cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-15964The Single Sign On For TNG plugin for WordPress is vulnerable to Authentication Bypass via unauthenticated password reset in all versions up to, and including, 2.0.0. This is due to the `ssoprocess_ajax()` function — registered on `wp_ajax_nopriv_ssoprocess_ajax` and therefore reachable without authentication — accepting an attacker-supplied `email` parameter with the `setnewpassword` operation and calling `reset_password()` on the resolved account without any ownership token, email confirmation link, or capability check. The sole guard is a call to `check_ajax_referer()`, which provides no authorization barrier because the `ssoajaxnonce` nonce is publicly broadcast on every front-end page via `wp_localize_script()` into the `SSOPWDREQUIREMENT` JavaScript object; since WordPress computes nonces for logged-out visitors against a shared anonymous session context, any unauthenticated visitor can scrape a valid nonce from the homepage and use it to authenticate the request. This makes it possible for unauthenticated attackers to change the password of any WordPress account, including administrator accounts, enabling complete site takeover. Critical CVSS 9.8 CVE-2026-15988The AI Engine – The Chatbot, AI Framework & MCP for WordPress plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.6.5 This is due to missing or incorrect nonce validation on the reauth_for_authorize function. This makes it possible for unauthenticated attackers to create new administrator accounts with attacker-supplied credentials via a CSRF-based REST authentication bypass, granted they can trick a site administrator into performing an action such as clicking on a link. This bypass can be combined with WordPress's ?_method=POST method-override support to convert a top-navigation GET request into an authenticated POST to the REST users endpoint, requiring no existing account on the attacker's part. High CVSS 8.8 CVE-2026-16144The Kali Forms — Contact Form & Drag-and-Drop Builder plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.4.20 via the _save_data function. This is due to insufficient validation of the 'thisPermalink' field value before it overwrites a trusted callable placeholder, allowing attacker-controlled strings to reach call_user_func() in _save_data(). This makes it possible for unauthenticated attackers to execute code on the server. Exploitation requires the target form to define a field with a name matching one of the reserved placeholder keys ('thisPermalink', 'entryCounter', or 'submission_link'), as check_if_placeholders_changed() only processes POST keys present in the form's field_type_map. High CVSS 8.1 CVE-2026-16635The Pronamic Pay plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 10.1.0 This is due to the `maybe_update_user_role()` function passing an attacker-controlled Gravity Forms field value (`$lead[$feed->user_role_field_id]`) directly into `WP_User::set_role()` without any allowlist validation, capability comparison, or permission check to constrain which roles can be assigned. This makes it possible for authenticated attackers, with Subscriber-level access and above, to escalate their own WordPress account to Administrator by tampering with the role field value in a form submission. Exploitation requires that an administrator has already configured a Pronamic Pay payment feed in Gravity Forms with the **Update User Role** option enabled and mapped to a form field; once that configuration is in place, no further preconditions exist to prevent an authenticated attacker from exploiting this vulnerability. High CVSS 8.8 CVE-2026-18536Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP.
The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP.
The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string.
Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.Rrwo Data\ High CVSS 7.5 CVE-2026-3141The FormGent plugin for WordPress is vulnerable to unauthorized arbitrary file deletion due to a missing capability check on the /wp-json/formgent/responses/attachments REST API endpoint in all versions up to, and including, 1.9.2 This is due to the REST API route being registered without any authentication middleware in routes/rest/api.php. This makes it possible for unauthenticated attackers to delete arbitrary files within the formgent uploads directory. Additionally, on Linux servers where the wp-content/uploads/formgent directory does not yet exist (the default state after plugin installation), the path traversal protection can be bypassed, enabling deletion of arbitrary files including wp-config.php which can lead to complete site takeover via a fresh WordPress installation. Critical CVSS 9.1 CVE-2026-54894Allocation of Resources Without Limits or Throttling in ueberauth guardian allows denial of service via unbounded atom creation from attacker-influenced binary input.
Guardian.Plug.Keys derives connection and session namespace keys by passing arbitrary binaries to String.to_atom/1. base_key/1 in lib/guardian/plug/keys.ex converts any binary into the atom :"guardian_<input>", and the derived helpers claims_key/1, resource_key/1, and token_key/1 create a second atom on top of that. key_from_other/1 likewise converts a regex-captured binary through String.to_atom/1. The public specs advertise String.t() as a valid argument, so passing a string is documented usage, and higher-level entry points such as Guardian.Plug.current_token(conn, key: key) thread the caller-supplied key straight into these functions.
String.to_atom/1 creates a brand-new atom for every previously unseen binary, atoms are never garbage collected, and the BEAM atom table is fixed at roughly 1,048,576 entries by default. An application that routes attacker-influenced data (a tenant identifier, header, or other request input) into a Guardian key therefore mints one permanent atom per distinct value. A modest stream of varied, unauthenticated input permanently consumes the atom table and crashes the BEAM node, taking down every application running on it.
This issue affects guardian: from 0.1.0 before 2.4.1.Ueberauth Guardian High CVSS 7.5 CVE-2026-55733Allocation of Resources Without Limits or Throttling in ueberauth guardian allows denial of service via unbounded atom creation from attacker-controlled binary input.
Guardian.Permissions.AtomEncoding encodes permission scopes by passing arbitrary binaries to String.to_atom/1. When encode/3 in lib/guardian/permissions/atom_encoding.ex is called with a list, each binary entry is handled by the encode_value/3 binary clause, which calls String.to_atom(value) with no allow-list check. The perm_set argument (the application's small, finite set of legitimate permission names) is discarded, so any external string flows straight into atom creation. This encoder is selected with use Guardian.Permissions, encoding: Guardian.Permissions.AtomEncoding and reached through the imported encode/3 entry point.
String.to_atom/1 creates a brand-new atom for every previously unseen binary, atoms are never garbage collected, and the BEAM atom table is fixed at roughly 1,048,576 entries by default. An application that funnels attacker-influenced permission scopes (from a request body, a JWT claim, or other external input) into encode/3 therefore mints one permanent atom per distinct value. A modest stream of varied, unauthenticated input permanently consumes the atom table and crashes the BEAM node with system_limit, taking down every application running on it.
The default encoder is Guardian.Permissions.BitwiseEncoding, which is not affected.
This issue affects guardian: from 2.0.0 before 2.4.1.Ueberauth Guardian High CVSS 7.5 CVE-2026-55734Allocation of Resources Without Limits or Throttling vulnerability in ueberauth guardian (Guardian.Permissions module) allows a denial of service via BEAM atom-table exhaustion.
This vulnerability is associated with program file lib/guardian/permissions.ex and program routines 'Elixir.Guardian.Permissions':encode_permissions!/1, 'Elixir.Guardian.Permissions':encode_permissions_into_claims!/2, 'Elixir.Guardian.Permissions':do_encode_permissions!/2.
The Guardian.Permissions mixin installs a public encode_permissions!/1 function on every module that does use Guardian.Permissions. For each key of the supplied map, encode_permissions!/1 calls String.to_atom(to_string(k)) before any validation runs. The integer-value clause of do_encode_permissions!/2 then short-circuits straight to encoding without validating the key against the configured permission set, so a key with an integer value is interned as a fresh atom with no exception raised. Atoms are never garbage collected and the BEAM atom table is a fixed-size resource (default roughly 1,048,576 entries), so each unique attacker-chosen key permanently consumes one slot. An attacker who can influence a permission map that reaches encode_permissions!/1 (for example a permissions map read from a request body and passed into token issuance via encode_permissions_into_claims!/2) can mint an unbounded number of atoms and exhaust the atom table, crashing the entire BEAM node and every service running on it. The sibling decode_permissions/1 is not affected because it skips keys absent from the configured permission set.
This issue affects guardian: from 2.0.0 before 2.4.1.Ueberauth Guardian High CVSS 7.5 CVE-2026-55735Improper Verification of Cryptographic Signature in ueberauth guardian allows an unauthenticated attacker to revoke a victim's session with a forged token.
Guardian.revoke/3 in lib/guardian.ex decodes the supplied token with peek/1, which performs no signature verification (it only base64-decodes the JWT header and payload). The resulting unverified claims are forwarded directly to the configured token module's revoke callback and the implementation's on_revoke callback, a state-mutating sink. The sibling operations refresh/2 and exchange/4 both call decode_and_verify first, so the signature is checked before anything acts on the claims; revoke/3 is the only state-mutating path that acts on claims without verifying the signature.
An attacker who knows or guesses a victim's identifying claim values (jti, sub) can forge a JWT carrying those claims, sign it with an arbitrary key, and submit it to any endpoint that funnels a caller-supplied token into Guardian.revoke/3 (the standard logout / session-revocation pattern). When the token module mutates state keyed by the claims (whitelist deletion or blacklist insertion, for example a GuardianDb-style store), the victim's legitimate session is evicted. This is an unauthenticated session-revocation denial of service; the attacker never needs the signing secret.
This issue affects guardian: from 1.0.0 before 2.4.1.Ueberauth Guardian High CVSS 7.5 CVE-2026-66402FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains multiple TLS certificate identity validation weaknesses in tls_verify_certificate(), tls_match_hostname(), and x509_utils_get_dns_names(). Because FreeRDP performs custom Common Name and DNS SAN string matching instead of using OpenSSL's length-aware identity validation APIs, it (1) truncates DNS SAN values at embedded NUL bytes (accepting e.g. 'victim.example\0.attacker.example' as 'victim.example'), (2) accepts a matching Common Name even when non-matching DNS SAN entries are present, and (3) accepts IP-literal targets via DNS/CN matching without comparing iPAddress SANs. Under a trusted or misissued certificate chain, an attacker positioned to present such a certificate can bypass server identity verification, weakening TLS server authentication.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67288FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard cache request decoders that accept NULL NDR pointers for LookupName in SCARD_IOCTL_READCACHEA and SCARD_IOCTL_WRITECACHEA operations. When smartcard emulation is enabled, attackers can send crafted smartcard cache requests with NULL lookup-name pointers to trigger strlen() on a null pointer, causing client process termination.NVD analysis in progress High CVSS 7.5 CVE-2026-67289FreeRDP before 3.29.0 (affected versions <= 3.28.0) does not validate CRLF and control characters in the server-controlled RDP redirection TargetNetAddress field. This value is copied into the client's ServerHostname and, when the client connects through an HTTP proxy, is written directly into the proxy CONNECT request line and Host header by http_proxy_connect() without filtering. A malicious or compromised RDP server can send a crafted redirection PDU containing embedded control characters to inject arbitrary headers/requests into the HTTP proxy CONNECT request.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67290FreeRDP before 3.29.0 contains a heap out-of-bounds read vulnerability in the TSMF FFmpeg decoder when parsing AVC1 MPEG2VIDEOINFO media types with insufficient ExtraData. Attackers can send malformed media format data from a server to trigger a crash by reading fixed offsets without validating source buffer length.NVD analysis in progress High CVSS 7.5 CVE-2026-67291FreeRDP before 3.29.0 (affected versions <= 3.28.0) contains a heap out-of-bounds read in update_process_glyph_fragments()/glyph_cache_fragment_put() in libfreerdp/cache/glyph.c. When handling a GLYPH_FRAGMENT_ADD update, the code reads a one-byte server-controlled declared fragment size but does not verify it fits within the remaining received buffer before allocating and copying that many bytes. A malicious RDP server can send a short fragment with an oversized declared size, causing the client to read beyond the allocated buffer, resulting in an out-of-bounds read and client crash.NVD analysis in progress High CVSS 7.5 CVE-2026-67296FreeRDP before 3.29.0 contains a denial of service vulnerability in the RDPEI server channel handler that fails to validate maximum PDU body length before stream allocation. A malicious RDP client can send a header-only RDPEI message with a large declared body length to force excessive memory allocation on the server.NVD analysis in progress High CVSS 7.5 CVE-2026-67297FreeRDP before 3.29.0 fails to enforce the RESPONSE_SIZE_LIMIT when processing Transfer-Encoding: chunked HTTP responses in http_response_recv_body(). Attackers controlling a malicious RD Gateway endpoint can send oversized chunked response bodies to exhaust client memory resources without triggering the configured size limit.NVD analysis in progress High CVSS 7.5 CVE-2026-67298FreeRDP versions 3.28.0 and earlier contain a heap buffer overflow in the server-side RAIL channel handler (rail_server_handle_messages() in channels/rail/server/rail_main.c). When processing a RAIL PDU header, the code subtracts RAIL_PDU_HEADER_LENGTH from the peer-controlled orderLength field without first verifying orderLength is at least the header length. For orderLength values 0..3 this causes an unsigned integer underflow to a very large size, which bypasses the Stream_EnsureRemainingCapacity() capacity check (due to pointer arithmetic wraparound) and is then passed to WTSVirtualChannelRead(), resulting in an out-of-bounds heap write. A malicious or compromised RDP client can exploit this to corrupt the heap and crash the server. Fixed in FreeRDP 3.29.0.NVD analysis in progress High CVSS 7.5 CVE-2026-67299FreeRDP before 3.29.0 contains a client-side heap use-after-free in the async update message proxy for WINDOW_ICON_ORDER when AsyncUpdate is enabled (e.g. xfreerdp /async-update). In update_message_WindowIcon() a shallow CopyMemory() overwrites a freshly allocated lParam->iconInfo with the parser-owned windowIcon->iconInfo pointer. After the parser callback returns, update_recv_window_info_order() frees window_icon.iconInfo, but the queued async message still retains and later dispatches that stale pointer. A malicious or compromised RDP server sending a crafted RAIL Window Alternate Secondary Order with WINDOW_ORDER_ICON can trigger use-after-free, leading to memory corruption and client crash.NVD analysis in progress High CVSS 7.5 CVE-2026-67300FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash.NVD analysis in progress High CVSS 7.5 CVE-2026-67301FreeRDP before 3.29.0 contains out-of-bounds read vulnerabilities in the async update message proxy for the PolygonSC and PolygonCB primary drawing orders. When AsyncUpdate is enabled (e.g., xfreerdp /async-update), update_message_PolygonSC() and update_message_PolygonCB() allocate a fresh points array but copy point data from the address of the order structure instead of from polygonSC->points / polygonCB->points, resulting in a client-side out-of-bounds read. A malicious or compromised RDP server sending crafted PolygonSC/PolygonCB update orders can trigger memory disclosure or a client crash.NVD analysis in progress High CVSS 7.5 CVE-2026-67304FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails. Attackers can send malformed smartcard IRP requests with non-zero cReaders and truncated reader-state data to crash the process via null pointer access in free_reader_states functions.NVD analysis in progress High CVSS 7.5 CVE-2026-67305FreeRDP Windows client before 3.29.0 contains a heap buffer overflow vulnerability in the clipboard virtual channel when processing CLIPRDR_FILE_CONTENTS_RESPONSE PDUs without validating the server-provided size against the destination buffer. A malicious RDP server can send a response with a data payload significantly larger than requested, causing arbitrary heap memory corruption that may enable remote code execution when a user performs a paste operation.NVD analysis in progress Critical CVSS 9.4 CVE-2026-67308Wazuh workflows before 44bf114 contain a shell injection vulnerability in GitHub Actions that allows attackers to execute arbitrary commands by submitting pull requests with crafted VERSION.json files. Attackers can inject shell metacharacters into environment variables that are directly interpolated into run steps, enabling command execution and exfiltration of secrets including GITHUB_TOKEN and AWS credentials on self-hosted runners.NVD analysis in progress Critical CVSS 9.3 CVE-2026-67309Traefik versions >= v3.7.0 and <= v3.7.7 contain a path traversal vulnerability in the Kubernetes Ingress NGINX provider's RewriteTarget middleware (generated from the nginx.ingress.kubernetes.io/rewrite-target annotation). When an Ingress path uses a regex that captures attacker-controlled text without requiring a path separator (e.g., path /api(.*) with rewrite target /$1), a crafted request such as /api../admin matches the public router, is rewritten to a dot-segment traversal path (/../admin), and is forwarded without post-replacement normalization validation. A backend that normalizes dot segments resolves the path to a protected endpoint (e.g., /admin) reachable only through a separate router secured with BasicAuth, DigestAuth, or ForwardAuth, resulting in route-level authentication bypass. The issue is fixed in v3.7.8.NVD analysis in progress High CVSS 7.8 CVE-2026-67320axios in a Node.js deployment using the HTTP adapter can route requests through an attacker-controlled proxy. axios hardens merged request configuration by creating a null-prototype object, but request interceptors run after the merge; a common immutable interceptor pattern such as {...config} or Object.assign({}, config) converts the hardened config back into a regular object. axios then dispatches that object without re-hardening it, and the Node HTTP adapter reads config.proxy through the prototype chain. If an attacker can pollute Object.prototype.proxy, affected requests can be routed through an attacker-controlled proxy. For plaintext HTTP requests, the proxy can observe Authorization headers, Basic auth from config.auth, method, absolute URL, Host, and request body, and can return its own response. This does not establish browser impact or HTTPS header/body disclosure under normal TLS validation. Affected versions are >=0.31.1 (fixed in 0.33.0) and >=1.15.2 (fixed in 1.18.0).NVD analysis in progress High CVSS 8.3 CVE-2026-67322GitPython before 3.1.52 is vulnerable to environment-variable exfiltration in Repo.clone_from(). The caller-supplied remote URL is passed through Git.polish_url(), which on non-Cygwin platforms calls os.path.expandvars() on the URL before invoking git clone. An attacker who controls the clone URL can embed $NAME or ${NAME} tokens that are expanded to the values of the hosting process's environment variables (e.g., AWS_SECRET_ACCESS_KEY or GITHUB_TOKEN). The resulting URL, now containing the secret, is transmitted over the network to an attacker-controlled host during the clone attempt, disclosing the secret.NVD analysis in progress High CVSS 7.5 CVE-2026-67323GitPython before 3.1.51 fails to guard against dangerous Git options passed as keyword arguments in Repo.archive() and git.ls_remote(), allowing command injection via options such as --exec/--upload-pack (leading to arbitrary command execution). Additionally, Repo.iter_commits() and Repo.blame() do not check for leading-dash revision arguments, so a revision like --output=<path> can cause Git to open and truncate an arbitrary file. Exploitation requires an application that passes attacker-controlled arguments to these methods.NVD analysis in progress High CVSS 8.4 CVE-2026-67324GitPython 3.1.50 fails to recognize joined short-option forms such as -u<value> (the short form of --upload-pack=<value>) when enforcing its default unsafe-option gate. When an application passes attacker-influenced clone options into Repo.clone_from(..., multi_options=..., allow_unsafe_options=False), an attacker can supply -u<helper> to bypass the gate that blocks --upload-pack/-u, causing Git to execute the specified helper command during clone. Fixed in 3.1.51.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67325GitPython before 3.1.51 contains an incomplete command injection blocklist that fails to account for git's long-option prefix abbreviation feature. Attackers can bypass the unsafe options guard by using abbreviated option names like upload_p instead of upload_pack, which git resolves to dangerous options and executes arbitrary commands.NVD analysis in progress High CVSS 8.8 CVE-2026-67326GitPython before 3.1.50 fails to validate newline characters in the section parameter of config_writer(), allowing attackers to inject arbitrary section headers into .git/config. Attackers can inject newlines to create a forged [core] section with hooksPath pointing to attacker-controlled directories, achieving remote code execution when git hooks are triggered.NVD analysis in progress High CVSS 7 CVE-2026-67327better-auth versions >= 1.1.3 and < 1.6.22 (and pre-release versions >= 1.7.0-beta.0 and < 1.7.0-beta.10) are vulnerable to account takeover via pre-account hijacking on magic-link and email-OTP sign-in when open email/password registration is enabled. An attacker registers an account with the victim's email address and an attacker-chosen password; the account remains unverified. When the legitimate owner later signs in via the magic-link or email-OTP passwordless flow, the account is marked verified without removing the pre-existing password or revoking existing sessions, so the attacker's password remains valid, granting persistent access to the victim's account. Fixed in 1.6.22 and 1.7.0-beta.10.NVD analysis in progress High CVSS 8.3 CVE-2026-67328@better-auth/sso versions before 1.6.21 contain multiple authentication bypass vulnerabilities in SSO provider handling that allow attackers to sign in as arbitrary users. Attackers can exploit domain verification parsing mismatches, orphaned provider accounts, unbound SAML assertions, or reflected XSS on logout endpoints to gain unauthorized session access and account takeover.NVD analysis in progress High CVSS 8.1 CVE-2026-67329@better-auth/stripe versions >= 1.4.11 and < 1.6.21, and >= 1.7.0-beta.0 and < 1.7.0-beta.10, contain an authorization bypass in organization subscription actions. The middleware validates the organization ID taken from the request query string against the authorizeReference callback, but the handler reads the organization ID only from the request body and falls back to the caller's active organization from their session. When these differ, an authenticated member of multiple organizations can perform subscription actions (cancel, change plan, restore, billing portal access) against an organization they belong to but should not manage, and can access another organization's billing details including payment methods, invoices, and subscription state.NVD analysis in progress High CVSS 7.1 CVE-2026-67330@better-auth/scim (a better-auth plugin) versions >= 1.4.0-beta.27 through <= 1.6.21 and >= 1.7.0-beta.0 through <= 1.7.0-beta.9 contain an authorization bypass. SCIM token issuance did not reject provider IDs already used by existing SSO, SAML, OIDC, generic OAuth, or social account providers, and the same logical provider ID was used for both SCIM provider configuration and account ownership. An authenticated user could mint a SCIM token whose provider ID collided with an existing provider namespace, causing SCIM user routes to resolve account rows the token never provisioned. This allowed listing, reading, updating (including rewriting global profile/email fields without uniqueness checks), and deleting global user accounts and sessions, resulting in account takeover and unauthorized deprovisioning. Fixed in 1.6.22 and 1.7.0-beta.10 (1.7.0-rc.0).NVD analysis in progress Critical CVSS 9.9 CVE-2026-67331better-auth SCIM versions from 1.5.0 before 1.7.0-beta.4 fail to bind non-organization SCIM providers to their creator by default, allowing authenticated users to manage other users' providers. Attackers can regenerate SCIM bearer tokens, invalidate legitimate tokens, and authenticate to SCIM API routes with the attacker-controlled token.NVD analysis in progress High CVSS 8.3 CVE-2026-67333better-auth before 1.6.13 (and pre-release builds 1.7.0-beta.0 through 1.7.0-beta.3) fail to validate the scheme of redirect_uris registered via the deprecated oidc-provider plugin and the mcp plugin (which wraps the same provider). An attacker can register an OAuth client with a javascript: redirect_uri, which the authorization server later returns unchanged in the consent response. If the deployment's consent page navigates the browser to the returned redirectURI (e.g. assigning it to window.location.href), the attacker's JavaScript executes in the authorization-server origin, exposing the victim's session and enabling account takeover.NVD analysis in progress High CVSS 7.2 CVE-2026-67336better-auth versions before 1.6.11 contain insecure cryptographic defaults in the oidcProvider and mcp plugins that advertise the none algorithm and accept plain PKCE by default. Attackers can exploit algorithm negotiation to accept unsigned tokens or intercept authorization codes when PKCE plain is used instead of the required S256 method.NVD analysis in progress High CVSS 8.7 CVE-2026-67340ArcadeDB before 26.7.2 (arcadedb-engine) allows trigger scripts to look up host classes in java.lang.* (via Java.type) because ScriptTriggerExecutor adds java.lang.* to the allowed packages. An authenticated user with UPDATE_SCHEMA permission can create a JavaScript trigger that invokes java.lang.Runtime.getRuntime().exec() (or ProcessBuilder), achieving OS command execution when the trigger fires.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67341ArcadeDB versions before 26.7.2 fail to enforce scripting authorization checks on the SQL DEFINE FUNCTION statement with LANGUAGE js. Attackers with database access can execute arbitrary JavaScript code by submitting DEFINE FUNCTION statements, bypassing security controls intended to restrict scripting to administrators.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67342ArcadeDB versions before 26.7.2 contain an authorization bypass vulnerability in HTTP handlers for time series, batch, Prometheus, and Grafana endpoints that fail to validate database access permissions. Attackers can access and modify databases they are not authorized to use by directly calling affected endpoints with arbitrary database parameters.NVD analysis in progress Critical CVSS 9.8 CVE-2026-67343ArcadeDB versions before 26.7.2 fail to properly redact the cluster token in the GET /api/v1/server endpoint, allowing authenticated users to retrieve the arcadedb.ha.clusterToken value in cleartext. Attackers can use the leaked token with X-ArcadeDB-Cluster-Token and X-ArcadeDB-Forwarded-User headers to impersonate root and execute administrative actions including user creation, database operations, and server shutdown.NVD analysis in progress High CVSS 8.8 CVE-2026-67352luci-app-https-dns-proxy contains a stored cross-site scripting vulnerability in the resolver_url parameter that allows authenticated users to inject active HTML. When an administrator views the HTTPS DNS Proxy status page, the resolver URL is rendered as raw HTML and executes JavaScript in the administrator's browser origin.NVD analysis in progress High CVSS 7.6 CVE-2025-67649A SQL injection vulnerability has been identified in PHP Jabbers - Car Rental Script . Improper neutralization of input provided by user into parameters responsible for sorting functions allows an unauthenticated attacker to perform SQL Injection attacks.
This issue was fixed in version 4.1.NVD analysis in progress Critical CVSS 9.3 CVE-2025-67650An authenticated SQL injection vulnerability has been identified in multiple PHP Jabbers scripts. Improper neutralization of input provided by an authenticated user into parameters responsible for sorting functions allows an attacker to perform SQL Injection attacks.
This issue was fixed in the versions specified in the affected products list.NVD analysis in progress High CVSS 8.6 CVE-2025-69946SourceCodester Modern Loan Management System 1.0 is vulnerable to SQL Injection in ajaxData.php via the parameters district_id , division_id, region_id, and ward_id.NVD analysis in progress Critical CVSS 9.8 CVE-2025-69948SourceCodester Modern Loan Management System 1.0 is vulnerable to SQL Injection in /admin/delete_group.php?id=1.NVD analysis in progress Critical CVSS 9.8 CVE-2026-10079A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). When processing Kubernetes Deployments, ACS replaces deployment identity metadata based on the openshift.io/encoded-deployment-config label. A user with permission to create Deployments can set this label to "null", causing ACS to treat the workload as having empty UID, name and labels and namespace "default". This bypasses deploy-time policy detection and enforcement visibility, prevents correct persistence in Central and breaks violation reporting and compliance correlation for the affected deployment.NVD analysis in progress High CVSS 8.5 CVE-2026-10685The Zephyr Bluetooth GATT client CCC-write response handler gatt_write_ccc_rsp() in subsys/bluetooth/host/gatt.c invoked the application's params->subscribe() callback after it had already called params->notify(conn, params, NULL, 0).
Per the public GATT API, a notify callback with NULL data is the documented signal that the subscription has terminated and the bt_gatt_subscribe_params struct may be freed or reused by the application; calling subscribe() on the struct afterwards is a use-after-free, including an indirect call through the freed params->subscribe function pointer.
The error branch is remotely (adjacent) reachable: a Zephyr device acting as a GATT client that calls bt_gatt_subscribe() can be driven into this ordering when a connected GATT server peer answers the CCC write with an ATT Error Response (the peer-supplied error code flows through att_error_rsp -> att_handle_rsp into gatt_write_ccc_rsp).
For applications that free or recycle subscription parameters in their notification-termination handler, this results in memory corruption, a crash (denial of service), or potentially attacker-influenced control flow. The fix reorders the handler so the subscribe() callback runs before the terminating notify(NULL) in both the error and unsubscribe paths.Zephyrproject Zephyr High CVSS 7.6 CVE-2026-10686Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).Zephyrproject Zephyr High CVSS 7.5 CVE-2026-11770A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information.Redhat Directory Server High CVSS 7.5 CVE-2026-12251The Ultimate Member WordPress plugin before 2.12.1 does not filter administrator-level capabilities from the roles it makes selectable on its registration forms, and its post-registration safeguard against elevated accounts is disabled by default, allowing unauthenticated users to register with a site-defined role that carries administrator capabilities and gain administrative access, when such a role exists and a role-selection field is present on a published registration form.NVD analysis in progress High CVSS 8.1 CVE-2026-12695The miniOrange 2FA WordPress plugin before 6.2.6 does not validate the submitted one-time password against the targeted user's stored secret, instead verifying it against an attacker-supplied value, allowing an unauthenticated attacker who knows a victim's password to bypass two-factor authentication and gain access to the victim's account, including administrators.NVD analysis in progress High CVSS 8.1 CVE-2026-12720The Kirki WordPress plugin before 6.0.13 does not restrict which classes may be instantiated when it deserialises data that unauthenticated users can store, leading to PHP Object Injection that is triggered when an administrator later reviews the stored data. With a suitable gadget chain present on the site (via another installed Kirki WordPress plugin before 6.0.13, , or an outdated WordPress version), this could be leveraged to perform a variety of attacks, such as remote code execution.NVD analysis in progress High CVSS 7.5 CVE-2026-12721The Kirki WordPress plugin before 6.0.13 does not properly sanitise and escape a value taken from the request before using it in a SQL statement, allowing unauthenticated attackers to perform SQL injection attacks.NVD analysis in progress High CVSS 8.6 CVE-2026-13392The ElementsKit Elementor Addons WordPress plugin before 3.10.01 does not prevent a custom-widget definition saved by a user with administrative capabilities from being written verbatim into a generated PHP file that the ElementsKit Elementor Addons WordPress plugin before 3.10.01 subsequently executes, allowing arbitrary PHP code to run on the server; on a multisite network this lets a non-super subsite Administrator, who is otherwise denied code/file editing, reach host-level code execution beyond the privileges the network grants them.NVD analysis in progress High CVSS 7.2 CVE-2026-13609The Frontend Admin by DynamiApps WordPress plugin before 3.29.9 decodes HTML entities in a submitted form field value after sanitizing it, which restores HTML tags that the sanitizer had neutralized. A double-encoded payload submitted by an unauthenticated visitor is therefore stored as a live tag and later output without escaping on the Frontend Admin by DynamiApps WordPress plugin before 3.29.9's front-end display surfaces, resulting in stored cross-site scripting that executes in the browser of any user, including an administrator, who views a page displaying the submitted value.NVD analysis in progress High CVSS 8.8 CVE-2026-14319The GiveWP WordPress plugin before 4.16.3 does not properly restrict access to a REST API endpoint that returns recurring-donation records, allowing unauthenticated users to retrieve information about anonymous recurring donors, including their name and subscription details.NVD analysis in progress High CVSS 7.5 CVE-2026-14333The Demi WordPress plugin before 0.0.7 stores its full-site backup archives in a publicly accessible location under a predictable filename and without access protection, allowing unauthenticated attackers to download complete backups including the site database and its user password hashes.NVD analysis in progress High CVSS 7.5 CVE-2026-14483The Realtyna Organic IDX plugin + WPL Real Estate plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 5.2.0 via the upload function. This is due to missing file type validation in the upload function, combined with a publicly accessible I/O endpoint authenticated solely by static, plugin-seeded API credentials that are identical across all installations. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. The WPL I/O service endpoint is registered on the public WordPress init hook with no WordPress capability check, and the required api_key and api_secret values are static defaults seeded by the plugin's own SQL migration files, meaning any unauthenticated attacker who knows these publicly documented defaults can reach and exploit the vulnerable upload path. Critical CVSS 9.8 CVE-2026-14537Incorrect Authorization in the direct HTTP API tool invocation endpoint in Google mcp-toolbox versions v1.3.0 and v1.4.0 allows an unauthenticated attacker to invoke tools protected by the scopeRequired feature via sending tool invocation requests through legacy HTTP endpoints when the --enable-api flag is active.Google Mcp Toolbox For Databases Critical CVSS 9.8 CVE-2026-14538An improper authorization and security-boundary bypass vulnerability in the bigquery-execute-sql tool component of Google mcp-toolbox versions 0.16.1 through 1.4.0 allows an authenticated attacker to bypass allowedDatasets validation checks. The toolbox relies on the BigQuery dry-run API to enforce dataset restrictions, but due to a fail-open logic flaw, it bypasses validation when the API returns an empty array for specialized constructs. This allows the attacker to extract structural DDL schemas for explicitly excluded datasets via INFORMATION_SCHEMA, and access downstream federated row data via EXTERNAL_QUERY connections.Google Mcp Toolbox For Databases High CVSS 7.7 CVE-2026-14539An allocation of resources without limits vulnerability in the HTTP handler component of Google mcp-toolbox versions up to and including 1.4.0 allows an unauthenticated attacker to cause a denial of service (DoS). The /mcp endpoint handler reads incoming payloads directly into system memory using an unrestricted buffer loop (io.ReadAll) without applying defensive constraints such as http.MaxBytesReader or pre-read Content-Length enforcement. By submitting a single, massive HTTP request body, an attacker can linearly consume available host memory until the runtime process is terminated by an Out-Of-Memory (OOM) error.Google Mcp Toolbox For Databases High CVSS 7.5 CVE-2026-14541An authentication bypass and audience confusion vulnerability exists in the Google OAuth provider component of Google mcp-toolbox version 1.4.0. When a Google authService is initialized with mcpEnabled: true but lacks an explicitly defined audience or clientId, the ValidateMCPAuth pipeline for opaque tokens skips audience validation entirely. As a result, the toolbox will accept any valid Google OAuth access token—even those minted for unrelated ecosystem applications—granting unauthorized clients access to protected tools and data backends.Google Mcp Toolbox For Databases High CVSS 7.5 CVE-2026-14830The FlxWoo WordPress plugin before 3.1.1 does not verify with the payment processor that a checkout session was actually paid before marking the associated order as paid, allowing unauthenticated attackers to complete WooCommerce orders without paying.NVD analysis in progress High CVSS 7.5 CVE-2026-14919The ShopMonitor.io WordPress plugin before 1.2.0 does not properly restrict its email-rerouting test mode, gating it behind a trusted-source check that is satisfiable with client-supplied request headers, allowing unauthenticated attackers to redirect outgoing emails, including the WordPress administrator password-reset email, to an address they control and take over the administrator account.NVD analysis in progress Critical CVSS 9.8 CVE-2026-14930The JS Help Desk WordPress plugin before 3.1.4 does not perform any authorization, nonce, or ownership check on a front-end request dispatcher, allowing unauthenticated users to upload files (limited to the JS Help Desk WordPress plugin before 3.1.4's inert allowed extensions) and attach them to arbitrary users' support tickets.NVD analysis in progress High CVSS 7.5 CVE-2026-15048The Geeky Bot WordPress plugin before 1.2.8 does not perform an authorization check on one of its AJAX actions, allowing unauthenticated users to retrieve chat-history session metadata including WordPress usernames, user IDs, and timestamps.NVD analysis in progress High CVSS 7.5 CVE-2026-15258The Product Feed Manager For WooCommerce WordPress plugin before 7.6.1 does not properly sanitise and escape product-feed custom filter rules before using them in a SQL query, allowing users with the Contributor role and above to perform SQL injection attacks.NVD analysis in progress High CVSS 8.1 CVE-2026-15722A stack buffer overflow flaw was found in 389 Directory Server (389-ds-base). The get_ruvelement_from_berval() function in repl5_ruv.c copies digit characters from a network-supplied RUV berval into a fixed 16-byte stack buffer without bounds checking. A remote unauthenticated attacker can crash the LDAP server by sending a crafted StartNSDS50ReplicationRequest extended operation containing a replica ID field with more than 16 digit characters. The overflow occurs during payload decoding, before any authorization check. Stack protectors limit impact to denial of service.Redhat Directory Server High CVSS 7.5 CVE-2026-16236The Realtyna Organic IDX plugin for WordPress is vulnerable to Arbitrary File Upload in versions up to, and including, 5.3.0. This is due to missing file extension and content validation in the saveLiveImages() function combined with an insufficient authorization check on the get_keys() AJAX handler and a missing authentication check on the REST API import endpoint. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. High CVSS 8.8 CVE-2026-16503Deployment of the VPS.org one-click Supabase template deploys a PostgreSQL instance that is published on all interfaces (0.0.0.0:5432) with a default database password set to "postgres". Because Docker installs its own iptables rules, this exposure bypasses a standard host UFW configuration.NVD analysis in progress Critical CVSS 9.1 CVE-2026-16504Deployment of the VPS.org one-click Zulip template deploys a hardcoded application signing key, a default database password ("zulip"), and DISABLE_HTTPS=True.NVD analysis in progress Critical CVSS 9.8 CVE-2026-16843Some Hikvision Networking Products are vulnerable to authenticated command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.NVD analysis in progress High CVSS 7.2 CVE-2026-17346The fix for CVE-2026-12044 in pgAdmin 4 9.16 hardened qtLiteral and switched sixteen COMMENT ON / pgstattuple / pgstatindex templates to it, but missed several sinks that had been placed in test_sql_string_literal_lint.py's ALLOWLIST on the incorrect assumption that schema, table, publication, and subscription names sourced from pg_catalog via the browser tree could never contain an apostrophe. PostgreSQL permits arbitrary characters in quoted identifiers, so a low-privileged user able to CREATE TABLE, CREATE PUBLICATION, or CREATE SUBSCRIPTION can plant an apostrophe'd object name that breaks out of the unescaped '{{ name }}' template interpolation the moment any user (including a higher-privileged one) opens that object's Statistics or Dependencies tab, allowing arbitrary SQL statement injection in the viewing user's database session.
Affected sinks: the Index Statistics query for all-indexes listing (coll_stats.sql, both the 16_plus and default PostgreSQL-version template variants -- distinct from the single-index stats.sql path already fixed in CVE-2026-12044), and the publication and subscription dependencies.sql / get_position.sql templates (both the pg and ppas/EPAS dialect variants for publications).
Fix switches all of these templates to qtLiteral(conn) for name interpolation, and updates publications/__init__.py and subscriptions/__init__.py to pass conn=self.conn into the dependencies.sql render_template call so the qtLiteral filter has a connection to quote against. The corresponding ALLOWLIST entries in test_sql_string_literal_lint.py are removed now that these sinks are properly escaped rather than merely assumed safe. A behavioral regression test renders each fixed template with a stacked-statement apostrophe payload and asserts both that the object name appears exactly as qtLiteral-escaped and that the rendered SQL parses as exactly one statement, verifying the assertion genuinely fails against the pre-patch raw-interpolation form.
This issue affects pgAdmin 4: the Index Statistics sink from 1.0, and the Publications/Subscriptions sinks from 5.0, both before 9.17.Pgadmin Pgadmin 4 High CVSS 8.8 CVE-2026-17347The MASTER_PASSWORD_HOOK setting, introduced in pgAdmin 4 7.2, lets an administrator configure an external command that returns a per-user encryption key, with %u in the configured string replaced by the current user's name. The previous implementation substituted the username directly into the command string and executed the result with subprocess.Popen(..., shell=True). Because the username can originate from an external authentication source (OAuth/OIDC claims, Kerberos, webserver auth) rather than a value pgAdmin fully controls, a username containing shell metacharacters (';', '$()', backticks, pipes, '&&', newlines) allowed an authenticated user to execute arbitrary commands as the pgAdmin service account in any deployment where the configured hook string uses %u.
Fix tokenises the trusted, administrator-configured hook string into an argument vector first (using shlex in POSIX-quoting mode, with backslash-escaping disabled so Windows-style paths are not mis-parsed), substitutes the untrusted username into the individual argv elements, and executes with shell=False. The username is therefore always confined to a single argv element; any shell metacharacters it contains are inert. Administrators whose MASTER_PASSWORD_HOOK previously relied on shell features (pipes, redirection, environment-variable expansion, globbing) within the hook string itself must move that logic into the invoked script, since it is no longer interpreted by a shell.
This issue affects pgAdmin 4: from 7.2 before 9.17.Pgadmin Pgadmin 4 High CVSS 8.8 CVE-2026-17349/misc/workspace/adhoc_connect_server, part of the Workspaces feature introduced in pgAdmin 4 9.0, when passed the id of an existing server, clones that server via Server.clone(), which copies every column from the source row, including user_id, shared, shared_username, and the stored credential fields password, save_password, and tunnel_password. When a non-owner triggered an adhoc connect against another user's (in practice, typically an administrator's) shared server, the clone inherited that user's ownership, shared flag, and stored database credentials verbatim. pgAdmin persisted this cross-tenant, credential-bearing server row before the connection was even attempted, so it survived even when the connection subsequently failed. The non-owner could then open the newly-owned clone and pgAdmin would connect using the source user's stored database password on the non-owner's behalf, granting the non-owner use of database credentials -- and whatever database privileges they confer -- that were never their own.
Fix forces the cloned adhoc record's ownership fields (user_id, shared, shared_username) and stored credential fields (password, save_password, tunnel_password) to belong to the calling user and be cleared/private before committing, regardless of the source server's ownership, sharing state, or stored credentials. A regression test asserts that an adhoc connect triggered by a non-owner against another user's shared server persists a row owned by the caller, not shared, and without the source's stored credentials.
This issue affects pgAdmin 4: from 9.0 before 9.17.Pgadmin Pgadmin 4 Critical CVSS 9.6 CVE-2026-17351The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call).
An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration.
The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection.
This issue affects pgAdmin 4: from 9.13 before 9.17.Pgadmin Pgadmin 4 Critical CVSS 9 CVE-2026-17561Improper Control of Generation of Code ('Code Injection') vulnerability in Innotim Software, Telecommunications and Consulting Trade Ltd. Co. Logsign SIEM allows Code Injection.
This issue affects Logsign SIEM: before 6.4.108.NVD analysis in progress Critical CVSS 9.8 CVE-2026-17566pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor).
The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing.
This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18.Pgadmin Pgadmin 4 Critical CVSS 9.9 CVE-2026-18141A flaw was found in aap-gateway, a component of Ansible Automation Platform's Event-Driven Ansible (EDA). An unauthenticated remote attacker can bypass mutual Transport Layer Security (mTLS) authentication for event streams. This is achieved by manipulating the event stream URL and forging the HTTP Subject header. The system also inadvertently discloses the expected certificate subject in error messages, which simplifies the attack. This vulnerability allows an attacker to inject arbitrary events into EDA, potentially triggering automated workflows.NVD analysis in progress High CVSS 8.2 CVE-2026-18157A flaw was found in yggdrasil-worker-package-manager. A local attacker with existing access to the system could exploit an argument injection vulnerability in the APT backend. This allows specially crafted package names, which begin with a hyphen, to be misinterpreted as command options by apt-get. Successful exploitation could lead to remote code execution (RCE) with root privileges, enabling the attacker to fully compromise the system's integrity, confidentiality, and availability.NVD analysis in progress High CVSS 7.8 CVE-2026-18214Keycloak allows users to log in using Google accounts and can be configured to only allow users from specific Google Workspace domains. A flaw was found where the token exchange feature, which allows swapping a Google token for a Keycloak token, does not check these domain restrictions. This means an attacker with a valid Google account from a different domain could bypass the security check and gain access to the Keycloak realm.Redhat Build Of Keycloak High CVSS 8.1 CVE-2026-18215Keycloak provides a way to let users log in using Microsoft accounts while restricting access to a specific organization (tenant). A flaw was discovered where this restriction is ignored when using the token exchange feature. This means an attacker with a valid Microsoft token from a completely different organization could gain access to the Keycloak realm, potentially accessing sensitive data or performing unauthorized actions.Redhat Build Of Keycloak High CVSS 8.1 CVE-2026-18358A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. When the daemon is running in system mode with RDP enabled, the incoming connection handler bypasses the connection throttler, allowing an unauthenticated remote attacker to open many parallel pre-authentication connections to the RDP listener. This can accumulate accepted sockets and pending routing-token operations until timeout, exhausting resources and preventing legitimate users from establishing RDP sessions. This issue does not affect the upstream version.NVD analysis in progress High CVSS 7.5 CVE-2026-18394Incorrect authorization in the http_request tool in Strands Agents Tools before 0.8.2 might allow remote attackers to obtain credentials configured via HTTP_REQUEST_TOKEN_CONFIG by influencing the LLM to route requests through actor-controlled proxy infrastructure.
To remediate this issue, users should upgrade to version 0.8.2.NVD analysis in progress High CVSS 7.4 CVE-2026-18446fast-uri before 4.1.2, 3.1.5, and 2.4.4 requires a literal double forward slash to recognize a URI authority, so a reference that uses a backslash based introducer in place of it (backslash backslash, forward slash backslash, or backslash forward slash) is parsed with no authority and folds into the path. Node's native WHATWG URL parser instead treats a backslash as interchangeable with a forward slash for special schemes, so the two parsers extract different hosts from the same input. Applications that use fast-uri to enforce host based policy such as allowlists, SSRF filtering, or redirect validation before passing the same URL into Node's URL or fetch consumers can be steered to an unintended host. Upgrade to fast-uri 4.1.2, 3.1.5, or 2.4.4.NVD analysis in progress High CVSS 7.5 CVE-2026-18452DMS+ (Non-Mobile) developed by Rich Source has a Use of Hard-coded Credentials vulnerability. Unauthenticated remote attackers can exploit a fixed API key to gain control over all installed DMS+ devices.NVD analysis in progress Critical CVSS 10 CVE-2026-18481Stored cross-site scripting in the participant URL handling in AWS Ops
Wheel before PR #168 might allow an authenticated remote user to steal
session tokens and escalate to full administrative control of the
deployed instance via a crafted participant_url value containing a
dangerous URI scheme.
To remediate this issue, users should redeploy from the latest version of aws-ops-wheel.NVD analysis in progress High CVSS 7.3 CVE-2026-21662Unrestricted upload of file with dangerous type vulnerability in Johnson Controls FM Systems Employee allows Using Malicious Files.
This issue affects FM Systems Employee: before 2025.3.1.Johnsoncontrols Fms Employee Critical CVSS 9.8 CVE-2026-34641Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Adobe Premiere High CVSS 7.8 CVE-2026-38708TR1200 v2.4.15, TR3000 v2.4.21, WR300 v2.4.25, WR1200 v2.4.23, WR1300 v2.4.22, WR1500 v2.3.10, WR3000 v2.4.19, WR3600 v2.3.16, and WR6500 v2.3.15 were discovered to contain a command injection vulnerability in the system.setclock interface. This vulnerability allows attackers to execute arbitrary commands as root via a crafted input.NVD analysis in progress Critical CVSS 9.8 CVE-2026-38710TR1200 v2.4.15 and TR3000 v2.4.21 were discovered to contain a command injection vulnerability in the system.setclock interface. This vulnerability allows attackers to execute arbitrary commands as root via a crafted input.NVD analysis in progress High CVSS 7.2 CVE-2026-38711TR1200 v2.4.15, TR3000 v2.4.21, WR300 v2.4.25, WR1200 v2.4.23, WR1300 v2.4.22, WR1500 v2.3.10, WR3000 v2.4.19, WR3600 v2.3.16, and WR6500 v2.3.15 were discovered to contain a command injection vulnerability in the system.upgrade_check interface. This vulnerability allows attackers to execute arbitrary commands as root via a crafted input.NVD analysis in progress Critical CVSS 9.8 CVE-2026-38713TR1200 v2.4.15, TR3000 v2.4.21, WR300 v2.4.25, WR1200 v2.4.23, WR1300 v2.4.22, WR1500 v2.3.10, WR3000 v2.4.19, WR3600 v2.3.16, and WR6500 v2.3.15 were discovered to contain a command injection vulnerability in the ipsec_conn interface. This vulnerability allows attackers to execute arbitrary commands as root via a crafted input.NVD analysis in progress Critical CVSS 9.8 CVE-2026-43829Full details and mitigation steps are currently restricted and will be published at a later date.NVD analysis in progress High CVSS 7.5 CVE-2026-43830Full details and mitigation steps are currently restricted and will be published at a later date.NVD analysis in progress Critical CVSS 9.8 CVE-2026-43831Full details and mitigation steps are currently restricted and will be published at a later date.NVD analysis in progress High CVSS 7.5 CVE-2026-43832Full details and mitigation steps are currently restricted and will be published at a later date.NVD analysis in progress High CVSS 7.5 CVE-2026-46593A SQL injection vulnerability has been identified in the PHP Jabbers - PHP Poll Script. Improper neutralization of input provided by user to pjAdminPolls.controller.php endpoint allows an authenticated attacker to perform SQL Injection attacks.
This issue was fixed in version 4.1.NVD analysis in progress High CVSS 8.6 5201–5300 / 11286 CVE