cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-2395Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Xpoda Türkiye Informatics Technology Inc. No Code Platform allows SQL Injection.
This issue affects No Code Platform: from 4.3.1.0 through 20260722. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. Critical CVSS 9.8 CVE-2026-32665In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, when downstream DNS-over-QUIC (DoQ) is enabled, the first two bidirectional streams on a new QUIC connection (stream_id 0 and 4) bypass the per-stream 'quic-size' gate entirely, and large input buffers are allocated later, after only the 2-byte length prefix has been received from the initial streams. As a result, a remote client can make Unbound exceed the configured 'quic-size' limit with low-cost input. Using only one connection and two streams, each sending a declared 65535-byte length prefix and then holding the streams open, a client can already trivially make Unbound roughly allocate double that amount. This is a remote availability issue / memory-accounting bypass in the downstream DoQ implementation that leads to denial of service for new DoQ clients. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces.Nlnetlabs Unbound High CVSS 7.5 CVE-2026-3821Supermicro (SMC) SMASH services contain an Arbitrary code execution issue in X14DBG-DAP and X14DBI.
An authorized attacker can exploit SMASH’s input capability to compromise data integrity or launch a Denial-of-Service (DoS) attack against the BMC.NVD analysis in progress High CVSS 8.8 CVE-2026-38765An issue in Unistal Systems Pvt. Ltd.Protegent 360 v2.0.0.4 allows a local attacker to escalate privileges via the kernel driver pgsecdl.sys High CVSS 7.8 CVE-2026-38766An issue in Unistal Systems Pvt. Ltd.Protegent 360 v2.0.0.4 allows a local attacker to escalate privileges via the sub_186f4 function High CVSS 7.8 CVE-2026-40691In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces.Nlnetlabs Unbound High CVSS 7.5 CVE-2026-40712Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) an Improper Input Validation vulnerability in the REST API. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges.NVD analysis in progress Critical CVSS 9.1 CVE-2026-40714Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) an Improper Input Validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges.NVD analysis in progress High CVSS 7.2 CVE-2026-44189A flaw was found in the Visual Studio Code Ansible Lightspeed extension's AnsiblePlaybookRunProvider. This command injection vulnerability allows an attacker to craft a malicious playbook filename containing special characters. When a victim runs the playbook, these characters are not properly sanitized, leading to the execution of arbitrary code with the privileges of the user running VS Code. This could result in a full system compromise, including the exfiltration of sensitive data, modification of project files, and permanent data loss.NVD analysis in progress High CVSS 7.8 CVE-2026-44190A flaw was found in the Ansible Lightspeed Visual Studio Code extension. This Command Injection vulnerability (CWE-78) allows a remote attacker to execute unauthorized commands on a user's system. The issue occurs because the `ansible.python.activationScript` setting, intended for a virtual environment activation script, does not properly validate user input as a file path. If a user opens or executes a specially crafted project, an attacker could exploit this to gain complete control over the user's system with the privileges of the Visual Studio Code application.NVD analysis in progress High CVSS 7.8 CVE-2026-44191A flaw was found in the Visual Studio Code Ansible Lightspeed extension. This command injection vulnerability (CWE-78) arises from improper handling of the ansible.executionEnvironment.containerOptions and ansible.executionEnvironment.volumeMounts settings, allowing an attacker to inject shell separators. This can be triggered automatically during Language Server initialization or manually when executing a playbook. Successful exploitation leads to remote code execution (RCE) on the victim's machine with the privileges of the Visual Studio Code user, potentially resulting in a complete system compromise.NVD analysis in progress High CVSS 7.8 CVE-2026-44690In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, insufficient validation of the RRSIG.Labels field combined with premature cache writes during RFC 8198 aggressive NSEC processing leads to cache poisoning that permits a malicious actor controlling a single delegated zone to poison arbitrary sibling zones under NSEC-signed parent domains. A malicious actor with one registered domain under an NSEC-signed TLD can serve malicious insecure DNS responses for unrelated sibling domains (sharing the same parent zone). Arbitrary delegations that do not exist under the parent domain and are covered by the parent's NSEC chain can be brought into insecure existence by fraudulent wildcard DS records (less labels than expected, unknown algorithm) from the malicious sibling domain. This allows the malicious actor to inject insecure wildcard records for those delegations.Nlnetlabs Unbound High CVSS 7.5 CVE-2026-46738Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) an Improper Input Validation vulnerability in the REST API. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges.NVD analysis in progress Critical CVSS 9.1 CVE-2026-4773Improper validation of specified type of input vulnerability in Magarsus Consulting Ltd. Co. IDM-MFA allows Authentication Bypass.
This issue affects IDM-MFA: from 2025.11.27 before 2026.03.10. High CVSS 8.1 CVE-2026-48029libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.19.0 through 1.21.2 have a heap OOB read in ImageItem_Grid::decode_grid_tile via irot-induced tile-coordinate underflow. Version 1.22.0 fixes the issue.NVD analysis in progress High CVSS 7.1 CVE-2026-49499Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) a Generation of Incorrect Security Tokens vulnerability in the IAM. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges.NVD analysis in progress High CVSS 8.8 CVE-2026-50252In NLnet Labs Unbound 1.4.22 up to and including 1.25.1, UDP source port is randomized and intended to serve as a secret value that increases the entropy of DNS transactions. When resolver load balancing policies depend on the source port while their outcome is revealed this secrecy is undermined. The vulnerability arises when the load balancing policy is consistent with respect to the incoming source UDP port and IP address while heavily depending on the incoming source UDP port as a randomization source. When the SO_REUSEPORT configuration option is enabled ('so-reuseport: yes') in Unbound (by default), it meets these conditions, making it vulnerable for DNS cache poisoning attacks. Upon startup, Unbound randomly partitions the available UDP source port space into disjoint subsets of (almost) equal size, assigning each subset to a specific worker thread. When an incoming DNS query is received, the kernel’s SO_REUSEPORT load balancing mechanism deterministically assigns the query to a socket associated with a particular thread. All outgoing DNS queries generated during the resolution of that request use source ports selected exclusively from the port subset assigned to the corresponding thread. Since these port subsets are disjoint across threads, the source port observed in a resolver’s outgoing query to an authoritative name server serves as a reliable indicator of the worker thread that processed the original client query. A malicious actor can acquire the mapping between incoming UDP source ports (for a given fixed source IP address) and Unbound worker threads and leverage it to conduct DNS cache poisoning attacks by effectively lowering the random port population per thread.Nlnetlabs Unbound Critical CVSS 9.3 CVE-2026-50522Deserialization of untrusted data in Microsoft Office SharePoint allows an unauthorized attacker to execute code over a network.Microsoft SharePoint Critical CVSS 9.8 CVE-2026-55973In NLnet Labs Unbound 1.23.0 up to and including 1.25.1, when 'dns-error-reporting: yes' is set, the EDNS Report-Channel option (code 18) from the last upstream response is read and uses the option's length as the length of the agent domain. When a domain name check is performed on the agent domain, the returned lenght is not used and if the agent domain is followed by garbage, those bytes are moved onto the tail of the synthetic '_er.' report query name. That query name is later used in the iterator via a subquery to send out the DNS Error Report and when Unbound tries to walk that query name during 'find_closest_of_type()', it strips labels using the query name length rather than stopping at the embedded root, walks one byte past it, and feeds the first garbage byte to 'dname_query_hash()' as a label length writing over the stack variable 'labuf'. One ordinary upstream response from a delegated zone the attacker controls is sufficient to terminate the daemon.Nlnetlabs Unbound High CVSS 7.5 CVE-2026-56844A vulnerability in the Veeam Updater component of the Veeam Software Appliance that could allow a local user to elevate their privileges and gain root-level access to the underlying operating system.NVD analysis in progress High CVSS 8.4 CVE-2026-57600Insufficient validation of input parameters in the firmware of some Hikvision cameras allows unauthenticated attackers to retrieve partial sensitive data. High CVSS 7.5 CVE-2026-60366Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Platform Security for Java. While the vulnerability is in Oracle Platform Security for Java, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H).Oracle Platform Security For Java Critical CVSS 10 CVE-2026-60367Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java Critical CVSS 9.8 CVE-2026-60368Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SOAP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8.8 CVE-2026-60369Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. While the vulnerability is in Oracle Platform Security for Java, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 9.9 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H).Oracle Platform Security For Java Critical CVSS 9.9 CVE-2026-60370Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 7.5 CVE-2026-60371Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with access to the physical communication segment attached to the hardware where the Oracle Platform Security for Java executes to compromise Oracle Platform Security for Java. While the vulnerability is in Oracle Platform Security for Java, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8 CVE-2026-60372Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java Critical CVSS 9.8 CVE-2026-60373Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8.8 CVE-2026-60439Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8.8 CVE-2026-60455Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8.8 CVE-2026-61246Vulnerability in the Oracle Platform Security for Java product of Oracle Fusion Middleware (component: Centralized Thirdparty Jars). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Platform Security for Java. Successful attacks of this vulnerability can result in takeover of Oracle Platform Security for Java. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).Oracle Platform Security For Java High CVSS 8.8 CVE-2026-61390There is a heap buffer overflow vulnerability in some Hikvision cameras, which may allow unauthenticated attackers to cause device malfunction by sending specially crafted packets. High CVSS 7.7 CVE-2026-61391There is a stack-based buffer overflow vulnerability in some Hikvision cameras, which may allow authenticated attackers to cause device malfunction by sending specially crafted packets. High CVSS 7.2 CVE-2026-62144An authentication bypass vulnerability in Check Point Security Management and Multi-Domain Security Management allows an unauthenticated remote attacker to execute administrative commands on the Management Server. Successful exploitation may also allow command execution on managed Security Gateways. Exploitation requires network access to the Management Server without firewall protection or a configuration that does not restrict Trusted Clients.NVD analysis in progress Critical CVSS 9.1 CVE-2026-62145A vulnerability in Check Point Gaia Portal allows an authenticated attacker with read-only Gaia Portal privileges to execute commands with root privileges.NVD analysis in progress High CVSS 7.5 CVE-2026-63047Joomla Extension - joomdonation.com - Invoice data exfiltration via incorrect ACL check in Events Booking 5.0.0-5.8.1 - The Joomla extension Events Booking prior version 5.0-5.8.1 did not properly verify that an actor is allowed to download invoice information. High CVSS 7.5 CVE-2026-63048Joomla Extension - joomlack.fr - Improper access control in Page Builder CK < 3.6.2 - The Joomla extension Page Builder CK is vulnerable to an authenticated arbitrary file upload, leading to RCE. Critical CVSS 9.4 CVE-2026-63265Joomla Extension - regularlabs.com - Inconsistent CSRF token checks / privilege checks in various Regular Labs extension AJAX endpoints - Privileged Regular Labs AJAX endpoints did not consistently require valid CSRF tokens, matching component/item permissions and trusted server-generated form configuration. Authenticated lower-privileged users or CSRF attacks could invoke lookups or mutations outside their authorization. High CVSS 8 CVE-2026-63280Joomla Extension - regularlabs.com - Inconsistent CSRF token checks / privilege checks in Regular Labs conditions manager - Conditions administration did not consistently enforce tokens and component/mapped-item permissions. High CVSS 8.8 CVE-2026-63683Joomla Extension - regularlabs.com - Client IP spoofing vulnerability in Regular Labs conditions manager - IP and GeoIP conditions trusted spoofable forwarded headers, allowing remote clients to bypass location-based rules. High CVSS 7.5 CVE-2026-63684Joomla Extension - regularlabs.com - Inconsistent CSRF token checks / privilege checks in various admin/import/export actions of multiple Regular Labs extension - Administrator actions, editor popups and import/export requests lacked consistent token, item-permission and input-validation checks. Unauthorized backend users or CSRF attacks could expose, create or modify extension configuration and items. High CVSS 8.8 CVE-2026-63685Joomla Extension - regularlabs.com - Authorization bypass in DB Replacer extension - Administrator routes and replacement requests did not consistently require Super User permission and a valid token. An unauthorized backend user or CSRF attack could perform database replacements, potentially causing major data corruption or site compromise. High CVSS 8.8 CVE-2026-64791Joomla Extension - regularlabs.com - Inconsistent CSRF token checks / privilege checks in Regular Labs Extension Manager - Administrator routes and install/update/uninstall processing did not consistently enforce component-management and installation permissions. An unauthorized backend user or CSRF attack could install, update or remove extensions. High CVSS 8.8 CVE-2026-64792Joomla Extension - regularlabs.com - disclosure of restricted content via search index in various Regular Labs extensions - Smart Search indexing could render generated content using the indexing administrator’s identity instead of a public guest. Restricted or administrator-only content could consequently be stored in the public search index and disclosed to visitors. High CVSS 7.5 CVE-2026-64793Joomla Extension - regularlabs.com - Content access and publication bypass in Articles Anywhere and Modules Anywhere extensions - Content tags could use ignore flags or property overrides to render restricted or unpublished articles or modules. A content author could thereby expose content to visitors who lacked the required access. Critical CVSS 9.1 CVE-2026-64796Joomla Extension - regularlabs.com - various code injection vectors in Sourcerer extension - Free did not require both the article creator and last modifier to be Super Users before executing article PHP. Pro did not consistently enforce configured CSS, JavaScript and PHP permissions across tags, attributes, files and both article owners. PHP include attributes could also escape the configured include folder, and executable script/style variants could bypass detection. Critical CVSS 9.8 CVE-2026-64798Joomla Extension - regularlabs.com - Insecure login URL keys in IP login extension - Persistent URL login keys were also generated using a non-cryptographic random generator with insufficient entropy. Critical CVSS 9.1 CVE-2026-64829Question2Answer through 1.8.8 contains a session invalidation vulnerability that allows attackers with a previously obtained remember-me cookie to retain authenticated access by exploiting the forgot-password reset flow's failure to clear the sessioncode field in qa-include/app/users-edit.php. While the normal password-change flow in qa-include/pages/account.php explicitly clears the sessioncode to invalidate persistent qa_session cookies, the forgot-password handler qa_finish_reset_user() omits this step, allowing any valid persistent cookie issued before the reset to continue authenticating the account after the password reset completes. High CVSS 7.4 CVE-2026-64830FFmpeg versions 2.1 through 8.1.2 contains a heap buffer overflow vulnerability in the VobSub subtitle demuxer that allows attackers to corrupt adjacent heap memory by supplying a malicious .sub/.idx subtitle file declaring more distinct stream IDs than the fixed-size array bounds in libavformat/mpeg.c. Attackers can craft a subtitle file with excessive distinct stream IDs to trigger unbounded writes beyond the vobsub->q[] array boundary via ff_subtitles_queue_insert(), potentially achieving arbitrary code execution in any application using FFmpeg's VobSub demuxer.NVD analysis in progress High CVSS 8.8 CVE-2026-64831FFmpeg versions 8.0 through 8.1.2 contains a stack buffer overflow vulnerability in the Vulkan HEVC hardware decoder that allows remote attackers to overwrite return addresses and adjacent stack frames by supplying a crafted HEVC/H.265 bitstream. Attackers can embed a malicious vps_num_hrd_parameters value exceeding HEVC_MAX_SUB_LAYERS in any supported container format to overflow stack-allocated arrays in the vk_hevc_end_frame function, potentially achieving arbitrary code execution.NVD analysis in progress High CVSS 8.8 CVE-2026-64832FFmpeg versions 4.4 through 8.1.2 contain a double-free vulnerability in the NVIDIA NVDEC hardware decoder within libavcodec/nvdec.c that allows attackers to trigger memory corruption by supplying a crafted video file. When no decoder surfaces remain, the ff_nvdec_start_frame_sep_ref error path frees memory via nvdec_fdd_priv_free while the calling layer subsequently frees the same frame description data, resulting in a double-free of the underlying decoder context in any FFmpeg-based application using NVDEC hardware-accelerated decoding.NVD analysis in progress High CVSS 8.8 CVE-2026-64833FFmpeg versions 0.7.1 through 8.1.2 contain an out-of-bounds read vulnerability in the S/PDIF muxer that allows attackers to access memory beyond buffer boundaries by supplying a crafted DTS stream with a core_size value larger than the actual packet length. Attackers can exploit the missing bounds check in the spdif_header_dts4 function by providing a malicious DTS-HD audio stream during S/PDIF re-muxing to trigger unauthorized memory reads beyond the packet buffer.NVD analysis in progress High CVSS 7.1 CVE-2026-64834FFmpeg versions 0.6.3 through 8.1.2 contain an infinite loop vulnerability in the RTP/ASF demuxer within libavformat/rtpdec_asf.c that allows remote attackers to cause denial of service by sending a crafted RTP/ASF stream. The rtp_asf_fix_header function fails to validate a minimum chunksize when iterating over ASF objects, causing the loop pointer to never advance when a chunksize is smaller than the 24-byte minimum ASF object header size, resulting in CPU exhaustion that denies service to legitimate users.NVD analysis in progress High CVSS 7.5 CVE-2026-64835FFmpeg versions 4.4 through 8.1.2 contain an out-of-bounds memory access vulnerability in the ADX audio decoder within libavcodec/adxdec.c that allows attackers to trigger both out-of-bounds reads and writes by supplying a crafted ADX or AAX audio file with a mid-stream channel layout change. When AV_PKT_DATA_NEW_EXTRADATA side data is received mid-stream, the adx_decode_frame function re-parses the stream header but fails to update the internal channel state, causing subsequent decoding operations to access the prev[] state array using a stale channel count.NVD analysis in progress High CVSS 8.8 CVE-2026-65013Onlook through 0.2.32, fixed in commit 423e2e9, contains a broken object level authorization vulnerability that allows authenticated attackers to access and manipulate other users' resources by supplying arbitrary UUID values to tRPC API procedures including project.get, member.remove, and chat.conversation.delete. Attackers can provide arbitrary projectId or conversationId values without authorization validation to read, modify, and delete other users' project data, members, and conversation history. High CVSS 8.8 CVE-2026-65015n8n versions before 2.30.1 contain a privilege escalation vulnerability in the AI Agents feature where the node-execution tool lacks proper authorization checks. A Project Viewer user can escalate privileges by chatting with an agent that has node tools enabled, executing arbitrary nodes and accessing credential secrets without proper authorization verification.N8n High CVSS 8.8 CVE-2026-65016n8n versions before 1.123.64, 2.29.8, and 2.30.1 contain a privilege escalation vulnerability in Enterprise SSO instance-role provisioning. The provisioning path maps an IdP-asserted role claim to an n8n global role but does not prevent assignment of the global:owner role (unlike the token-exchange identity path, which rejects it). An SSO-authenticated user whose instance-role claim resolves to global:owner is provisioned as instance owner, gaining full administrative control over workflows, credentials, users, and instance configuration. Exploitation requires that Enterprise SSO is configured, instance-role provisioning is enabled via N8N_SSO_SCOPES_PROVISION_INSTANCE_ROLE (disabled by default), and the attacker controls the instance-role claim value issued by the IdP.N8n High CVSS 8.8 CVE-2026-65590n8n before 2.29.8 and 2.30.x before 2.30.1 does not enforce shell sandbox restrictions on Linux and Windows in the @n8n/computer-use package (sandboxing was applied only on macOS). Shell commands executed by the tool run without any filesystem or network restrictions, allowing unrestricted access to the host filesystem and network from within the computer-use agent process. This issue only affects deployments where the @n8n/computer-use package is explicitly installed and running; standard n8n installations are not affected.N8n Critical CVSS 9.8 CVE-2026-65591n8n contains a sanitizer bypass vulnerability in the legacy expression evaluator's computed-member handler. An authenticated user with workflow create or modify permissions can craft a malicious expression to bypass the sanitizer and achieve host-level code execution as the n8n process. The legacy expression engine is the default in affected versions. Fixed in n8n 1.123.64, 2.29.8, and 2.30.1.N8n High CVSS 8.8 CVE-2026-65595n8n before 2.30.1 and 2.29.8 assigns all Public API key scopes to JWTs issued through the Token Exchange module regardless of the acting user's role. On instances where the Token Exchange feature and Public API are enabled, a low-privileged user who can obtain a valid external JWT trusted by a configured issuer can use the resulting access token to invoke administrator-only Public API operations such as role escalation, user creation, and user deletion (role escalation requires an Advanced Permissions license), and, when unverified Community Package installation is enabled, achieve remote code execution.N8n High CVSS 8.8 CVE-2026-65596n8n before 1.123.64, 2.29.8, and 2.30.1 fails to enforce the "Allowed HTTP Request Domains" restriction on HTTP-based credentials (Header Auth, Basic Auth, Query Auth, OAuth) in the GraphQL node, unlike the HTTP Request node. An authenticated user able to create or edit workflows can point the node's endpoint at a server they control and exfiltrate restricted credentials. Only instances where a credential has "Allowed HTTP Request Domains" configured and is usable by non-owner users are affected.N8n High CVSS 8.1 CVE-2026-65598n8n before 1.123.64, 2.29.8, and 2.30.1 contains a TOCTOU race condition in the Git node's clone operation that allows authenticated users to bypass path restrictions by swapping a directory for a symlink after the path is validated but before the clone runs. This lets an attacker plant a crafted repository in the community node directory, which n8n loads as a custom node on the next restart, executing arbitrary JavaScript on the server. Both self-hosted and cloud instances are affected.N8n High CVSS 7.5 CVE-2026-65600Traefik versions <= v2.11.51, >= v3.6.0 <= v3.6.22, and >= v3.7.0 <= v3.7.6 contain an authentication bypass via path traversal in the ReplacePathRegex middleware. When ReplacePathRegex is configured with a regex that captures user-controlled path segments without a mandatory path separator (e.g. regex "^/api(.*)", replacement "/$1"), the middleware forwards the replaced path to the backend without validating that it matches its normalized form. An unauthenticated remote attacker can send a crafted request (e.g. GET /api../admin) that produces an un-normalized path such as /../admin, which a backend that normalizes paths resolves to a protected route, bypassing authentication middleware. Fixed in v2.11.52, v3.6.23, and v3.7.7.NVD analysis in progress High CVSS 7.8 CVE-2026-65603The Grav Login plugin (grav-plugin-login) versions <= 3.8.11 contain a privilege escalation flaw in the authenticated profile self-update handler (processUserProfile(), the update_user task). Unlike the registration handler, this handler does not strip privilege fields ('groups','access') from user-submitted form data before persisting them. When an administrator has added 'groups' and/or 'access' to plugins.login.user_registration.fields and the default 'regular'/DataUser account backend is in use, a low-privilege authenticated user can POST crafted profile form data (e.g. access[admin][super]=true) to escalate to super-admin, enabling admin panel access, scheduler abuse (RCE), and Twig evaluation. Fixed in 3.8.12.NVD analysis in progress High CVSS 8.8 CVE-2026-8152Unblu Spark contains an open redirect vulnerability that can be escalated to a DOM-based cross-site scripting (XSS) attack.
When Unblu Spark is deployed with com.unblu.identifier.siteEmbeddedSetup=true, it runs in the same origin as the host application. Any JavaScript injected through this vulnerability therefore executes with full access to the host application's cookies, DOM, and same-origin APIs — an attacker can reach all resources of the host application, not just Unblu's. This expanded blast radius is the reason on-premises deployments using this configuration are rated CRITICAL. Critical CVSS 9.3 CVE-2016-20096Linknat VOS3000 and VOS2009 through version 2.1.2.0 contain an unauthenticated SQL injection vulnerability that allows remote attackers to execute arbitrary SQL commands by manipulating the name parameter in a POST request to the login endpoint. Attackers can inject malicious SQL through the login form and retrieve injected query results from a subsequent session request, enabling extraction of plaintext credentials and other database content with DBA-level privileges. Critical CVSS 9.8 CVE-2021-27137An issue was discovered in router/upnp/src/ssdp.c in DD-WRT before 45724. An unsafe strcpy in the UPnP handling functionality allows an unauthenticated remote attacker to send a request that would overflow an internal fixed buffer. Exploitation requires the DD-WRT user to enable UPnP (which is off by default, and only listens on internal interfaces by default). This occurs in ssdp_msearch (reachable by an M-SEARCH request).DD-WRT Critical CVSS 8.1 CVE-2025-66390In Microsoft Azure API Management through 2025-10-17, when self-service signup (username/password Basic Authentication) is enabled in Tenant A, an attacker can reuse the registration flow by changing the hostname or tenant identifier to Tenant B, even when Tenant B has signup disabled at the UI level. In other words, disabling signup in the UI does not disable the underlying API endpoint (which still accepts cross-tenant requests based on the Host header). NOTE: The supplier states that they evaluated the report and determined it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation). NOTE: The supplier evaluated this report and determined that it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation).NVD analysis in progress Critical CVSS 9.8 CVE-2026-0770Langflow Inclusion of Functionality from Untrusted Control Sphere VulnerabilityLangflow Critical CVE-2026-10678The MCTP-over-I2C+GPIO target binding in Zephyr (subsys/pmci/mctp/mctp_i2c_gpio_target.c) processes pseudo-register writes from an I2C bus master byte-by-byte in mctp_i2c_gpio_target_write_received() without validating the order or the receive buffer. In the affected versions the MCTP_I2C_GPIO_RX_MSG_ADDR (data) handler dereferences and writes through b->rx_pkt without checking that the receive buffer was allocated: a controller that selects the data register and writes a byte without first sending the length register (which is what allocates the buffer) causes a write of an attacker-chosen byte through a NULL/unallocated mctp_pktbuf pointer (i.e. into a small attacker-advanceable offset above address 0), producing memory corruption or a hard fault.
The same handler also performs a write-then-check bounds test, allowing a one-byte heap overflow at data[255] when more than 255 data bytes are sent.
Because the I2C target callback is invoked with raw bytes supplied by whatever device is the bus master and the binding performs no authentication, a malicious or malfunctioning controller on the bus can trigger these without any prior protocol state, leading to memory corruption and/or denial of service on the target device.
The vulnerable code was introduced when the I2C+GPIO target binding was added and shipped in Zephyr v4.3.0 and v4.4.0. The fix defers allocation to the first data byte with a NULL check, treats a missing length as a zero-sized packet rejected by libmctp, and moves the bounds check before the store.NVD analysis in progress High CVSS 8.1 CVE-2026-10680The Classic (BR/EDR) L2CAP signaling handlers l2cap_br_conf_req() and l2cap_br_conf_rsp() in subsys/bluetooth/host/classic/l2cap_br.c validated the minimum command size against buf->len (the bytes remaining in the whole received PDU) instead of len (the per-command data length from the L2CAP signaling header). Because multiple signaling commands can be packed into one PDU, buf->len may exceed a command's len. An attacker can send a CONF_REQ command with a header length smaller than the configuration-request structure (e.g. 0), followed by another command so that buf->len still satisfies the check. The check then passes incorrectly and opt_len = len - sizeof(*req) underflows the uint16_t to a near-0xFFFF value. The configuration-option loop, which lacks an opt_len-versus-buf->len guard, then walks far past the end of the pooled ACL receive buffer using net_buf pull primitives that perform no runtime bounds check, producing an out-of-bounds read of host memory and, when the out-of-bounds option bytes encode an MTU or flush-timeout option, an out-of-bounds write. The BR/EDR signaling channel is processed before pairing/encryption and an L2CAP channel to an L0 service such as SDP can be opened without pairing, so an unauthenticated peer within radio range that can establish an ACL connection can trigger the flaw, leading to memory corruption and denial of service (host/device crash). The defect is present in released versions including v4.4.0. The fix validates against len instead of buf->len in both handlers.NVD analysis in progress High CVSS 7.6 CVE-2026-11767The Free Builder for Elementor WordPress plugin before 1.6.7 does not sanitise submitted contact form field values before storing them and outputting them in the admin dashboard, allowing unauthenticated attackers to perform Stored Cross-Site Scripting attacks that execute when a logged-in administrator views the form submissions. High CVSS 8.8 CVE-2026-13439The Easy Form Builder by WhiteStudio plugin for WordPress is vulnerable to Unauthenticated Privilege Escalation to Administrator in versions up to, and including, 4.0.11 This is due to the password recovery flow using the publicly-visible session identifier ('sid') as the password reset token stored in wp_emsfb_temp_links, combined with a publicly-accessible nonce refresh endpoint (Emsfb/v1/nonce/refresh) that issues valid WordPress REST nonces to unauthenticated visitors. This makes it possible for unauthenticated attackers to reset the password of any WordPress user — including administrators — by scraping the public sid from a published login form page, submitting a recovery request for any known user email via Emsfb/v1/forms/message/add, and then calling Emsfb/v1/forms/recovery/efb_set_password with the known sid to set an arbitrary new password and gain full administrator access. Critical CVSS 9.8 CVE-2026-15226A sandbox confinement bypass vulnerability exists in Canonical snapd within its internal execution environment compiler (snap-confine). The default seccomp security templates generated by the engine to restrict system calls do not filter or reject process operations capable of creating or manipulating file execution flags with set-user-ID attributes. Consequently, an application running within a strictly confined snap environment can successfully compile or drop binaries and apply setuid properties to them. If a compromised or malicious process inside the snap sandbox executes these generated setuid binaries, it can potentially circumvent architectural sandboxing assumptions, drop intended restriction policies, or execute privileged actions inside the container namespace that should otherwise be strictly blocked. The vulnerability has been resolved by hardening the seccomp template engine to block the execution and creation of setuid executables by sandboxed snap processes.NVD analysis in progress High CVSS 8.4 CVE-2026-15432When verifying a mac with a ChunkedMacVerification object, Tink compares the resulting tag with non constant time comparison. This potentially allows an attacker to use timinig information as a side channel in order to get information how many bytes of a given tag match the correct tag. This in turn could allow to find a correct tag bytewise.NVD analysis in progress High CVSS 8.2 CVE-2026-15724In Progress ShareFile Storage Zones Controller versions prior to 5.12.5 and 6.0.2, an authenticated administrative user can exploit a path traversal vulnerability to read arbitrary files from the server filesystem, write files to arbitrary directories, or determine whether specific files exist on the server.NVD analysis in progress High CVSS 8.7 CVE-2026-15793BuildKit custom frontends or clients using the raw low-level API can set git.checkoutbundle=true when checking out Git sources. If the Git source is malicious, this could lead to a crafted command invocation on the host.NVD analysis in progress High CVSS 7.3 CVE-2026-15829A SQL injection (CWE-89) and security boundary bypass (CWE-863) vulnerability exists in the prebuilt BigQuery forecasting tool (bigquery-forecast) of googleapis/mcp-toolbox.
The tool accepts client-controlled parameters (data_col, timestamp_col, and id_cols) as plain strings and interpolates them unescaped via fmt.Sprintf directly into a generated AI.FORECAST table-valued SELECT statement. While MCP Toolbox utilizes an allowedDatasets mechanism to restrict queries, this defense only validates the history_data parameter; the final assembled query is executed without re-validation.
An attacker can break out of the string literal fields (such as timestamp_col) to inject a valid multi-statement or cross-dataset query block. This allows an unauthorized user to bypass the operator-configured allowedDatasets boundary and read arbitrary BigQuery tables.NVD analysis in progress High CVSS 8.6 CVE-2026-15957Smithy-RS is a Rust code generation and runtime framework that generates HTTP clients and servers from Smithy interface definitions, powering the AWS SDK for Rust and custom service implementations.
Uncontrolled recursion in the JSON, CBOR, and XML deserializer functions emitted by Amazon smithy-rs code generation could allow remote attackers to cause a denial of service (process abort via stack exhaustion) via a small request containing deeply nested data for a recursive model shape to a generated SDK or server.
To mitigate this issue, users should upgrade to aws-sdk-rust release-2026-06-02 or later. Users building custom servers with smithy-rs codegen should regenerate from smithy-rs release-2026-06-01 or later.NVD analysis in progress High CVSS 7.5 CVE-2026-1617Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Turkmesh Communication Services Inc. Turkhotspot 5651 Loglama allows SQL Injection.
This issue affects Turkhotspot 5651 Loglama: from 5.1.2 before 5.1.3. Critical CVSS 9.8 CVE-2026-16327A vulnerability was determined in D-Link DNS-320 1.0.2. This issue affects some unknown processing of the file /web/web_file/upload.php. Executing a manipulation of the argument File can lead to unrestricted upload. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. High CVSS 7.3 CVE-2026-16329A vulnerability was identified in D-Link DNS-320 1.0.2. Impacted is an unknown function of the file /photo_center/php/uploadify.php. The manipulation of the argument Malicious Handler leads to unrestricted upload. The attack may be initiated remotely. The exploit is publicly available and might be used. High CVSS 7.3 CVE-2026-16330A weakness has been identified in D-Link DNS-320 1.0.2. The impacted element is an unknown function of the file /web/jquery/uploader/uploadify.php. This manipulation of the argument https:/ucn9h68n9289.feishu.cn/wiki/JJcTwHz7aiKeq6kSItMcoeSUnMc?from=from_copylink causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. High CVSS 7.3 CVE-2026-16331A security vulnerability has been detected in D-Link DNS-320 1.0.2. This affects an unknown function of the file /web/function/save_ajax.php. Such manipulation of the argument Malicious Handler leads to unrestricted upload. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. High CVSS 7.3 CVE-2026-16332A vulnerability was detected in D-Link DNS-320 1.0.2. This impacts an unknown function of the file /mydlink/multi_uploadify.php. Performing a manipulation of the argument Filedata[] results in unrestricted upload. The attack is possible to be carried out remotely. The exploit is now public and may be used. High CVSS 7.3 CVE-2026-16349Same-origin policy bypass in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16350Incorrect boundary conditions in the Audio/Video: cubeb component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16351Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16352Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16353Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16354Information disclosure in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox High CVSS 7.5 CVE-2026-16355JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16356Sandbox escape due to use-after-free in the Disability Access APIs component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16357Incorrect boundary conditions in the Graphics component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16358Site isolation issue in the Graphics: WebRender component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16359Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.1 CVE-2026-16360Memory safety bugs present in Firefox ESR 115.37, Firefox ESR 140.12 and Firefox 152. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16361Memory safety bugs present in Thunderbird ESR 140.12. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox ESR 115.38, Firefox ESR 140.13, and Thunderbird 140.13.Mozilla Firefox Critical CVSS 9.8 CVE-2026-16362Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13.Mozilla Firefox High CVSS 8.8 601–700 / 5155 CVE