cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-57805Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Select-Themes Tonda tonda allows PHP Local File Inclusion.This issue affects Tonda: from n/a through <= 2.5. High CVSS 7.5 CVE-2026-57810Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Saad Iqbal APIExperts Square for WooCommerce woosquare allows Blind SQL Injection.This issue affects APIExperts Square for WooCommerce: from n/a through <= 4.7.4. High CVSS 8.5 CVE-2026-57811Improper Control of Generation of Code ('Code Injection') vulnerability in Realtyna Realtyna Organic IDX plugin real-estate-listing-realtyna-wpl allows Remote Code Inclusion.This issue affects Realtyna Organic IDX plugin: from n/a through <= 5.2.0. Critical CVSS 10 CVE-2026-57813Incorrect Privilege Assignment vulnerability in properfraction MailOptin mailoptin allows Privilege Escalation.This issue affects MailOptin: from n/a through <= 1.2.77.3. Critical CVSS 9.8 CVE-2026-57814Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPMU DEV - Your All-in-One WordPress Platform Forminator forminator allows DOM-Based XSS.This issue affects Forminator: from n/a through <= 1.55.0.1. High CVSS 7.1 CVE-2026-57815Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in WPMU DEV - Your All-in-One WordPress Platform Forminator forminator allows Path Traversal.This issue affects Forminator: from n/a through <= 1.55.0.2. High CVSS 7.5 CVE-2026-57816Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in FunnelKit Funnel Builder by FunnelKit funnel-builder allows Reflected XSS.This issue affects Funnel Builder by FunnelKit: from n/a through <= 3.15.0.8. High CVSS 7.1 CVE-2026-57830Joomla Extension - joomshaper.com - Unauthenticated arbitrary file deletion in Helix Ultimate < 2.2.7 - The Joomla extension Helix Ultimate is vulnerable to an unauthenticated arbitrary file deletion.Ollyo Helix Ultimate Critical CVSS 9.1 CVE-2026-57855Cockpit CMS contains a missing authorization vulnerability in the Bucket file storage API (/system/buckets/api). The api() method in modules/System/Controller/Buckets.php executes bucket commands (ls, upload, removefiles, rename, createfolder) without performing any ACL or role check. Any authenticated user, regardless of role, can perform all bucket operations on any named bucket, including buckets intended for admin use only. High CVSS 8.8 CVE-2026-57856Cockpit CMS contains a path traversal vulnerability in the Bucket file storage API (/system/buckets/api). The api() method in modules/System/Controller/Buckets.php sanitizes the bucket name with preg_replace('/[^a-zA-Z0-9-_\\.]/','', $bucket), which permits '..' and '../' sequences. The sanitized value is interpolated into a Flysystem path as uploads://buckets/{bucket}. Flysystem's WhitespacePathNormalizer resolves 'buckets/..' to the empty string (the uploads storage root) without raising PathTraversalDetected because the '..' has a preceding component to consume. An authenticated low-privileged user can send a crafted request with a '../' bucket name to list, upload, and delete files across all buckets, including those belonging to other users or roles High CVSS 8.8 CVE-2026-58065The Apache Airflow Git provider runs its git-over-SSH operations with `StrictHostKeyChecking=no` by default, disabling SSH host-key verification. An attacker who can intercept the network path between an Airflow worker and the Git server can impersonate the server (man-in-the-middle), capturing the SSH deploy key or injecting malicious repository content. Deployments that use the Git DAG bundle or Git provider to clone over SSH with a deploy key are affected. The fix changes the default to verify host keys; upgrade to apache-airflow-providers-git `0.4.1` or later and configure a `known_hosts` file.Apache Apache-airflow-providers-git High CVSS 8.1 CVE-2026-58101Crypt::OpenSSL::X509 versions before 2.1.3 for Perl allow denial of service via NULL pointer dereference.
X509V3_EXT_d2i(ext) returns NULL when an extension's DER value fails to parse. basicC, ia5string, and auth_att dereference its result without a NULL check. keyid_data also dereferences akid->keyid, which is NULL for an empty AKI SEQUENCE (DER 30 00) even when the parse succeeds.
A caller invoking an affected helper on an extension from an untrusted certificate triggers a SIGSEGV that crashes the Perl process.NVD analysis in progress High CVSS 7.5 CVE-2026-58102Crypt::OpenSSL::X509 versions before 2.1.3 for Perl allow a heap out-of-bounds read via a long certificate extension OID in hv_exts.
When building the extension hash (via extensions(), extensions_by_long_name(), extensions_by_oid(), or has_extension_oid()), the code passes OBJ_obj2txt()'s return value as the hash-key length; because that value is the OID's full text length rather than the bytes written to the fixed-size buffer (129 bytes), an OID whose text is longer than the 129-byte buffer causes a read past the allocation, exposing adjacent heap memory as the returned hash key. extensions_by_name() uses the static shortname path and is not affected.NVD analysis in progress Critical CVSS 9.1 CVE-2026-58409ChurchCRM is an open-source church management system. Prior to version 7.4.0, an authenticated administrator can achieve Remote Code Execution (RCE) on the server by installing a malicious plugin ZIP archive containing a PHP webshell. The application explicitly includes 'php' in its ALLOWED_EXTENSIONS list, while the dangerous extensions denylist (DENIED_EXTENSIONS) fails to block standard .php files. Because `php` is explicitly included in the allowed extension list for plugin archives, and extracted files are placed directly under the web root, any PHP file inside the ZIP becomes immediately executable via HTTP — without even needing to "enable" the plugin through the application UI. The /plugins/install-url API route (management.php) allows an administrator to source the malicious ZIP from any attacker-controlled HTTPS URL, validating it only against an attacker-supplied SHA-256 hash. This issue has been fixed in version 7.4.0. Critical CVSS 9.1 CVE-2026-58410ChurchCRM is an open-source church management system. Prior to version 7.4.0, there was an authorization flaw in the family-scoped endpoints which allowed low-privileged users to read and modify other families’ records. An authenticated non-admin user with EditSelf access can supply another family’s `familyId` and access records outside their own family scope. The backend trusts the attacker-controlled `familyId` and loads the corresponding family entity by ID without verifying that the requested family belongs to the current user. If the same user also has Notes permission, they can create notes on another family’s record. This breaks the intended EditSelf scope and allows access to unrelated congregation records. This issue has been fixed in version 7.4.0. High CVSS 7.1 CVE-2026-58411ChurchCRM is an open-source church management system. Prior to version 7.4.0, Cross-Site Scripting (XSS) vulnerabilities were identified due to insufficient output encoding of user-controlled request parameter names and parameter values. The application reflects attacker-controlled input into JavaScript string contexts and HTML attribute contexts without proper sanitization or contextual output encoding. Affected endpoints observed during testing: /FamilyCustomFieldsEditor.php, /PaddleNumList.php and /admin/system/church-info. Potential consequences include session-token theft, account takeover, unauthorized actions on behalf of authenticated users, exposure of sensitive church member information, credential harvesting, phishing, and privilege escalation when administrators are targeted. This issue has been resolved in version 7.4.0. High CVSS 7 CVE-2026-58486HedgeDoc is an open source, real-time, collaborative, markdown notes application. Prior to version 1.11.0, HedgeDoc was vulnerable to a YAML alias bomb due to unsafe processing of the note frontmatter. HedgeDoc parsed frontmatter with js-yaml.load (js-yaml v3) via @hedgedoc/meta-marked, which resolved YAML anchor aliases. A compact malicious payload could therefore expand into a huge object structure, consuming excessive CPU. This expansion ran on every request to the publish view (/s/<shortid>) and, when placed under the opengraph key, the editor view (/<noteId>). A ten-level alias bomb could block the single Node.js event loop for roughly 235 seconds per request, causing concurrent requests to hang or drop and rendering the instance unavailable (DoS). Because the note was stored in the database, the impact survived process restarts until the note was removed. toobusy-js did not reliably mitigate the worst cases, as the event loop was saturated before the middleware could respond. This issue was fixed in version 1.11.0. High CVSS 8.3 CVE-2026-58500MCP Appium is an MCP server that provides AI assistants with tools to automate mobile app testing on Android and iOS. In versions prior to 1.85.10, the createLocatorGeneratorUI function interpolates attacker-controlled element attributes — text, content-desc, resource-id, and locator selector values — directly into an HTML template literal without any HTML or JavaScript context escaping. An attacker who controls the UI of the app under test can inject arbitrary HTML and JavaScript into the MCP UI resource returned by the generate_locators tool. When a victim's MCP client renders this resource, the injected script executes and can invoke arbitrary MCP tools via window.parent.postMessage, leading to unauthorized MCP tool execution such as taking screenshots, reading page source, or any other registered capability. This issue has been fixed in version 1.85.10.NVD analysis in progress High CVSS 8.2 CVE-2026-59245In the Apache Airflow FAB auth manager, a DAG whose `dag_id` is `DAGs` collided with the global all-DAGs permission resource name produced by `resource_name()`, so a user granted per-DAG `access_control` on that one DAG was silently granted the global all-DAGs permission (privilege escalation). The escalation triggers when a DAG named `DAGs` exists and a lower-privileged user is given per-DAG access to it, granting that user read/edit access to every DAG. Users are advised to upgrade to `apache-airflow-providers-fab` 3.7.2 or later, which disambiguates the resource-name collision.Apache Apache-airflow-providers-fab High CVSS 8.1 CVE-2026-59515Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Sergey AIWU ai-copilot-content-generator allows Blind SQL Injection.This issue affects AIWU: from n/a through <= 1.5.4. Critical CVSS 9.3 CVE-2026-59516Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Room 34 Creative Services, LLC ICS Calendar ics-calendar allows Reflected XSS.This issue affects ICS Calendar: from n/a through <= 12.1.1. High CVSS 7.1 CVE-2026-59518Deserialization of Untrusted Data vulnerability in wpWax Directorist directorist allows Object Injection.This issue affects Directorist: from n/a through <= 8.8.2. Critical CVSS 9.8 CVE-2026-59521Deserialization of Untrusted Data vulnerability in ShapedPlugin LLC Real Testimonials testimonial-free allows Object Injection.This issue affects Real Testimonials: from n/a through <= 3.1.15. High CVSS 7.2 CVE-2026-598019Router through version 0.4.41 contains an unauthenticated access vulnerability that allows remote attackers to interact with provider management API endpoints by sending requests without any credentials due to missing authentication middleware in the Next.js API routes under src/app/api/providers/*. Attackers can enumerate, create, modify, or delete provider connections to expose partial credentials, OAuth tokens, and API keys, redirect AI traffic to attacker-controlled servers, or cause complete denial of service by deleting all provider connections. Critical CVSS 9.8 CVE-2026-60121Vitec Flamingo 4.12.2 contains an unauthenticated OS command injection vulnerability in the admin/ajax/ping.php endpoint that allows remote attackers to execute arbitrary commands by exploiting a double-evaluation flaw in shell argument handling. The endpoint applies escapeshellarg() to the user-supplied host POST parameter before passing it to a system wrapper, but the wrapper retrieves the decoded value from argv and incorporates it into a second shell_exec() call without escaping, allowing injected commands to execute with root privileges via passwordless sudo.NVD analysis in progress Critical CVSS 9.8 CVE-2026-61458PasswordPusher before 2.9.2 contains a brute-force vulnerability in the POST /p/:token/access endpoint that lacks route-specific rate limiting and per-push lockout mechanisms. Attackers who know a push token can systematically guess passphrases at 120 attempts per minute without triggering any push-level defense, making short or dictionary-derived passphrases practically recoverable within hours or days. High CVSS 7.5 CVE-2026-61462mcp-gitlab contains a path traversal vulnerability in the job_id parameter of build/index.js that allows attackers to redirect GitLab API requests to arbitrary endpoints. Attackers can supply crafted job_id values like ../../../user to escape the intended path prefix and access arbitrary GitLab API resources using the operator's personal access token. High CVSS 8.6 CVE-2026-61463Shiori contains a privilege escalation vulnerability in the account update endpoint that allows authenticated users to modify the owner field without authorization checks. Attackers can escalate to administrator by submitting a crafted PATCH request with owner: true, then re-authenticate to obtain an admin JWT token granting full system access. High CVSS 8.8 CVE-2026-61498Vitec Flamingo 4.12.2 contains an unauthenticated OS command injection vulnerability in the admin/ajax/gen_graphs.php endpoint that allows remote unauthenticated attackers to execute arbitrary commands by supplying shell metacharacters in the start, end, key, or format HTTP GET parameters. Attackers can exploit the lack of input sanitization in the graph generation script, which passes user-supplied values directly to shell commands via passthru(), to execute arbitrary OS commands with root privileges due to the web server context having passwordless sudo access.NVD analysis in progress Critical CVSS 9.8 CVE-2026-61500Rejetto HFS 3.0.0 through 3.2.0 derives its session-cookie signing key from the non-cryptographic Math.random() generator and discloses outputs of the same generator to unauthenticated clients during login. A remote attacker can collect a small number of login responses, reconstruct the generator's state, recover the signing key, and forge a valid administrator session cookie, leading to full administrative access and remote code execution via the server_code configuration feature. Critical CVSS 9.8 CVE-2026-61955Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Hannan گرویتی فرم فارسی persian-gravity-forms allows Blind SQL Injection.This issue affects گرویتی فرم فارسی: from n/a through <= 3.0.2. High CVSS 7.6 CVE-2026-61956Cross-Site Request Forgery (CSRF) vulnerability in hamsalam ووسلام – همگام سازی ووکامرس و باسلام sync-basalam allows Cross Site Request Forgery.This issue affects ووسلام – همگام سازی ووکامرس و باسلام: from n/a through <= 1.9.1. High CVSS 7.1 CVE-2026-62143A Server-Side Request Forgery (SSRF) protection bypass existed in the html_to_markdown expansion module of misp-modules.
The module attempts to prevent requests to loopback, private, link-local, and other restricted IP address ranges. However, IP addresses were compared against the blocked ranges without first normalising IPv4-mapped IPv6 addresses.
An authenticated attacker able to invoke the module could supply an IPv4-mapped IPv6 address, such as:
http://[::ffff:127.0.0.1]/
http://[::ffff:169.254.169.254]/
Alternatively, the attacker could use a hostname that resolves to an IPv4-mapped IPv6 address. These addresses were treated as IPv6 addresses and therefore did not match the corresponding blocked IPv4 ranges.
Successful exploitation could cause the misp-modules server to connect to services available through its loopback interface, internal network, or link-local network. This could expose internal web services, administrative interfaces, or cloud instance metadata, with retrieved content potentially returned to the attacker as converted Markdown.
The vulnerability has been addressed by normalising IPv4-mapped IPv6 addresses to their underlying IPv4 representation before applying the blocked-range checks. URLs without a valid hostname are now also rejected. High CVSS 8.3 CVE-2026-62184luci-app-banip contains a log parsing vulnerability where the awk-based parser extracts the first IPv4 address from log lines regardless of field position, allowing attackers to inject arbitrary IPs via attacker-controlled fields like usernames. An unauthenticated remote attacker can inject an IP address into the login username field, causing banIP to block the wrong target while the real attacker remains unblocked. High CVSS 7.5 CVE-2026-62185Argo CD Helm Chart before 10.0.0 fails to install network policies by default, allowing any pod on a cluster to access repo-server and other Argo APIs. Attackers can exploit this unrestricted network access through combined attacks to achieve cluster compromise and remote code execution.NVD analysis in progress High CVSS 7.6 CVE-2026-62186OpenClaw versions before 2026.6.8 contain an authorization bypass vulnerability in OpenAI-compatible HTTP model overrides that allows lower-trust callers to perform actions requiring stronger authorization checks. Attackers can exploit misconfigured input paths to bypass admin authorization policies and execute restricted operations.Openclaw High CVSS 7.6 CVE-2026-62187OpenClaw Feishu tools (npm package @openclaw/feishu) in versions <= 2026.6.6 could ignore per-account disablement. A lower-trust caller or a configured input path could perform actions that should have required a stronger authorization or policy check, resulting in unauthorized operations. The issue is fixed in version 2026.6.9. Impact depends on the operator's configuration and whether lower-trust input can reach the affected feature.Openclaw Openclaw\/feishu High CVSS 8.1 CVE-2026-62188OpenClaw @openclaw/feishu versions 2026.6.6 and earlier contain an incorrect authorization vulnerability in which the Feishu permission tools could ignore per-account disablement settings. When the affected feature is enabled and reachable, a lower-trust caller or configured input path could perform actions that should have required a stronger authorization or policy check. The issue is fixed in version 2026.6.9.Openclaw Openclaw\/feishu High CVSS 8.1 CVE-2026-62189OpenClaw versions before 2026.6.9 contain a symlink following vulnerability in the mirror sync feature that allows lower-trust callers to perform actions requiring stronger authorization. Attackers can exploit remote symlink parents to bypass policy checks and authorization boundaries when the feature is enabled and reachable.Openclaw High CVSS 7.1 CVE-2026-62190OpenClaw versions before 2026.6.9 contain an authorization bypass vulnerability in the flock wrapper that allows lower-trust callers to execute or persist actions beyond their intended authorization. Attackers can leverage configured input paths to bypass durable exec approval binding and perform unauthorized operations when the affected feature is enabled.Openclaw High CVSS 8.8 CVE-2026-62191OpenClaw versions 2026.6.6 before 2026.6.9 contain an authorization bypass vulnerability in message mutation handling that allows lower-trust callers to perform actions requiring stronger authorization checks. Attackers can exploit misconfigured input paths to skip requester authorization and execute privileged operations when the affected feature is enabled and reachable.Openclaw High CVSS 7.1 CVE-2026-62192OpenClaw versions 2026.6.6 before 2026.6.9 contain an authorization bypass vulnerability in Discord guild actions that allows lower-trust callers to perform actions requiring stronger authorization checks. Attackers can exploit misconfigured input paths to skip cross-provider requester authorization and execute restricted operations.Openclaw High CVSS 8.1 CVE-2026-62194OpenClaw versions 2026.5.20 before 2026.6.9 contain a privilege escalation vulnerability in plugin install commands that allows lower-trust callers to execute or persist actions beyond their intended authorization. Attackers can exploit misconfigured input paths or enabled features to escalate privileges and perform unauthorized actions when the feature is reachable.Openclaw High CVSS 8.8 CVE-2026-62195OpenClaw versions 2026.5.20 before 2026.6.6 contain an authorization bypass vulnerability in the MCP loopback feature that allows lower-trust callers to execute owner-only tools. Attackers can bypass authorization checks through configured input paths to execute or persist actions beyond their intended permissions.Openclaw High CVSS 8.3 CVE-2026-62196OpenClaw versions 2026.3.22 before 2026.6.6 contain an authorization bypass vulnerability where WhatsApp group IDs can satisfy elevated sender allowlists. Attackers with lower-trust access can perform actions requiring stronger authorization by leveraging group ID validation in the affected feature.Openclaw High CVSS 8.3 CVE-2026-62197OpenClaw before 2026.6.6 contains a policy bypass vulnerability in browser CDP discovery that accepts blocked WebSocket URLs. Attackers with lower-trust access can reach network destinations that should have been blocked by OpenClaw policy when the affected feature is enabled.Openclaw High CVSS 8.5 CVE-2026-62199OpenClaw versions before 2026.6.6 contain a flaw in host exec environment filtering that can miss interpreter startup variables. When the affected feature is enabled and reachable, a lower-trust caller or configured input path can supply crafted environment variables to execute or persist actions beyond the caller's intended authorization.Openclaw High CVSS 8.8 CVE-2026-62200OpenClaw versions before 2026.6.6 contain a flaw in host exec environment filtering that could allow Git ext transport to be abused. When the affected feature is enabled and reachable, a lower-trust caller or configured input path could execute or persist actions beyond the caller's intended authorization.Openclaw High CVSS 8.8 CVE-2026-62240CrewAI before 1.15.1 contains a server-side request forgery vulnerability in the validate_url function that performs one-shot DNS resolution and blocklist checks before returning the original URL unchanged. Attackers can bypass the security filter by supplying URLs that redirect to internal addresses or use DNS rebinding techniques to access internal services and cloud metadata endpoints.Crewai High CVSS 7.4 CVE-2026-62242Spring Boot Admin Server before 4.1.2 contains a server-side request forgery vulnerability that allows unauthenticated attackers to register instances with attacker-controlled healthUrl and managementUrl parameters without validation against private IP ranges or metadata endpoints. Attackers can force the server to make HTTP requests to arbitrary internal addresses and retrieve response bodies via the actuator proxy to exfiltrate cloud credentials. High CVSS 8.6 CVE-2026-623279Router through version 0.4.41 contains an unauthenticated information disclosure vulnerability that allows remote attackers to retrieve plaintext API keys for all connected AI provider accounts by sending a single unauthenticated request to the /api/usage/stats endpoint. Attackers can exploit the missing authentication middleware on the Next.js API route to obtain full API key strings alongside token counts, cost breakdowns, and request metadata, enabling unauthorized use of connected AI provider accounts, billing fraud, and quota exhaustion. Critical CVSS 9.1 CVE-2026-623289Router through version 0.4.41 contain an unauthenticated information disclosure vulnerability that allows remote attackers to access sensitive user data by sending requests to unprotected API endpoints. Attackers can enumerate paginated request logs and retrieve complete AI conversation histories including system prompts, user messages, assistant responses, tool calls, and user email addresses by querying the request-logs and request-details API routes which lack authentication middleware. High CVSS 7.5 CVE-2026-6847Remote Code Execution vulnerability exists in ThemisNETPanel due to missing authentication for a critical file upload function. The application exposes an endpoint that allows unauthenticated attackers to upload arbitrary PHP files by providing a base64-encoded payload and to execute arbitrary code on the underlying server. This issue has been fixed by a patch released in April 2026.NVD analysis in progress Critical CVSS 9.3 CVE-2026-6875ServiceNow has addressed a remote code execution vulnerability that was identified in the ServiceNow AI platform. This vulnerability could enable an unauthenticated user, in certain circumstances, to execute code within the ServiceNow platform.
ServiceNow addressed this vulnerability by deploying a security update to hosted instances. Relevant security updates have also been provided to ServiceNow self-hosted customers and partners.
Further, the vulnerability is addressed in the listed patches and family releases, which have been made available to hosted and self-hosted customers, as well as partners. We are not currently aware of exploitation against ServiceNow instances.
We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so.NVD analysis in progress Critical CVSS 9.5 CVE-2026-7162Successful
exploitation of the integer overflow vulnerability could allow an attacker to
achieve system-level access to the affected software. High CVSS 7.8 CVE-2026-9492The MBStorage DRAM lighting control module within Gigabyte Control Center (GCC) developed by GIGABYTE Technology has an Improper Access Control vulnerability. Authenticated local attackers can send specific IOCTL commands through the driver MyPortIO_x64.sys bundled with the module, thereby arbitrarily reading and writing physical memory and obtaining kernel-level privileges. High CVSS 7.8 CVE-2026-10665In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN — e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it — the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len > CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity.Zephyrproject Zephyr High CVSS 7.4 CVE-2026-10666parse_ipv4() in subsys/net/ip/utils.c (reached via net_ipaddr_parse() for strings of the form "a.b.c.d:port") copies the port substring into a fixed 17-byte stack buffer (char ipaddr[NET_IPV4_ADDR_LEN + 1]) using a length of str_len - end - 1, where str_len is the full, unbounded input length and end is only the (<=15-byte) offset of the ':' delimiter. Because the destination size is never consulted, a crafted address string with a long suffix after the colon (e.g. "1.2.3.4:" followed by hundreds of bytes) causes an out-of-bounds stack write whose length and contents are fully attacker-controlled (memcpy of the suffix plus a trailing NUL), enabling memory corruption and at minimum a denial of service, and potentially control-flow hijack. The parser is reached from the standard socket API (zsock_getaddrinfo / literal-address resolution), DNS server-string configuration, and the eswifi Wi-Fi co-processor DNS-response path, so an application that resolves a network-influenced address string is exposed. The bug was introduced when the parser was added (Zephyr v1.9.0) and shipped in all releases through v4.4.0. The fix removes the unbounded copy and validates the port length before copying into a small dedicated buffer. Note: the equivalent IPv6 "[addr]:port" path in parse_ipv6() retains the same unbounded copy at this commit and remains a separate, still-reachable instance of the defect.Zephyrproject Zephyr Critical CVSS 9.8 CVE-2026-10667Zephyr's dynamic kernel-object tracking (kernel/userspace/userspace.c, formerly kernel/userspace.c) maintains a doubly-linked list (obj_list) of dynamically allocated kernel objects. Iteration over this list in k_object_wordlist_foreach() was performed under lists_lock using the SAFE iterator (which caches the next node), but list removal and freeing of nodes was performed under different, disjoint spinlocks: objfree_lock in k_object_free() and obj_lock in unref_check(). On an SMP system, while one CPU iterated obj_list under lists_lock, another CPU could unlink and k_free() the dyn_obj node that the iterator had cached as its next pointer, causing the iterator to dereference freed kernel memory (use-after-free / dangling list traversal). All of the racing operations are reachable from unprivileged user-mode threads via system calls: k_object_alloc/k_object_alloc_size and k_object_release drive removals through unref_check() (under obj_lock), while k_thread_abort and thread creation drive the iteration through k_thread_perms_all_clear()/k_thread_perms_inherit() (under lists_lock). A deprivileged user thread on a CONFIG_SMP + CONFIG_USERSPACE build can therefore corrupt the kernel's object-tracking structures across the userspace security boundary, yielding kernel memory corruption (potential privilege escalation) or a kernel crash (denial of service). The fix removes objfree_lock and serializes every obj_list modification under lists_lock, including holding it across find+remove in k_object_free() and around unref_check() in k_thread_perms_clear(). Affects CONFIG_SMP+CONFIG_USERSPACE+CONFIG_DYNAMIC_OBJECTS configurations; the defect dates to the 2019 spinlockification (commit 8a3d57b6cc6, first released in v1.14.0) and shipped through v4.4.0.Zephyrproject Zephyr High CVSS 7.8 CVE-2026-15479A vulnerability was found in H3C NX15 V100R017. Affected by this vulnerability is the function change_passwd of the file /api/login/modify of the component Administrator Password Modification Endpoint. The manipulation of the argument newPass results in weak password recovery. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure. High CVSS 7.3 CVE-2026-15480A vulnerability was identified in Trendnet TEW-635BRM up to 1.00.03. This affects the function start_httpd of the file /sbin/rc of the component Web Service. Such manipulation of the argument device_name leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor explains: "We are unable to confirm if the vulnerability exists. This item has been EOL since 2011. We will make an official announcement of possible vulnerabilities, and recommend users to switch devices." This vulnerability only affects products that are no longer supported by the maintainer. High CVSS 8.8 CVE-2026-15481A security flaw has been discovered in Trendnet TEW-635BRM up to 1.00.03. This vulnerability affects the function ipoa_test of the file /sbin/rc of the component IPoA WAN Connection Setup. Performing a manipulation of the argument ipoa_ipaddr results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor explains: "We are unable to confirm if the vulnerability exists. This item has been EOL since 2011. We will make an official announcement of possible vulnerabilities, and recommend users to switch devices." This vulnerability only affects products that are no longer supported by the maintainer. High CVSS 8.8 CVE-2026-15482A weakness has been identified in Aster Telecom Azcall 10/11. This issue affects some unknown processing of the file /azcall/adm/gestao_loja/sis.php?t=consultar of the component HTTP Handler. Executing a manipulation of the argument nome/perfil/status can lead to sql injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15483A security vulnerability has been detected in TRENDnet TEW-821DAP 1.12B01. Impacted is the function sub_41EC14 of the file /goform/tools_nslookup of the component ssi. The manipulation of the argument nslookup_target leads to buffer overflow. It is possible to initiate the attack remotely. The vendor explains: "We are unable to confirm the existence of the vulnerabilities for (...) TEW-821DAP (v1.0R) as these items have been EOL. " This vulnerability only affects products that are no longer supported by the maintainer. High CVSS 8.8 CVE-2026-15484A vulnerability was detected in TRENDnet TEW-821DAP 1.12B01. The affected element is the function sub_41EC14 of the file /goform/tools_nslookup of the component ssi. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The vendor explains: "We are unable to confirm the existence of the vulnerabilities for (...) TEW-821DAP (v1.0R) as these items have been EOL. " This vulnerability only affects products that are no longer supported by the maintainer. High CVSS 8.8 CVE-2026-15488A vulnerability was determined in hcr707305003 shiroiAdmin 1.1/1.3. Affected is the function FileController::upload of the file app/common/controller/FileController.php. Executing a manipulation of the argument File can lead to unrestricted upload. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 1.4 is able to address this issue. This patch is called 3ecde28ea8a20a3840dbfefd6d6863ee79a83e70. It is suggested to upgrade the affected component. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15489A vulnerability was identified in RafyMrX TOKO-ONLINE-ROTI up to ddfe1cd587be0a0b5135d8b6e85cce2ec3aece99. Affected by this vulnerability is an unknown functionality of the file proses/login.php. The manipulation of the argument Username leads to sql injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15490A security flaw has been discovered in RafyMrX TOKO-ONLINE-ROTI up to ddfe1cd587be0a0b5135d8b6e85cce2ec3aece99. Affected by this issue is some unknown functionality of the file proses/add.php. The manipulation of the argument kode_produk/kd_cs results in sql injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15491A weakness has been identified in RafyMrX TOKO-ONLINE-ROTI up to ddfe1cd587be0a0b5135d8b6e85cce2ec3aece99. This affects an unknown part. This manipulation causes missing authentication. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15497A vulnerability was determined in SonicCloudOrg sonic-agent up to 2.7.2. This affects an unknown function of the file sonic-server-controller/src/main/java/org/cloud/sonic/controller/controller/ExchangeController.java of the component JWT Authentication Filter. This manipulation causes code injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. High CVSS 7.3 CVE-2026-15498A vulnerability was identified in sergomanov SmartHomeAdatum up to cf495353d81b680675eb8d9aa14a318aa45ce12c. This impacts an unknown function of the file users.php of the component Login. Such manipulation of the argument Login leads to sql injection. The attack may be launched remotely. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-15506A security vulnerability has been detected in SecureAge CatchPulse up to 10.9.3. The affected element is an unknown function in the library saappctl.sys of the component Driver. Such manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed publicly and may be used. Upgrading to version 10.10.0 is sufficient to fix this issue. You should upgrade the affected component. The vendor was contacted early about this disclosure. High CVSS 7.8 CVE-2026-15511A vulnerability was determined in Comfast CF-WR631AX V3 up to 2.7.0.8. Affected by this vulnerability is the function system_wl_upload_pic_file of the file /usr/bin/webmgnt of the component FastCGI Backend. This manipulation of the argument filename causes os command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. Critical CVSS 9.8 CVE-2026-56238Capgo before 12.128.2 contains an information disclosure vulnerability in the Supabase PostgREST global_stats endpoint that allows unauthenticated attackers to read sensitive financial and operational metrics using only the public apikey. Remote attackers can query the /rest/v1/global_stats endpoint to expose MRR, total revenue, plan-tier revenue breakdown, customer counts, and operational telemetry. High CVSS 7.5 CVE-2026-56241Capgo before 12.128.2 contains a privilege escalation vulnerability where demoted super_admin users retain access to delete_non_compliant_bundles and count_non_compliant_bundles RPCs due to stale org_users.user_right column not being cleared during role binding deletion. Attackers can exploit this by maintaining a previously granted super_admin role to enumerate and bulk delete non-compliant bundles across the entire organization indefinitely. High CVSS 8.3 CVE-2026-56259Crawl4AI before 0.8.8 contains credential exfiltration vulnerabilities in the Docker API server that allow attackers to redirect LLM API calls to attacker-controlled endpoints and read arbitrary environment variables. Attackers can exploit the unauthenticated /md, /llm, and /llm/job endpoints by supplying a malicious base_url parameter and setting api_token to env:VARIABLE_NAME to exfiltrate provider API keys and server secrets including JWT SECRET_KEY for authentication bypass.Kidocode Crawl4ai High CVSS 8.2 CVE-2026-56260Crawl4AI before 0.8.7 contains an arbitrary file write vulnerability in the Docker API server's /screenshot and /pdf endpoints. The output_path parameter accepts arbitrary filesystem paths without validation, allowing an attacker to supply absolute or path-traversal values to write to any location writable by the application's user, overwriting server files and causing denial of service.Kidocode Crawl4ai Critical CVSS 9.1 CVE-2026-56271Flowise before 3.1.0 (affected versions 3.0.13 and earlier) uses weak hardcoded default JWT secrets ('auth_token', 'refresh_token') and default audience and issuer values ('AUDIENCE', 'ISSUER') in the enterprise passport authentication middleware (packages/server/src/enterprise/middleware/passport/index.ts). When the corresponding environment variables (JWT_AUTH_TOKEN_SECRET, JWT_REFRESH_TOKEN_SECRET, JWT_AUDIENCE, JWT_ISSUER) are not set, the application silently falls back to these publicly known defaults, allowing an attacker to forge valid JWTs and impersonate any user, including administrators, resulting in authentication bypass.Flowiseai Flowise Critical CVSS 9.8 CVE-2026-56308Capgo before 12.128.2 allows email address changes without requiring current password re-authentication or verification of the existing email address. An attacker with access to a valid session cookie or authenticated browser can change the account email to gain control of account recovery and bypass multi-factor authentication protections. High CVSS 7.3 CVE-2026-56313Capgo before 12.128.2 contains a cross-organization account disruption vulnerability in the SSO prelink endpoint that allows enterprise administrators to delete password identities of users in foreign organizations. Attackers with org.update_settings permission and an active SSO provider can call the prelink-users endpoint to permanently remove email-based authentication for any user matching the provider's email domain, forcing victims to use the attacker's SSO provider or complete password reset recovery. High CVSS 8.1 CVE-2026-58596Untrusted pointer dereference in Microsoft Edge (Chromium-based) allows an unauthorized attacker to elevate privileges over a network.Microsoft Edge Chromium High CVSS 8.3 CVE-2026-59260OpenWrt luci-app-samba4 read ACL grants file.exec permission on /usr/sbin/smbd, allowing authenticated delegated users to execute the Samba daemon with caller-controlled command-line arguments. Attackers can pass arbitrary Samba global options such as message command to a root smbd process, triggering command execution when SMB protocol messages are processed. High CVSS 8.8 CVE-2026-61875luci-app-upnp contains a stored cross-site scripting vulnerability that allows unauthenticated LAN clients to inject JavaScript via UPnP IGD AddPortMapping SOAP requests. Attackers can send malicious HTML in the NewPortMappingDescription field, which miniupnpd stores and luci-app-upnp renders without output encoding, executing the payload when administrators view the UPnP or Status pages. High CVSS 8.8 CVE-2026-61876LuCI versions fail to properly encode DHCPv6 lease hostnames before rendering in status tables, allowing adjacent network attackers to inject HTML markup. Attackers can send a DHCPv6 Client FQDN containing script tags that execute in the administrator's browser when viewing DHCP lease pages.NVD analysis in progress High CVSS 8.8 CVE-2025-6784The Code Engine plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 0.3.5 via the 'code-engine' shortcode. This is due to the plugin not restricting access to the code injecting functionality of the plugin. This makes it possible for authenticated attackers, with Contributor-level access and above, to execute code on the server. High CVSS 8.8 CVE-2026-13114The Motors – Car Dealership & Classified Listings Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content and User Biographical Info in all versions up to, and including, 1.4.112 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. High CVSS 7.2 CVE-2026-13353The WP Ultimate CSV Importer – WordPress Import & Export for CSV, XML & Excel plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 8.0.1 via the 'MappedFields' parameter. This is due to missing capability checks on the AJAX handlers for install_addon, saveMappedFields, and StartImport, combined with the plugin nonce being exposed to any authenticated user who can load an admin page, allowing a Subscriber to install the Import WooCommerce add-on, persist attacker-controlled PHP expressions in the MappedFields parameter, and trigger evaluation via eval() in ImportHelpers::get_meta_values(). This makes it possible for authenticated attackers, with subscriber-level access and above, to execute code on the server. High CVSS 8.8 CVE-2026-13378The Form Vibes – Database Manager for Forms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Contact Form 7 Form Field in all versions up to, and including, 1.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. High CVSS 7.2 CVE-2026-1359The Genolve – AI image AI video generation plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the genolve_setOpt() function in all versions up to, and including, 5.0.5. This makes it possible for authenticated attackers, with Contributor-level access and above, to update arbitrary WordPress options, including enabling user registration and setting the default role to administrator, resulting in privilege escalation. High CVSS 8.8 CVE-2026-13756The WP Grid Builder plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.3.3. This is due to missing authorization and meta key validation in the `update()` handler for the `/wp-json/wpgb/v2/metadata` REST endpoint. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to Administrator by updating their own `wp_capabilities` user meta with a crafted nested array payload. High CVSS 8.8 CVE-2026-14262The Simple JWT Login – Allows you to use JWT on REST endpoints. plugin for WordPress is vulnerable to Authentication Bypass to Privilege Escalation in all versions up to, and including, 3.6.6 via the `payload` parameter. The vulnerability exists because `AuthenticateService::generatePayload()` only overwrites JWT payload keys whose names appear in the admin-configured `jwt_payload` list — leaving any attacker-supplied identity claims such as `email`, `id`, or `username` intact and signed into the JWT with the site's HS256 secret. This makes it possible for authenticated attackers, with subscriber-level access and above, to escalate their privileges to that of an Administrator by injecting a target administrator's email address into the `payload` parameter at the `/wp-json/simple-jwt-login/v1/auth` endpoint, then redeeming the resulting JWT at the `/autologin` endpoint to obtain a fully authenticated session as that administrator. High CVSS 8.8 CVE-2026-15155The Essential Addons for Elementor – Popular Elementor Templates & Widgets plugin for WordPress is vulnerable to Authenticated Account Takeover via Email Header Injection in all versions up to, and including, 6.6.10 This is due to insufficient server-side validation of a Login/Register widget setting used to construct outgoing email headers — the allowed-values restriction is enforced only in the client-side editor UI and not on the server, and the applied sanitization does not strip or encode CR/LF characters, allowing CRLF sequences stored in that setting to survive into raw mail headers. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject an additional Bcc header into the WordPress administrator's password-reset notification email, receive a copy of a valid administrator password-reset link, and achieve full administrator account takeover. High CVSS 8.8 CVE-2026-15335The Booking Package plugin for WordPress is vulnerable to generic SQL Injection via 'email' Form Parameter (form<N>) in all versions up to, and including, 1.7.20 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The vulnerable REST API endpoint /wp-json/booking-package/v1/request is registered with permission_callback: __return_true and wp_magic_quotes does not apply to REST-sourced $_POST values, meaning single quotes in the payload reach the SQL sink intact without any authentication requirement. The impact of this is severely limited as the vulnerable parameter goes through is_email. High CVSS 7.5 CVE-2026-15338The LA-Studio Element Kit for Elementor plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.6.1 via the get_type_template function. This makes it possible for authenticated attackers, with contributor-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. The wp_normalize_path function used in get_template only normalizes directory separators and does not resolve or reject path traversal sequences, while the extension check is trivially bypassed because the caller already appends the required extension to the traversal payload. High CVSS 7.5 CVE-2026-2354The Swiss Toolkit For WP plugin for WordPress is vulnerable to arbitrary file upload due to a flawed file type validation bypass in the `upload_extension_files()` function in all versions up to, and including, 1.4.6. The `upload_extension_files()` function hooks into WordPress's `wp_check_filetype_and_ext` filter and uses `strpos()` to check if a filename contains a configured extension string, rather than verifying the actual file extension. This makes it possible for authenticated attackers, with Author-level access and above, to upload arbitrary files (including PHP) on the affected site's server which may make remote code execution possible, granted the "Enhanced Multi-Format Image Support" feature is enabled with at least one extension (e.g., avif) in the allowed formats. High CVSS 8.8 CVE-2026-3576The Planyo Online Reservation System plugin for WordPress is vulnerable to Server-Side Request Forgery leading to Local File Inclusion in all versions up to, and including, 3.0. The ulap.php file acts as an AJAX proxy and is directly accessible without WordPress bootstrapping or any authentication. The send_http_post() function validates the host of the provided URL against an allowlist that includes 'localhost', but critically fails to validate the URL scheme/protocol. This makes it possible for unauthenticated attackers to supply a file:// URL (e.g., file://localhost/etc/passwd) which bypasses the host allowlist check because parse_url() returns 'localhost' as the host. The URL is then passed to curl_init() or fopen(), both of which support the file:// protocol, allowing the attacker to read arbitrary local files on the server and have their contents returned in the HTTP response. This can lead to disclosure of sensitive files such as /etc/passwd, wp-config.php (containing database credentials and authentication keys), and other server-side files. High CVSS 7.2 CVE-2026-4661The WP CTA – Sticky CTA Builder, Generate Leads, Promote Sales plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'fildname' parameter in all versions up to, and including, 2.2.2. This is due to insufficient escaping of user-supplied column names in the ajaxCheck() method and lack of preparation in the $wpdb->update() call. The vulnerability is compounded by the complete absence of authorization checks and the endpoint being registered for unauthenticated users via wp_ajax_nopriv_. This makes it possible for unauthenticated attackers to inject arbitrary SQL queries and extract sensitive information from the database via time-based blind SQL injection techniques, including administrator password hashes. High CVSS 7.5 CVE-2026-56303Capgo before 12.128.2 contains an information disclosure vulnerability in the find_apikey_by_value PostgreSQL function marked SECURITY DEFINER and executable by the anon role. Unauthenticated attackers can call this function via the /rest/v1/rpc/find_apikey_by_value endpoint to retrieve sensitive API key metadata including user_id, mode, org scoping, and expiration details when supplied a valid key value. High CVSS 7.5 CVE-2026-56372ImageMagick before 7.1.2-19 contains a heap buffer overflow vulnerability in the magnify operation that allows attackers to read out of bounds memory. An unrecognized magnify:method value triggers an out of bounds read, potentially exposing sensitive information or causing denial of service.Imagemagick Critical CVSS 9.1 CVE-2026-57827Joomla Extension - rsjoomla.com - Unauthenticated file upload in RSFiles component < 1.17.12 - The Joomla extension RSFiles is vulnerable to an unauthenticated arbitrary file upload that allows uploading executable files and leads to full RCE.Rsjoomla Rsfiles\! Critical CVSS 9.8 9501–9600 / 11286 CVE