rc. Executing a manipulation of the argument ct_tcp_timeout can lead to out-of-bounds write. The attack may be performed from remote. This project is superseded by FreshTomato. Élevée CVSS 8.8 CVE-2026-16096A vulnerability has been found in Shibby Tomato 1.28 RT-N5x MIPSR2 Build 124. This affects the function sub_40BB50 of the file /proc/webmon_recent_domains. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. This project is superseded by FreshTomato. Élevée CVSS 8.8 CVE-2026-16097A vulnerability was found in Shibby Tomato 1.28. This vulnerability affects the function sub_42537C of the component Scheduler Name Handler. The manipulation of the argument a1 results in stack-based buffer overflow. It is possible to launch the attack remotely. This project is superseded by FreshTomato. Élevée CVSS 8.8 CVE-2026-16117Impact: @fastify/http-proxy versions up to and including 11.5.0 fail to rewrite the request prefix when the prefix segment is URL-encoded. Fastify's router URL-decodes paths for route matching, but request.url retains the original encoded form, and the prefix-rewrite step uses a literal string replace against the decoded prefix. A request that encodes one or more characters of the configured prefix therefore matches the route but skips the rewrite, so the raw encoded path is forwarded to the upstream unchanged. The upstream then decodes the path and serves it, letting an attacker reach upstream paths that the proxy was configured to hide via rewritePrefix, including internal or administrative endpoints.
Patches: upgrade to @fastify/http-proxy 11.6.0.
Workarounds: none.Analyse NVD en cours Critique CVSS 10 CVE-2026-16125A vulnerability was found in zevorn rt-claw up to 0.2.0. The affected element is the function claw_net_get/claw_net_post of the file claw/services/tools/net.c of the component http_request. The manipulation of the argument url results in server-side request forgery. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. Élevée CVSS 7.3 CVE-2026-16126A vulnerability was determined in zevorn rt-claw up to 0.2.0. The impacted element is the function handle_rpc_request of the file claw/services/swarm/swarm.c of the component Swarm RPC Receiver. This manipulation causes incorrect authorization. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. Élevée CVSS 7.3 CVE-2026-16127A vulnerability was identified in zevorn rt-claw up to 0.2.0. This affects the function claw_net_get/claw_net_post of the file claw/tools/tool_net.c of the component http_request. Such manipulation of the argument url leads to server-side request forgery. The attack may be performed from remote. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. Élevée CVSS 7.3 CVE-2026-16128A security flaw has been discovered in zevorn rt-claw up to 0.2.0. This impacts the function receiver_thread of the file claw/services/swarm/swarm.c of the component http_request. Performing a manipulation results in server-side request forgery. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. Élevée CVSS 7.3 CVE-2026-16152A vulnerability was found in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_rooma.php. Performing a manipulation of the argument ID results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Élevée CVSS 7.3 CVE-2026-16154A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0/1.php. Affected by this vulnerability is an unknown functionality of the file /edit_room1.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Élevée CVSS 7.3 CVE-2026-16158Impact: @fastify/reply-from versions from 8.3.1 up to but not including 12.6.4 build the internal URL cache key by concatenating the destination and source path without a delimiter. Different destination and source pairs can therefore produce the same key while resolving to different upstream URLs. When getUpstream selects an upstream from request data, a URL cached for one upstream can be reused for a request intended for another upstream, causing cross-upstream data access and modification. The default configuration is affected. Setting disableCache to true prevents the behavior. Patches: upgrade to @fastify/reply-from 12.6.4. Workarounds: pass disableCache: true when registering the plugin.Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-47865VMware Avi Load Balancer contains an authentication bypass vulnerability. A malicious user with network access may be able to access the Avi Control plane by bypassing the authentication mechanism.
Affected versions:
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Critique CVSS 9.8 CVE-2026-47866VMware Avi Load Balancer contains an authorization bypass vulnerability. A malicious actor on the network can access a limited subset of the Avi Control Plane without proper authorization.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 8.3 CVE-2026-47867VMware Avi Load Balancer contains a remote code execution vulnerability. A malicious user with network access may be able to access the Avi Control plane and execute code remotely.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-47868VMware Avi Load Balancer contains a local privilege escalation vulnerability. A malicious user with local access may be able to escalate their privileges to run code as root.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 7.8 CVE-2026-47869VMware Avi Load Balancer contains a remote code execution vulnerability. A malicious authenticated user with network access may be able to inject and execute code.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 8.7 CVE-2026-47870VMware Avi Load Balancer contains a privilege escalation vulnerability. A malicious authenticated user with network access may be able to execute remote code.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 7.1 CVE-2026-47871VMware Avi Load Balancer contains a directory traversal vulnerability. Flaws in file path validation allow malicious, authenticated network users to perform directory traversal attacks.
Affected versions:
32.1.1 (fixed in 32.1.2)
31.1.1 through 31.2.2 (fixed in 31.2.2-2p3)
30.1.1 through 30.2.6 (fixed in 30.2.7)
22.1.1 through 22.1.7 (fixed in 30.2.7)Analyse NVD en cours Élevée CVSS 8.8 CVE-2026-53994ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated remote denial of service. Depending on heap layout and adjacent allocations, heap metadata corruption and further consequences beyond denial of service may be possible, though only denial of service is demonstrated by the supplied proof of concept.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-59173Uncontrolled Resource Consumption vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 9.0.0 through 9.1.13, from 10.0.0 through 10.1.2.
Users are recommended to upgrade to version 9.1.14 or 10.1.3, which fixes the issue.Analyse NVD en cours Élevée CVSS 7.5 CVE-2026-9147uproot dynamically generates Python class source code from ROOT TStreamerInfo records in a file and compiles it at runtime. Some file-controlled streamer metadata fields (for example, streamer element names) are interpolated into the generated Python source without safe quoting via repr() or the !r format specifier. An attacker who can supply a crafted ROOT file can place Python expression-breaking content into a streamer metadata field. When uproot generates and invokes the corresponding reader method, the injected Python expression is evaluated in the context of the process opening the file, resulting in arbitrary Python code execution in applications that open or process attacker-controlled ROOT files with affected uproot code paths. Élevée CVSS 7.8 CVE-2026-9323The urwid web display backend (urwid/display/web.py) generates web session identifiers (urwid_id) in Screen.start() by concatenating two random.randrange(10**9) calls that use Python's Mersenne Twister PRNG, which is not cryptographically secure. Each call consumes approximately 30 bits of PRNG state, and the Mersenne Twister internal state is approximately 19,937 bits, so an attacker who observes approximately 334 session IDs (for example via the X-Urwid-ID HTTP response header) can fully reconstruct the internal state and predict all past and future session IDs (Path B). The same identifier is also used as the filename of a FIFO created in the world-listable /tmp directory (for example /tmp/urwid375487765176907690.in), so any local user on the host can list /tmp to enumerate active session tokens directly (Path A). With a valid session ID, an attacker can read the victim's terminal screen via the polling endpoint, inject keystrokes into the victim's session (yielding OS-level code execution with the session owner's privileges if the session runs a shell), and inject exit sequences or flood the FIFO to terminate or crash the session. A prior Bandit S311 warning on this usage was suppressed with # noqa: S311 rather than fixed Élevée CVSS 8.1 CVE-2019-25764**UNSUPPORTED WHEN ASSIGNED** Exposed IOCTL with Insufficient Access Control in the ASUS AURA SYNC driver allows a local user to bypass the driver's verification and invoke arbitrary IOCTLs, resulting in privilege escalation.
Refer to the 'End-of-Life Notice and Driver Update for Legacy ASUS Drivers ' section on the ASUS Security Advisory for more information. Élevée CVSS 7.3 CVE-2024-23564HCL Aftermarket EPC is affected by Business Logic Vulnerability using which a non valid user of the application can obtain passwords from the server and redirect them to their own email address by manipulating the server's response. The application includes checks in the initial requests to verify the validity of the provided UserId, but similar validation is not applied to Email requests when sending passwords to user emails. Critique CVSS 9.1 CVE-2025-51677An issue was discovered in openRISC OR1200 commit 83ac6b. An output mismatch between the RTL and the netlist of the or1200 cpu output port can lead to unexpected behavior. Critique CVSS 9.1 CVE-2025-51678An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. Élevée CVSS 7.5 CVE-2025-60357AhnLab EPP Management v1.0.14.32-6249 was discovered to contain a NoSQL injection vulnerability via the eventlog/agentEvent/list endpoint.Analyse NVD en cours Élevée CVSS 8.1 CVE-2026-11575The PhonePe Payment Solutions WordPress plugin before 3.1.0 does not properly verify the authenticity of incoming payment callbacks: the secret used to validate the callback signature is empty on sites configured through the current setup flow, so the expected signature reduces to an unkeyed hash of the request body that anyone can compute. This allows unauthenticated attackers to forge a payment-success notification and mark unpaid WooCommerce orders as paid without any payment being made. Élevée CVSS 7.5 CVE-2026-11961The User Registration & Membership WordPress plugin before 5.2.3 does not validate that the membership tier submitted during public registration is one of the tiers allowed by the registration form before assigning that tier's associated user role, allowing unauthenticated users to register into an arbitrary published membership tier and obtain its role — up to administrator when such a tier exists. Élevée CVSS 8.1 CVE-2026-12691Missing authentication for critical function vulnerability in Vimesoft Inc. Enterprise Video Platform allows Authentication Bypass.
This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0. Élevée CVSS 7.5 CVE-2026-12692Unverified password change vulnerability in Vimesoft Inc. Enterprise Video Platform allows Authentication Bypass.
This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0. Critique CVSS 9.8 CVE-2026-12693Authorization bypass through User-Controlled key vulnerability in Vimesoft Inc. Enterprise Video Platform allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0. Critique CVSS 9.4 CVE-2026-12694Missing Authorization vulnerability in Vimesoft Inc. Enterprise Video Platform allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0. Critique CVSS 9.1 CVE-2026-12715Missing Authorization in Google Cloud Firebase Studio versions prior to 2026-04-15 on Google Cloud Platform allows an attacker to download other users' deployed source code and access sensitive data via unauthorized GCS URL signing requests.
This vulnerability was patched on 15 April 2026, and no customer action is needed.Analyse NVD en cours Élevée CVSS 8.5 CVE-2026-13352The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – ProfilePress plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 4.16.18 via the allowed_mime_types function. This is due to the unconditional registration of an upload_mimes filter that adds executable file extensions (.exe, .apk, .msi) to the global WordPress MIME allowlist, without scoping the expansion to digital-product upload contexts. This makes it possible for authenticated attackers, with author-level access and above, to upload files that may be executable, which makes remote code execution possible. This filter is registered globally on every request regardless of whether the digital products feature is configured or in use, meaning the expanded MIME allowlist affects all WordPress upload contexts site-wide. Élevée CVSS 8.8 CVE-2026-13410Dancer::Plugin::Auth::Google versions through 0.07 for Perl have TLS verification disabled.
The default user agent is initialised with SSL_verify_mode explicitly disabled.
An attacker with network man-in-the-middle (MITM) capability between the Dancer application and googleapis.com can intercept the OAuth2 token exchange and userinfo fetch, return a forged access_token and user profile, and be logged in to the Dancer application as any Google user. Élevée CVSS 8.2 CVE-2026-13445IBM Langflow OSS 1.0.0 through 1.10.1 can allow an authenticated attacker to exploit the SaveToFile component to read and modify another user's uploaded files by specifying absolute paths pointing to victim storage locations. In append mode, the attacker's workflow reads victim file contents, appends attacker-controlled data, and uploads a copy containing victim data to the attacker's namespace (confidentiality breach). In overwrite mode, the attacker can replace victim file contents with arbitrary data (integrity breach). This breaks the storage ownership boundary between users.Langflow Élevée CVSS 8.1 CVE-2026-13446IBM Langflow OSS 1.0.0 through 1.10.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.Langflow Critique CVSS 9.8 CVE-2026-13448IBM Langflow OSS 1.0.0 through 1.10.1 Lanflow OSS contains an unauthenticated remote code execution vulnerability in the public flow build endpoint ( /api/v1/build_public_tmp/{flow_id}/flow ). The vulnerability stems from an incomplete denylist in the validate_public_flow_no_code_execution() function that fails to block several code-execution agent components including OpenDsStarAgent, CodeActAgentSmolagents, and CSVAgent.Langflow Critique CVSS 9.8 2001–2100 / 5155 CVE