cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-53903MCO is vulnerable to an Insecure Direct Object Reference (IDOR) vulnerability in the /customer/servlet/mco/webapi/trading-document/fetchPdfStatement endpoint. The application does not properly validate whether an authenticated user is authorized to access a requested document, allowing direct retrieval based on a user-supplied identifier.
An attacker can access trading documents belonging to other users by providing a valid document ID. Although exploitation requires guessing the identifier, predictable ID patterns enable feasible enumeration, leading to unauthorized disclosure of sensitive information.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.Mycomplianceoffice High CVSS 8.1 CVE-2026-53904MCO is vulnerable to Account Denial of Service due to improper implementation of password reset functionality. Each password reset request invalidates previously set password as well as previously issued temporary passwords, furthermore, password resets are not limited in any way. An attacker who provides victim's email and answer to their security question, can successfully initiate the reset process and continuously invalidate credentials, effectively locking the victim out of their account. Answering security questions has a limited number of tries which lowers the risk of this vulnerability.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.Mycomplianceoffice Mco High CVSS 7.1 CVE-2026-53905MCO does not properly enforce authorization checks in the /customer/servlet/mco/webapi/admin-view-hierarchy/get-acl-tree-structure endpoint. An authenticated, low-privileged user can retrieve administrator access control structures without proper authorization checks.
This may expose sensitive permission mappings and internal configuration details.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.Mycomplianceoffice High CVSS 7.1 CVE-2026-53906MCO is vulnerable to Path Disclosure and Path Traversal in file handling functionality related to data export and upload. Improper validation of the filename parameter allows writing files to arbitrary locations as well as indirect disclosure of absolute server paths through error messages.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.Mycomplianceoffice High CVSS 8.2 CVE-2026-54074Tina is a headless content management system. @tinacms/cli versions prior to 2.4.3 contain a Remote Code Execution vulnerability in the Forestry-to-Tina migration command. The internal helper addVariablesToCode unquotes any value matching the marker "__TINA_INTERNAL__:::(.*?):::" inside the stringified collection JSON. User-supplied label and name fields from .forestry/**/*.yml are placed into that JSON without any sanitisation. An attacker who controls a Forestry-style project can therefore inject arbitrary JavaScript into the generated tina/templates.{ts,js} file. The injected code is written at module top level, so it executes the moment the developer runs tinacms dev or tinacms build, with the developer's privileges. This issue has been fixed in version 2.4.3. High CVSS 7.8 CVE-2026-54263Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, reflected cross-site scripting (XSS) vulnerability exists on the dynamic image URL generator view within the Wagtail admin interface. A user with a limited-permission editor account for the Wagtail admin could craft a URL that, when viewed by a user with higher privileges, could perform actions with that user's credentials. The vulnerability is present for all sites, even if they do not enable the dynamic image serve view. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2.Torchbox Wagtail High CVSS 7.3 CVE-2026-54399Uncontrolled Resource Consumption vulnerability in the HTTP/1.1 message parser in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending messages with excessive number of headers / excessive header lengthApache Httpcomponents Core High CVSS 7.5 CVE-2026-54428Allocation of resources without limits or throttling in the HTTP/2 HPACK decoder in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending oversized compressed header blocks before the HTTP/2 SETTINGS acknowledgement causes the configured header list size limit to be applied.Apache Httpcomponents Core High CVSS 7.5 CVE-2026-54592Oj (Optimized JSON) is a JSON parser and Object marshaller packaged as a Ruby gem. In versions prior to 3.17.3, Oj::Doc#each_child, when invoked recursively over a deeply nested JSON document, overflows a fixed-size stack buffer and aborts the process, leading to DoS. In a two-step chain in ext/oj/fast.c, doc_each_child increments doc->where past the where_path[MAX_STACK = 100] array with no bounds check and never restores it (the doc->where-- is missing), so calling each_child recursively from inside the yield block drives doc->where beyond the array. On the next entry the function copies the path into the 800-byte stack-local buffer save_path[MAX_STACK] using wlen = doc->where - doc->where_path, so when the previous recursive call left doc->where past where_path[100] the wlen exceeds MAX_STACK and the memcpy overflows save_path on the C stack; because the Oj::Doc parser imposes no JSON nesting-depth limit (relying on a C-stack pressure check), deeply nested attacker input reaches this path. This issue has been fixed in version 3.17.3. High CVSS 7.5 CVE-2026-54712OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.27.0, the RMI context propagation payload reader limits the number of context entries but does not limit the aggregate size of the strings read from the stream. An attacker who can reach an RMI endpoint on an instrumented JVM can send an oversized context propagation payload. This can cause excessive memory allocation while the JVM reads the payload, potentially leading to denial of service. The issue affects only deployments where RMI instrumentation is enabled and an RMI endpoint is network-reachable. This issue has been fixed in version 2.27.0.Linuxfoundation Opentelemetry Instrumentation For Java High CVSS 7.5 CVE-2026-55153mchange-commons-java is a Java library of shared utility classes used by mchange projects like the c3p0 connection pool. Prior to version 0.6.0, its JNDI ObjectFactory implementation (com.mchange.v2.naming.JavaBeanObjectFactory) will construct objects of arbitrary classes and initialize "JavaBean"-style properties, which for certain classes enables JNDI injection and "deserialization gadgets." Such initialization is unsafe for some classes: for example, setting the contentType property of a Swing JEditorPane to text/html and its text property to HTML containing a stylesheet <link> will provoke an HTTP GET on an arbitrary URL, potentially from within a trusted security domain. The problem is aggravated by the library's ReferenceIndirector, through which malicious JNDI Reference objects can be smuggled in for dereferencing wherever an application reads a Java-serialized object. This has been resolved in version 0.6.0.NVD analysis in progress High CVSS 7.1 CVE-2026-55660Tina is a headless content management system. In versions prior to @tinacms/app 2.5.6 and tinacms 3.9.3, cross-origin postMessage handlers and a rich-text URL-sanitization bypass enable stored XSS and session takeover. The library registers window message listeners — the useTina overlay handler, the OAuth authentication popup handler, and the admin↔preview iframe GraphQL reducer — that act on event.data without verifying event.origin or event.source and post messages using non-specific target origins, while insufficient URL sanitization in rich-text content allows malicious URLs to persist and execute. A page the victim visits (or a window in an opener/iframe relationship with a Tina admin) can forge messages to drive the editor, inject preview content, or observe/forge the OAuth popup channel to take over an authenticated editing session. This issue has been fixed in versions @tinacms/app 2.5.6 and tinacms 3.9.3. High CVSS 7.6 CVE-2026-55790Craft CMS is a content management system (CMS). In versions 5.0.0-RC1 through 5.9.22 and 4.0.0-RC1 through 4.17.15, an attacker with only a GitHub account can plant a JavaScript payload in a craftcms/cms issue title. When a Craft admin uses the CraftSupport widget’s "Give feedback" screen and types a search term that returns the poisoned issue, the payload executes in the admin’s control panel session. No control panel account or elevated privileges are required on the attacker’s side. This issue has been fixed in versions 4.17.16 and 5.9.23. High CVSS 7.4 CVE-2026-56150Allocation of Resources Without Limits or Throttling (CWE-770) in Fleet Server can lead to a denial of service via Excessive Allocation (CAPEC-130). An attacker can submit a specially crafted request to an upload endpoint that causes excessive memory consumption, which may render Fleet Server unavailable.Elastic Fleet Server High CVSS 7.5 CVE-2026-57516Ray prior to 2.56.0 contains an unsafe deserialization vulnerability in the WebDataset reader that allows attackers to achieve remote code execution by supplying a malicious tar archive to the read_webdataset() function. The _default_decoder() function in webdataset_datasource.py unconditionally calls pickle.loads() on tar entries with .pkl/.pickle extensions and torch.load() with weights_only=False on .pt/.pth entries, executing arbitrary code inside Ray remote workers on every worker that processes the malicious archive.Anyscale Ray High CVSS 8.8 CVE-2026-57517Control Web Panel before 0.9.8.1225 contains a blind SQL injection vulnerability that allows unauthenticated remote attackers to execute arbitrary SQL queries by submitting unsanitized input through the userRes POST parameter at the user endpoint. Attackers can exploit MySQL root privileges obtained via the injection to write arbitrary files using INTO DUMPFILE, enabling deployment of a PHP webshell to the web-accessible roundcube logs directory and achieving remote code execution as the cwpsvc account.NVD analysis in progress Critical CVSS 9.8 CVE-2026-57692Incorrect Privilege Assignment vulnerability in LCweb PrivateContent allows Privilege Escalation.
This issue affects PrivateContent: from n/a through 9.9.2. Critical CVSS 9.8 CVE-2026-57723Cross-Site Request Forgery (CSRF) vulnerability in e4jvikwp VikBooking Hotel Booking Engine & PMS allows Path Traversal.
This issue affects VikBooking Hotel Booking Engine & PMS: from n/a through 1.8.12. High CVSS 7.4 CVE-2026-57736Insertion of Sensitive Information Into Sent Data vulnerability in HubSpot allows Retrieve Embedded Sensitive Data.
This issue affects HubSpot: from n/a through 11.3.51. High CVSS 7.4 CVE-2026-58025Deserialization of untrusted data vulnerability in Wikimedia Foundation MediaWiki.
This vulnerability is associated with program files includes/Import/WikiImporter.Php, includes/Import/WikiRevision.Php, includes/Logging/LogEntryBase.Php.
This issue affects MediaWiki: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9.Mediawiki Critical CVSS 9.8 CVE-2026-58036Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation MediaWiki.
This vulnerability is associated with program files includes/Api/ApiQueryAllUsers.Php, includes/Api/ApiQueryUsers.Php, includes/Permissions/PermissionManager.Php, includes/User/UserGroupManager.Php.Mediawiki High CVSS 7.5 CVE-2026-58126PACSgear PACS Scan 5.2.1 contains an unauthenticated remote code execution vulnerability that allows remote attackers to read and write arbitrary files by exploiting an exposed .NET Remoting TCP service on port 22222 via PGImageExchQueue.exe without any authentication requirement. Attackers can chain the arbitrary file write primitive with DLL hijacking in PGImageExchangeQueueSvc.exe, which loads missing DLLs such as CRYPTSP.DLL from the application directory, to achieve remote code execution as NT Authority\SYSTEM upon service restart.Hyland Pacsgear Critical CVSS 9.8 CVE-2026-58127PACSgear MediaWriter 5.2.1 exposes a .NET Remoting TCP service on port 9000 via PacsgearMediaServerEngine.dll, registered with ObjectURIs RemoteObj and UIRemoteObj, without any authentication requirement. By exploiting the MarshalByRefObject object unmarshalling technique and implementing .NET WebClient class methods, an unauthenticated remote attacker can read and write arbitrary files on the host filesystem. The ObjectURIs are identical across all installations by default. Chaining the arbitrary file write primitive with DLL hijacking opportunities in the MediaWriter service (which runs as NT Authority\\SYSTEM and loads missing DLLs such as CRYPTBASE.DLL from the application directory) enables unauthenticated remote code execution as SYSTEM upon service restart.Hyland Pacsgear Critical CVSS 9.8 CVE-2026-58263Jodit Editor is a WYSIWYG editor with written in pure TypeScript file and image editing capabilities. In versions prior to 4.12.28, the built-in clean-html sanitizer can be bypassed by a MathML/<style> carrier that hides a dangerous element from the sanitizer's element walk, so a no-interaction event handler survives into the editor value, potentially causing Mutation XSS. When an application supplies attacker-influenced HTML to the editor's value-set or insertion paths, the sanitized output still contains a live <img ... onload=...> (or another non-onerror handler such as onfocus). A consumer that renders that output (element.innerHTML = editor.value) executes the handler with no user interaction. This issue has been fixed in version 4.12.28. High CVSS 7.2 CVE-2026-58399@acastellon/auth is an authentication control system for microservices. Versions prior to 2.3.0 appear to allow an unauthenticated authentication bypass in validateToken() through spoofable auth-user and Host request headers. The validateToken middleware contains a service-to-service bypass for auth-user: service-brother when req.get('host').startsWith(getHostName()). Both values involved in the check can be influenced by an unauthenticated HTTP client: auth-user is a request header, and Host is also client-controlled. As a result, a remote unauthenticated attacker can send a request with crafted headers and bypass token validation before the normal legacy/JWT/OIDC validation logic runs. A fix has been implemented in v2.3.0. High CVSS 8.7 CVE-2026-58452JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain an OS command injection vulnerability that allows authenticated attackers to achieve remote code execution by supplying a malicious Wireless parameter to the HTTP PUT NetSDK/Factory SetMAC endpoint. Attackers can craft a string beginning with a valid MAC-like prefix followed by a semicolon and a shell payload, which bypasses partial sscanf() validation and is passed unsanitized into an echo shell command executed through a system() wrapper. High CVSS 8.8 CVE-2026-58453JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain a hard-coded credentials vulnerability that allows network-adjacent attackers to gain unauthorized access by using the default admin username with an empty password accepted by the anyka_ipc HTTP service on port 80. Attackers can authenticate with these hardcoded credentials to access camera snapshots, video streams, network configuration, and factory-level API endpoints including the SetMAC command injection surface. Critical CVSS 9.8 CVE-2026-58454JAIOTlink C492A-W6 Wi-Fi IP cameras running firmware 4.8.30.57701411 contain a remote code execution vulnerability that allows authenticated attackers to execute arbitrary shell scripts by writing to the writable persistent JFFS2 storage path and triggering execution through the authenticated HTTP endpoint. Attackers can stage a malicious script in the writable persistent storage and request the config endpoint to invoke it via popen(), achieving persistent remote code execution that survives device reboots. High CVSS 7.5 CVE-2026-58457Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) contains an unauthenticated OS command injection vulnerability that allows network-adjacent attackers to execute arbitrary shell commands by injecting unsanitized input through the smacfilter_conf handler in the commuos web backend. Attackers can append semicolon-delimited payloads to the name, enable, or mac GET parameters, which are passed without sanitization into sprintf() to build uci shell commands executed via doSystemCmdComlib(), granting full root-level control of the device. Critical CVSS 9.8 CVE-2026-58521Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in The Wikimedia Foundation Mediawiki - Cargo Extension allows SQL Injection.
This issue affects Mediawiki - Cargo Extension: from * before 1.43.9,1.44.6,1.45.4.Mediawiki Cargo Critical CVSS 9.8 CVE-2026-58592Ladybird contains a dangling-reference memory-safety flaw in its WebAssembly ESM-integration module loader. When a JavaScript function is imported into a WebAssembly module via the ESM path, WebAssemblyModule.cpp passes a stack-local Wasm::FunctionType by reference to create_host_function, whose host callback captures and later reads that reference; once the ESM link-loop iteration ends the FunctionType is destroyed, leaving the callback with a dangling reference (the normal instantiate path uses a long-lived reference and is not affected). Stale result-type data lets the host callback return an empty result vector for a statically non-empty result, so the destination register retains an attacker-influenced value that is then consumed by the WASM-GC array.set handler, which bit-casts the reference low bits to an ArrayInstance pointer after only a null check, yielding an arbitrary write. A web page can chain this into code execution in the WebContent process. Verified reachable from HTML content without any instrumentation or source modification. High CVSS 8.3 CVE-2026-58593NodeBB does not bind the claimed author of an inbound ActivityPub object to the authenticated remote actor. The inbound middleware verifies the HTTP-signature actor and checks the origin of object.id, but never validates that attributedTo corresponds to the sender. In the object mock, attributedTo is used directly as a uid, and actors.assert silently ignores numeric identifiers (filtering them out without re-deriving the uid), so a federated remote actor can set attributedTo to a bare numeric value such as 1 and have the resulting post or private message created with that local uid as author, including the administrator account. This lets a remote attacker forge posts and direct messages attributed to arbitrary local users. Requires the ActivityPub/federation feature to be enabled.Nodebb High CVSS 7.5 CVE-2026-6070The WP-BusinessDirectory plugin for WordPress is vulnerable to Unauthenticated Arbitrary File Deletion in versions up to and including 4.0.1. This is due to insufficient path validation in the remove() method of the JBusinessDirectoryControllerUpload class. The task=upload.remove endpoint is accessible without authentication via the plugin's frontend routing system. The _filename parameter is accepted with RAW filter (no sanitization), and the helper function makePathFile() only normalizes directory separator characters without stripping path traversal sequences (../). When combined with the _path_type=2 parameter, which sets the base directory to the plugin's site folder, an attacker can supply a _filename value containing ../ sequences to traverse outside the plugin directory and call PHP's unlink() on arbitrary files — including wp-config.php, wp-config-backup.php, or other critical server files accessible to the web server process. This makes it possible for unauthenticated attackers to delete arbitrary files on the server. Critical CVSS 9.1 CVE-2026-6682In FatFS R0.16 and earlier contains a FAT32 integer overflow bug in mount_volume() where fasize *= fs->n_fats can wrap, leading to attacker-controlled file-size metadata and unsafe read lengths in downstream callers. This maps to CWE-190 (Integer Overflow or Wraparound). Estimated CVSS v3.1 vector: CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H (7.6, High). Remote delivery is also possible in OTA/update pipelines. The estimated CISA SSVC vectors are Exploitation: PoC, Technical Impact: Total.Elm-chan Fatfs High CVSS 7.6 CVE-2026-6687FatFs R0.16 and earlier contains a stack overflow bug in f_getlabel() because exFAT label length (XDIR_NumLabel) is trusted without enforcing spec maximums. This maps to CWE-121 (Stack-based Buffer Overflow). Estimated CVSS v3.1 vector: CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H (7.6, High). The estimated CISA SSVC vectors are Exploitation: PoC, Technical Impact: Total.Elm-chan Fatfs High CVSS 7.6 CVE-2026-6688FatFs R0.16 and earlier contains a downstream-caller vulnerability pattern associated with FatFs long filename handling. With LFN enabled, fno.fname can be up to 255 characters; many callers copy it into short fixed buffers without bounds checks, causing overflow. This maps to CWE-120 (Buffer Copy without Checking Size of Input). Estimated CVSS v3.1 vector: CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H (7.6, High). The estimated CISA SSVC vectors are Exploitation: PoC, Technical Impact: Total.Elm-chan Fatfs High CVSS 7.6 CVE-2026-7517The Custom Payment Gateways for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'alg_wc_cpg_input_fields' parameter in all versions up to, and including, 2.1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is exploitable by unauthenticated guest users submitting a crafted checkout POST request, requiring no custom input fields to be configured in the plugin. High CVSS 7.2 CVE-2026-7829UltraVNC repeater through 1.8.2.2 contains a post-authentication out-of-bounds write in the allow/deny rule parser. In repeater/webgui/settings.c:225-272, after strncpy_s copies a rule token into temp1[rule1] (25-byte destination) or temp2/temp3 (16-byte destination), the code unconditionally writes a NUL terminator at temp1[rule1][len] = 0 without clamping len to the destination size. When an authenticated administrator saves a rule with a token length equal to or greater than the destination size, the NUL byte is written one or more bytes past the end of the stack-allocated array, corrupting adjacent stack data. An attacker who has obtained admin credentials (including via CVE-2026-7839 default password) can trigger this to gain code execution on the repeater host.Uvnc Ultravnc High CVSS 7.2 CVE-2026-7830UltraVNC through 1.8.2.2 uses inadequate cryptography in the MS-Logon II authentication scheme (rfbUltraVNC_MsLogonIIAuth). In rfb/dh.cpp the Diffie-Hellman key exchange is performed with parameters that fit in an unsigned 64-bit integer (DH_MAX_BITS controls the prime size). A 64-bit DH key can be broken by Pollard's rho algorithm in under one second on current hardware. Additionally, the private exponent is generated by the rng() function, which multiplies three libc rand() values seeded from time(NULL). With approximately 31 bits of internal state and a time-based seed, the private exponent is recoverable in under a minute by a passive observer. A network attacker who can observe the MS-Logon II handshake (via sniffing, recording, or man-in-the-middle) can derive the shared DH key and decrypt the encapsulated username and password, resulting in full credential disclosure. This affects legacy MS-Logon II connections; MS-Logon III (X25519 + AES-256-GCM) is unaffected.Uvnc Ultravnc High CVSS 7.4 CVE-2026-7831UltraVNC viewer through 1.8.2.2 contains an off-by-one stack buffer overflow in the RFB ServerInit message handler. In vncviewer/ClientConnection.cpp, when the server-supplied nameLength equals exactly 2024 the code declares a 2024-byte stack buffer _dn[2024] and calls ReadString(_dn, 2024). ReadString writes the NUL terminator at buf[length], i.e., _dn[2024], one byte past the end of the stack buffer. A malicious VNC server can trigger this condition by advertising a desktop name of length 2024 in its ServerInit message. On release builds without stack canaries the single-byte NUL overwrite adjacent stack data. On builds with /GS stack protection the canary is corrupted and the process terminates, resulting in denial of service. User interaction (connecting the viewer to the malicious server) is required.Uvnc Ultravnc High CVSS 7.6 CVE-2026-7838UltraVNC viewer through 1.8.2.2 contains an integer overflow leading to a heap buffer overflow in the RFB protocol failure-response parsing path. In vncviewer/ClientConnection.cpp, the 4-byte network-supplied reasonLen field (type CARD32) is passed as reasonLen+1 to CheckBufferSize(). Because both operands are unsigned 32-bit, a reasonLen of 0xFFFFFFFF overflows to 0, causing CheckBufferSize to allocate only 256 bytes. The subsequent ReadString(m_netbuf, reasonLen) call then performs ReadExact for the original 4 GiB length into that 256-byte heap buffer. This overflow is reachable via rfbConnFailed (auth-scheme negotiation) and rfbVncAuthFailed (post-handshake) message types without successful authentication. A malicious VNC server, or any man-in-the-middle on the RFB stream, can trigger this condition when the victim viewer connects, potentially resulting in remote code execution as the user running the viewer. The crash was confirmed with AddressSanitizer on a portable reproduction harness (heap-buffer-overflow WRITE at offset 256).Uvnc Ultravnc High CVSS 8.8 CVE-2026-7839UltraVNC repeater through 1.8.2.2 initializes the HTTP administration server with a hardcoded default password. In repeater/webgui/settings.c:197, when settings2.txt is absent on first run the repeater writes the literal string "adminadmi2" as the admin password via strcpy_s(saved_password, 64, "adminadmi2"). The HTTP Basic-auth handler wi_decode_auth() checks this password without rate-limiting or lockout. Any remote attacker who can reach the repeater HTTP port (default TCP 80) can authenticate as administrator using the well-known default credential on a fresh or unmodified installation, gaining full control of the repeater configuration including allow/deny rules and session visibility.Uvnc Ultravnc Critical CVSS 9.1 CVE-2026-7840UltraVNC repeater through 1.8.2.2 contains a global buffer overflow in its embedded HTTP administration server. The functions wi_senderr() and wi_replyhdr() in repeater/webgui/webutils.c write the caller-supplied HTTP request URI into a fixed 1000-byte global buffer (hdrbuf) via unchecked sprintf calls. The HTTP receive buffer accepts URIs up to approximately 150 KB (WI_RXBUFSIZE = 153600), so an unauthenticated attacker who can reach the repeater HTTP port (default TCP 80) can overflow hdrbuf by at least 500 bytes with a single HTTP request containing a URI of 1500 bytes or longer, corrupting adjacent .bss-segment globals. The overflow occurs before any authentication check, making it reachable without credentials. A remote, unauthenticated attacker can achieve arbitrary code execution on the host running the repeater.Uvnc Ultravnc Critical CVSS 9.8 CVE-2026-8857A vulnerability in Wikimedia Foundation timeline.
This vulnerability is associated with program files scripts/EasyTimeline.Pl, includes/Timeline.Php.
This issue affects timeline: from * before 1.46.0, 1.45.4, 1.44.6, 1.43.9.Mediawiki High CVSS 8.8 CVE-2025-24815Nokia MantaRay NM is subject to an unrestricted file upload vulnerability due to insufficient file type validation. Successful exploitation could allow an authenticated attacker to upload malicious files onto the system.Nokia Mantaray Nm High CVSS 7.8 CVE-2025-71349picklescan before 0.0.29 fails to detect the built-in trace.Trace.run function when analyzing pickle files, allowing attackers to embed undetected malicious code. Remote attackers can craft malicious pickle files using trace.Trace.run in the reduce method to achieve arbitrary code execution when pickle.load processes the file. High CVSS 8.1 CVE-2025-71350picklescan before 0.0.28 fails to detect malicious pickle files using torch.utils.collect_env.run function in reduce methods. Attackers can embed undetected code in pickle files that executes remote commands when loaded by victims. High CVSS 8.1 CVE-2025-71352picklescan before 0.0.29 fails to detect the built-in Python trace.Trace.runctx function when used in pickle file reduce methods, allowing attackers to execute arbitrary code. Remote attackers can craft malicious pickle files with trace.Trace.runctx payloads that bypass picklescan detection and execute code upon pickle.load() invocation. High CVSS 8.1 CVE-2025-71355Picklescan before 0.0.25 fails to detect unsafe global functions in the Numpy library, allowing attackers to bypass static analysis and execute arbitrary code during deserialization. Attackers can craft malicious pickle files using numpy.testing._private.utils.runstring within the reduce method to import dangerous libraries like os and execute arbitrary OS commands when the pickle file is loaded. High CVSS 7.6 CVE-2025-71363picklescan before 0.0.30 fails to detect cProfile.run function calls in pickle reduce methods, allowing attackers to execute arbitrary code. Remote attackers can craft malicious pickle files with cProfile.run payloads that bypass picklescan detection and achieve code execution upon deserialization. High CVSS 8.1 CVE-2025-71368picklescan before 0.0.30 fails to detect the doctest.debug_script function when analyzing pickle files, allowing attackers to execute arbitrary code. Remote attackers can craft malicious pickle files embedding doctest.debug_script calls that bypass picklescan detection and execute arbitrary commands upon pickle.load invocation. High CVSS 8.1 CVE-2025-71371picklescan before 0.0.29 fails to detect malicious pickle files using code.InteractiveInterpreter.runcode in reduce methods. Attackers can craft pickle payloads that bypass picklescan detection and execute arbitrary code when loaded via pickle.load(). High CVSS 8.1 CVE-2025-71374picklescan before 0.0.29 fails to detect the built-in python profile.Profile.run function when used in pickle reduce methods, allowing attackers to execute arbitrary code. Remote attackers can craft malicious pickle files that bypass picklescan detection and achieve code execution upon deserialization. High CVSS 8.1 CVE-2025-7406Nokia MantaRay NM is vulnerable to a sudo privilege escalation vulnerability where a local attacker possessing administrative (local admin) privileges can escalate to full root privileges on the host. Successful exploitation results in root-level access to the filesystem and the ability to execute actions as root. The risk can be temporarily mitigated by restricting the set of commands permitted via sudo for the affected accounts.Nokia Mantaray Nm High CVSS 7.8 CVE-2026-10109IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to remote code execution due to improper pre-auth DRDA handshake handling.Ibm Db2 Critical CVSS 9.8 CVE-2026-10129IBM Langflow OSS 1.0.0 through 1.9.3 contains a Server-Side Request Forgery (SSRF) protection bypass vulnerability in the API Request component. An authenticated attacker with low-level privileges (flow author role) can bypass SSRF protections by enabling the follow_redirects parameter and supplying a public URL that redirects to internal/localhost addresses. The vulnerability exists because the application validates only the initial URL but does not re-validate redirect destinations. This allows attackers to access internal HTTP services, localhost endpoints, cloud metadata services, and private network resources that should be unreachable when SSRF protection is enabled. Successful exploitation can lead to disclosure of sensitive information including credentials, tokens, internal API responses, and administrative panel data.Langflow High CVSS 8.5 CVE-2026-10134IBM Langflow OSS 1.0.0 through 1.9.3 allows an attacker to read every secret available to the Langflow process, read and modify every flow, conversation, message, file upload, and saved component in the Langflow database, can connect to internal services, abuse cloud metadata endpoints, laterally move to other tenants on the same Langflow instance, and Establish persistence by modifying the public flow's `tool_code` so normal `/api/v1/build/...` calls by any user re-execute attacker code at each build.Langflow Critical CVSS 10 CVE-2026-10140IBM Langflow OSS 1.0.0 through 1.10.0 voice mode contains improper shared-state handling that allows reuse of API clients across tenant boundaries. An authenticated attacker can manipulate cache state to cause requests from other users to be processed using incorrect upstream API credentials, leading to cross-tenant billing and accountability misattribution.Langflow Critical CVSS 9.6 CVE-2026-10513The Webmention plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to and including 5.8.0 via parser-derived 'avatar' and 'url' author metadata. This is due to insufficient input sanitization and output escaping on user-supplied MF2 author properties processed by the unauthenticated webmention REST endpoint and rendered directly into HTML 'value' attributes by the edit-comment-form template without esc_attr() or esc_url(). This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a privileged user (moderator or administrator) opens the affected comment edit screen. High CVSS 7.2 CVE-2026-10560IBM Langflow OSS 1.0.0 through 1.9.6 contains a missing authentication vulnerability in /api/v1/build_public_tmp/ endpoints that allows an unauthenticated attacker to read build event data or cancel jobs using a valid job identifier, resulting in information disclosure and denial of service.Langflow Critical CVSS 9.1 CVE-2026-10564IBM Langflow OSS 1.0.0 through 1.9.6 contains a Server-Side Request Forgery (SSRF). The legacy RSSReaderComponent in rss.py and SearXNG component in searxng.py make unvalidated HTTP requests to user-controlled URLs, bypassing SSRF protections introduced in version 1.9.3. An authenticated attacker can exploit this to access internal resources including cloud metadata services (AWS/Azure/GCP IMDS), potentially exfiltrating IAM credentials and enumerating internal networks. The vulnerability can also be triggered through prompt injection in agentic workflows due to tool_mode=True exposure.Langflow High CVSS 8.2 CVE-2026-10652Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buffer via memcpy without their own bounds check, and pass the result to the application's resolve callback. A malicious or spoofed DNS server, an on-path attacker forging UDP DNS replies, or (with mDNS/LLMNR enabled) any LAN node can craft a truncated TXT or SRV response that causes an out-of-bounds read of adjacent receive-pool memory; the disclosed stale bytes (residual contents of prior DNS packets / uninitialized pool memory) are returned to the application as TXT/SRV record contents, an information leak, and may in some configurations cross the allocation boundary and fault, causing a denial of service. The read is bounded (~64 bytes for TXT, ~6 for SRV) and read-only (no write). The fix rejects any record whose declared rdata extends past dns_msg->msg_size at the single chokepoint in dns_unpack_answer(). Affected: v4.3.0 and v4.4.0.Zephyrproject Zephyr High CVSS 7.4 CVE-2026-10653The Zephyr net_buf library (lib/net_buf/buf.c) manipulated both of its reference counts -- the per-header buf->ref and the per-data-block ref_count at the start of each variable/heap data allocation -- with plain non-atomic C operators (buf->ref++, if (--buf->ref > 0), if (--(*ref_count))).
The API is documented as self-synchronizing: callers may share one buffer across threads (e.g. via k_fifo) and each holder independently calls net_buf_unref() with no surrounding lock. Under true concurrency (SMP, or single-core preemption between the non-atomic load and store while another context unrefs the same buffer), two holders can both observe the same prior reference value and both conclude they are the last reference.
For heap/variable-data pools (mem_pool_data_unref/heap_data_unref, used by zbus message subscribers, the IP stack RX/TX buffers when CONFIG_NET_BUF_FIXED_DATA_SIZE=n, capture, wireguard, ISO-TP and usbip) this produces a double k_heap_free()/k_free() of the same block -- heap-metadata corruption and a use-after-free on the heap-hardening poison pattern.
For the per-header refcount the buffer is returned to the pool free LIFO twice for any pool type (including fixed-data pools used by Bluetooth and networking), corrupting the free list so a later allocation hands the same buffer to two owners.
The fix converts both refcounts to atomic_inc/atomic_dec (overlaying buf->ref in an atomic_t-sized union and changing the data-block refcount from uint8_t to atomic_t).
Impact is gated on genuine concurrency and on an application architecture that shares one buffer among multiple independent unref'ers; the trigger is a refcount/timing race rather than packet content, so an external attacker has at most weak indirect influence over the race window. Affects all Zephyr releases through v4.4.0.Zephyrproject Zephyr High CVSS 8.1 CVE-2026-10763PROMOD V is using insecure HTTP communication instead of HTTPS. The vulnerability is due to the lack of HTTPS support from 3rd party Digipede server. High CVSS 7 CVE-2026-10816Arbitrary File Read (Unauthenticated) in NetScaler ADC and NetScaler Gateway if the access to NSIP, Cluster Management IP or SNIP with management access is enabledCitrix Netscaler Application Delivery Controller High CVSS 7.5 CVE-2026-10817Insufficient input validation leading to memory overread in NetScaler ADC and NetScaler Gateway if the TCP TimeStamp is enabled in TCP Profile and is associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScalerCitrix Netscaler Application Delivery Controller High CVSS 7.5 CVE-2026-11541IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are affected by an HTTP request smuggling vulnerability.Ibm Websphere Application Server Critical CVSS 9.8 CVE-2026-11546IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.7 is affected by a server-side request forgery vulnerability with the adminCenter-1.0 feature enabled.Ibm Websphere Application Server Critical CVSS 9.8 CVE-2026-11589The WP Support Plus Responsive Ticket System WordPress plugin through 9.1.2 does not properly validate uploaded files, allowing unauthenticated users to upload files containing malicious JavaScript (such as HTML or SVG) to a publicly accessible location, leading to Stored Cross-Site Scripting attacks against site users and administrators. High CVSS 8.8 CVE-2026-11590The WP Support Plus Responsive Ticket System WordPress plugin through 9.1.2 does not sanitize user-supplied array keys before using them in a SQL statement, allowing unauthenticated users to perform SQL injection attacks. High CVSS 8.6 CVE-2026-11595IBM WebSphere Application Server 9.0, and 8.5 could allow a remote attacker to obtain sensitive information from the administrative console's integrated help system.Ibm Websphere Application Server High CVSS 7.5 CVE-2026-11708IBM WebSphere Application Server 9.0, and 8.5 is affected by a cross-site scripting vulnerability in the administrative console's integrated help system.Ibm Websphere Application Server Critical CVSS 9.3 CVE-2026-11712IBM WebSphere Application Server 9.0, and 8.5 is affected by a cross-site scripting vulnerability in the administrative console help system.Ibm Websphere Application Server Critical CVSS 9.3 CVE-2026-11714IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.7 is affected by a server-side request forgery vulnerability with the apiDiscovery-1.0 feature enabled.Ibm Websphere Application Server Critical CVSS 9.8 CVE-2026-11806IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 is affected by an arbitrary file read vulnerability with the restConnector-2.0 feature enabled.Ibm Websphere Application Server High CVSS 7.5 CVE-2026-12073The ProfileGrid – User Profiles, Groups and Communities plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 5.9.9.5. This is due to the plugin not validating a `user_login` on registration forms that don't contain this parameter, and not properly handling the error messages. This makes it possible for unauthenticated attackers to change email address of user account with ID=1 (usually an administrator), and leverage that to reset the user's password and gain access to their account. Critical CVSS 9.8 CVE-2026-12076Raytha CMS is vulnerable to SQL Injection within the OData filter parsing pipeline. The vulnerability allows a remote, unauthenticated attacker to execute
arbitrary SQL statements against the underlying PostgreSQL database,
leading to full database compromise, including credential extraction.
Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 1.5.2 but may also affect other versions. Critical CVSS 9.3 CVE-2026-12084IBM UCD - IBM DevOps Deploy 8.1 through 8.1.2.6, and 8.2 through 8.2.1.0 uses Cross-Origin Resource Sharing (CORS) which could allow an attacker to carry out privileged actions and retrieve sensitive information as the domain name is not being limited to only trusted domains.Ibm Devops Deploy High CVSS 7.5 CVE-2026-12240The Export User Data plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the unserialize function in all versions up to, and including, 2.2.6. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). Successful exploitation requires an administrator to trigger a user data export while a subscriber-level (or higher) user has stored a crafted serialized XLSXWriter object payload as their display name. High CVSS 8 CVE-2026-12243NLTK version 3.9.4 is vulnerable to a path traversal attack due to an incomplete fix for GitHub Issue #3504. The `_UNSAFE_NO_PROTOCOL_RE` regex in `nltk/data.py` checks for literal `../` sequences but fails to account for percent-encoded traversal sequences such as `..%2f`. The `url2pathname()` function decodes these sequences after the validation step, allowing an attacker to bypass the protection. This vulnerability enables an attacker to read arbitrary files accessible to the Python process by controlling the resource name parameter passed to `nltk.data.load()` or `nltk.data.find()`. The issue affects applications that rely on NLTK for resource loading, including NLP web applications, Jupyter notebooks, and CLI tools. The default `pathsec.ENFORCE=False` setting exacerbates the impact by not blocking the file read at the `open()` stage.Nltk High CVSS 7.5 CVE-2026-12578The affected product is vulnerable to a deserialization of untrusted data, which may allow an attacker to execute arbitrary code. High CVSS 8.4 CVE-2026-12818Delta Electronics DVP12SE PLCs are susceptible to a resource allocation vulnerability without limits or throttling (CWE-770) within their Modbus TCP service. Critical CVSS 9.3 CVE-2026-12819Delta Electronics DVP12SE PLC exposes a Modbus TCP service over a specified port without authentication or access control, permitting unauthenticated interaction with security-sensitive PLC functions. Critical CVSS 9.3 CVE-2026-13149brace-expansion through 5.0.6 is vulnerable to denial of service. The expand() function exhibits exponential-time complexity in the number of consecutive non-expanding '{}' brace groups. An attacker who passes a crafted string to expand(), directly or transitively, can cause significant CPU consumption and event-loop blocking. The max option does not mitigate this, as it bounds the output size rather than the recursion work. High CVSS 7.7 CVE-2026-13207FUXA versions 1.3.1 and prior contain an authentication bypass vulnerability via dot-segment path normalization in the REST API. The API router fails to normalize dot-segment sequences before applying authentication middleware, allowing unauthenticated requests to access protected endpoints by prefixing paths with dot-segments such as /api/./users, /api/./roles, and /api/project/../users. These requests bypass authentication checks and return sensitive user and role data without credentials. High CVSS 7.5 CVE-2026-13449IBM Business Automation Manager Open Editions 9.0.0 through 9.4.2 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources.Ibm Business Automation Manager Critical CVSS 9.1 CVE-2026-13474Denial of service via malformed HTTP/2 requests in NetScaler ADC and NetScaler Gateway if HTTP/2 is enabled in HTTP Profile and associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScalerCitrix Netscaler Application Delivery Controller High CVSS 7.5 CVE-2026-13759IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 ships three ObjectInputStream subclasses (WsObjectInputStream, ObjectStreamPool$ReusableInputStream, ObjectInputStreamResolver) that install no JEP-290 class filter; when Coherence is on the classpath, multiple RCE gadget chains including RemoteConstructor.readResolve and PriorityQueue/ExtractorComparator are confirmed working, allowing a post-login attacker who can write a session attribute or a LAN-adjacent attacker on the grid replication wire to execute arbitrary code on peer WAS JVMsIbm Websphere Extreme Scale High CVSS 8.8 CVE-2026-13766DBIx::QuickORM versions before 0.000026 for Perl allow SQL injection via unquoted SQL identifiers.
The default SQL builder, a SQL::Abstract subclass, sets bindtype in its constructor but never quote_char, so SQL::Abstract emits identifiers verbatim. Caller-supplied identifiers (order_by, where-clause column keys, field and returning lists, upsert columns, and join aliases) reach the SQL string raw, while values are placeholder-bound and unaffected.
A caller that forwards untrusted input to an affected identifier position, such as a user-controlled order_by value, enables SQL injection: the row order can be made to depend on a sub-select over columns the query never selected, and the where and update identifier positions permit further data disclosure and tampering. Critical CVSS 9.8 CVE-2026-13772IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 's Object Query Language engine resolves attacker-supplied class names via Class.forName() and invokes their constructors with no allow-list at three distinct sinks (SELECT NEW, enum literals, and reflection-based comparators); an authenticated remote attacker who can influence an application-built OQL query string can execute arbitrary constructors on the WAS JVM, and a SELECT DISTINCT variant using planted grid values fires the same gadget post-readObject in a manner that survives JEP-290 serialization filters across grid node boundariesIbm Websphere Extreme Scale Critical CVSS 9.9 CVE-2026-13773IBM WebSphere Extreme Scale 8.6.1.0 through 8.6.1.6 Approximately 50 generated CORBA stub classes in WebSphere eXtreme Scale's ogclient.jar call ORB.string_to_object() on an attacker-controlled IOR string during Java deserialization, turning any unfiltered ObjectInputStream sink in WAS into outbound IIOP SSRF to an attacker-chosen host; when chained with the IBM ORB's getUserException class-instantiation flaw (WAS-26), this SSRF escalates to remote code execution on the calling JVM.Ibm Websphere Extreme Scale Critical CVSS 10 CVE-2026-13774Use after free in Extensions in Google Chrome prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: Critical)Google Chrome High CVSS 8.1 CVE-2026-13775Use after free in GPU in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)Google Chrome Critical CVSS 9.8 CVE-2026-13776Type Confusion in Dawn in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)Google Chrome Critical CVSS 9.8 CVE-2026-13777Insufficient validation of untrusted input in iOSWeb in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical)Google Chrome High CVSS 8.8 CVE-2026-13778Use after free in WebUSB in Google Chrome on Mac prior to 150.0.7871.47 allowed a local attacker to execute arbitrary code via a malicious peripheral. (Chromium security severity: Critical)Google Chrome High CVSS 7.8 CVE-2026-13779Use after free in Chromoting in Google Chrome on ChromeOS prior to 150.0.7871.47 allowed a remote attacker to execute arbitrary code via malicious network traffic. (Chromium security severity: Critical)Google Chrome High CVSS 8.1 CVE-2026-13780Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)Google Chrome Critical CVSS 9.6 CVE-2026-13781Insufficient validation of untrusted input in Skia in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)Google Chrome Critical CVSS 9.6 CVE-2026-13782Use after free in Browser in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)Google Chrome Critical CVSS 10 4701–4800 / 5155 CVE