cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-76244stigmem-node contains an insecure default configuration vulnerability that allows federation traffic to traverse networks without mTLS protection when non-loopback endpoints are enabled. Operators who explicitly disabled mTLS while binding federation to non-loopback addresses expose federation traffic to cleartext interception and man-in-the-middle attacks.NVD analysis in progress Critical CVSS 9.1 CVE-2026-76245stigmem (pip package stigmem-node) version 0.9.0a1 contains a timestamp-handling mismatch in federation peer-token validation that can cause valid peer tokens to be incorrectly treated as expired. This affects the availability and reliability of authenticated federation flows on nodes using federation peer authentication paths. The issue is fixed in 0.9.0a2, which uses the canonical millisecond-based validation path.NVD analysis in progress High CVSS 7.1 CVE-2026-76251In Splunk Enterprise versions below 10.4.2, 10.2.6, and 10.0.9, a user who does not hold the "admin" or "power" Splunk roles could cause the Splunk App for Splunk Observability Cloud to forward requests to Splunk Observability Cloud, including the Splunk Observability Cloud access token stored for the app. With this access, the user could view all relevant data available to that token and make limited changes to Splunk Observability Cloud content. The vulnerability does not affect Splunk Enterprise 9.4 and 9.3 versions. The vulnerability is possible because the app's Representational State Transfer (REST) API endpoint handlers do not enforce the read_o11y_content capability before forwarding requests with the stored access token. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.Splunk High CVSS 7.1 CVE-2026-76253In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user that holds a role with the schedule_search capability could run arbitrary Search Processing Language (SPL) commands with the highest level of system privilege and read every credential stored in the credential store, which can allow for disclosure and modification of all relevant data and affect system integrity and availability. The vulnerability is possible because scheduled search alert action configuration does not properly restrict user-specific alert action settings before the search scheduler runs alert actions. For more information see Create scheduled alerts (https://help.splunk.com/en/splunk-enterprise/alert-and-respond/alerting-manual/9.3/create-alerts/create-scheduled-alerts), Set up alert actions (https://help.splunk.com/en/splunk-enterprise/alert-and-respond/alerting-manual/9.3/configure-alert-actions/set-up-alert-actions), Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities), and Configuration file precedence (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.2/administer-splunk-enterprise-with-configuration-files/configuration-file-precedence) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76254In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, 9.4.14, and 9.3.14, an unauthenticated user could cause another user to dispatch arbitrary Search Processing Language (SPL) pipelines from Dataset Explorer with the same privileges as that user, which can allow for access to all relevant data and system integrity available to that user and affect system availability. The vulnerability is possible because Dataset Explorer does not validate or escape dataset names before building SPL searches and does not apply SPL safeguards for risky commands to those searches. The vulnerability requires the attacker to phish the user by tricking them into opening the crafted link. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Explore a dataset (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.4/manage-and-explore-datasets/explore-a-dataset) and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76255In Splunk Enterprise versions below 10.4.1, 10.2.6, 10.0.8, and 9.4.13, a user who does not hold the "admin" or "power" Splunk roles could trick another user into running arbitrary Search Processing Language (SPL) commands through the Data Model Editor using the permissions of the affected user. The commands could access all relevant data available to the affected user and affect system integrity. The vulnerability is possible because Splunk Web does not apply SPL safeguards for risky commands when the Data Model Editor runs the base search for auto-extracted fields. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The user who does not hold the "admin" or "power" Splunk roles should not be able to exploit the vulnerability at will. For more information see SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.Splunk High CVSS 7.3 CVE-2026-76259In Splunk Enterprise for Windows versions below 10.4.2, 10.2.6, 10.0.9, 9.4.13, and 9.3.14, a local user with access to the Windows host could bind to the management port before Splunk Enterprise starts, intercept authentication tokens from child processes, and use those tokens to compromise all relevant data and system integrity available to the user account running Splunk Enterprise. The vulnerability is possible because the Windows management-port listener does not apply exclusive address binding protections before the service starts.Splunk High CVSS 7.8 CVE-2026-76262In Splunk Enterprise 10.4 versions below 10.4.2, an unauthenticated user could read Prometheus service metrics from the Edge Processor SPL2 Preview sidecar, including service details that expose relevant runtime and build metadata for the sidecar. The vulnerability does not affect Splunk Enterprise versions below 10.4. The information disclosure is possible because the Prometheus metrics endpoint in the Edge Processor SPL2 Preview sidecar lacks authentication, which lets any client that can reach the sidecar retrieve the metrics without credentials. For more information see About Splunk sidecars (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/splunk-sidecars/about-splunk-sidecars) in the Splunk documentation.Splunk High CVSS 7.5 CVE-2026-76310In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user who has an embedded report token could download the associated search job dispatch archive, recover session material, and use it to access all relevant data available to the report owner and affect system integrity, including by performing administrative actions when the owner holds the "admin" Splunk role. The vulnerability is possible because embedded report access does not block Representational State Transfer (REST) API dispatch archive download requests. For more information see Additional configuration for embedded reports (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/9.1/report-management/additional-configuration-for-embedded-reports) and About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.Splunk Critical CVSS 9.4 CVE-2026-76311In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user who has an embedded report token could download the dispatch archive for an embedded report search job and use exposed session material to access all relevant data and affect system integrity on the Splunk platform instance. The vulnerability is possible because the embedded report authorization flow does not block dispatch archive download requests before Splunk Enterprise begins sending the archive to the requester. For more information see Additional configuration for embedded reports (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/10.4/report-management/additional-configuration-for-embedded-reports) and Embed scheduled reports (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/10.4/report-management/embed-scheduled-reports) in the Splunk documentation.Splunk Critical CVSS 9.4 CVE-2026-76312In Splunk Enterprise versions below 10.4.1, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user who can read the Hypertext Markup Language (HTML) source of a page that embeds a Splunk report could use exposed session material to access all relevant data and affect system integrity. The vulnerability is possible because the dispatch archive download path does not correctly enforce the embedded-report authorization boundary and includes sensitive session material in archived search-job data. For more information see Additional configuration for embedded reports (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/10.4/report-management/additional-configuration-for-embedded-reports) and Embed scheduled reports (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/reporting-manual/10.4/report-management/embed-scheduled-reports) in the Splunk documentation.Splunk Critical CVSS 9.4 CVE-2026-76313In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could perform Remote Code Execution (RCE) by uploading a malicious knowledge bundle and causing it to be used by distributed search, which can allow for access to all relevant data and affect system integrity and availability. The vulnerability is possible because the Representational State Transfer (REST) API endpoint for knowledge bundle upload does not require the high-privilege capability edit_dist_peer, and distributed search accepts caller-supplied knowledge bundle selections from users who do not hold that capability. For more information see What search heads send to search peers (https://help.splunk.com/en/splunk-enterprise/administer/distributed-search/9.2/knowledge-bundle-replication/what-search-heads-send-to-search-peers), About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/9.0/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access), Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/9.1/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities), and Using the REST API reference (https://help.splunk.com/en/splunk-enterprise/rest-api-reference/10.4/introduction/using-the-rest-api-reference) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76314In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could perform Remote Code Execution (RCE) by submitting crafted Splunk Web Manager Configuration content. The user could then access all relevant data and affect system integrity and availability. The vulnerability is possible because Splunk Web evaluates manager Extensible Markup Language expressions without sufficient input restrictions, and the associated configuration route does not require the capability expected for manager configuration changes. For more information see About configuration files (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/10.4/administer-splunk-enterprise-with-configuration-files/about-configuration-files) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76315In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could execute arbitrary code on the Splunk platform instance through Splunk Web Manager Configuration. The user could then access all relevant data and affect system integrity and availability on the Splunk platform instance. The vulnerability is possible because Splunk Web Manager Configuration evaluates manager configuration values, and the Representational State Transfer (REST) API path for manager configuration does not require the permission that normally controls manager configuration writes. For more information see About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) and restmap.conf (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/10.2/configuration-file-reference/10.2.0-configuration-file-reference/restmap.conf) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76316In Splunk Enterprise versions below 10.4.1, 10.2.5, 10.0.9, and 9.4.14, an unauthenticated user who can reach the Splunk management port could store a Search Processing Language (SPL) pipeline that runs when an administrator opens the Add Data forwarder workflow. The SPL pipeline could access all relevant data, affect system integrity, and affect availability of the Splunk platform instance. The SPL injection is possible because Deployment Server client identifiers are placed into dispatched searches without neutralizing special characters. Successful exploitation requires an administrator to open the affected Add Data forwarder workflow after the unauthenticated user registers a crafted Deployment Server client identity. For more information see Forward data (https://help.splunk.com/en/splunk-enterprise/get-started/get-data-in/10.2/how-to-get-data-into-your-splunk-deployment/forward-data) and About agent management (https://help.splunk.com/en/splunk-enterprise/administer/update-your-deployment/10.4/agent-management/about-agent-management) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76317In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could move files that the user account running Splunk Enterprise can read into a lookup that the user controls. The user could then access all relevant data and affect system integrity and availability on the search head. The vulnerability is possible because the lookup configuration endpoint does not resolve lookup source paths before checking whether they stay inside the allowed lookup staging area. For more information see About lookups (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.4/use-lookups-in-splunk-web/about-lookups) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76319In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a low-privileged user that does not hold the fsh_manage capability could perform Remote Code Execution through Federated Search bundle selection. This could allow for access to all relevant data and affect system integrity and availability. The vulnerability is possible because the Federated Search dispatch flow accepts caller-controlled bundle selection without enforcing the capability that manages federated providers and indexes. For more information see Security models for Federated Search for Splunk (https://help.splunk.com/en/splunk-enterprise/search/federated-search/10.4/run-federated-searches-across-other-splunk-deployments/service-accounts-and-security-for-federated-search-for-splunk/security-models-for-federated-search-for-splunk) and Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76321In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user could inject arbitrary Search Processing Language (SPL) into requests that search for events near a selected event. This could allow for unauthorized search execution. The vulnerability is possible because Splunk Web does not consistently escape caller-supplied values when it builds SPL for nearby-event searches, and embedded report access accepts those requests without the expected authorization check. For more information see Use time to find nearby events (https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.2/specify-time-ranges/use-time-to-find-nearby-events) in the Splunk documentation.Splunk High CVSS 7.3 CVE-2026-76322In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who holds the "user" Splunk role could craft a Dashboard Studio dashboard that runs attacker-controlled Search Processing Language (SPL) for another authenticated user. The attacker-controlled SPL could access all relevant data and affect system integrity and availability. The vulnerability is possible because Dashboard Studio does not consistently enforce the expected app-visibility authorization boundary before dashboard search query options reach search dispatch. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The user who holds the "user" Splunk role should not be able to exploit the vulnerability at will. For more information see Create search-based visualizations with ds.search (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/dashboard-studio/10.4/use-data-sources/create-search-based-visualizations-with-ds.search) in the Splunk documentation.Splunk High CVSS 8 CVE-2026-76323In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could bypass Search Processing Language (SPL) safeguards for risky commands through the Job Details dashboard. The injected SPL could run using the permissions of an authenticated user who opens a crafted Job Details dashboard link. This could allow access to all relevant data and affect system integrity within those permissions. The vulnerability is possible because the Job Details dashboard does not correctly neutralize a caller-supplied search identifier before placing it into SPL searches. The vulnerability requires the attacker to phish the user by tricking them into opening the crafted link. The user who does not hold the "admin" or "power" Splunk roles should not be able to exploit the vulnerability at will. For more information see About jobs and job management (https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.4/manage-jobs/about-jobs-and-job-management) in the Splunk documentation.Splunk High CVSS 7.3 CVE-2026-76325In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who holds the "power" Splunk role could store a malicious ui-tour knowledge object that matches an auto-tour page name and share the object at the app level. The object can execute arbitrary JavaScript in the browser of another authenticated user who visits a standard Splunk Web page. The JavaScript could expose all relevant data and affect system integrity within the second user permissions. The Cross-Site Scripting (XSS) vulnerability is possible because Splunk Web resolves auto-tour entries from the app namespace and uses untrusted tour content when building the tour image.Splunk High CVSS 7.3 CVE-2026-76330In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user could trick an authenticated user into opening a crafted link to Monitoring Console. When the authenticated user opens the link, Splunk Enterprise runs attacker-controlled Search Processing Language (SPL) using the permissions of that user. The injected SPL could access data and perform actions available to that user. The vulnerability is possible because Monitoring Console does not sufficiently validate data used to build forwarder dashboard searches. The vulnerability requires the attacker to phish the user by tricking them into opening the crafted link. The unauthenticated user should not be able to exploit the vulnerability at will.Splunk High CVSS 7.1 CVE-2026-76331In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could inject Search Processing Language (SPL) into saved-search dispatch requests. This could allow for unauthorized access to all relevant data and affect system integrity within Splunk Enterprise. The vulnerability is possible because Splunk Enterprise does not correctly validate caller-supplied time values before using them in saved-search dispatch. For more information see Search endpoint descriptions (https://help.splunk.com/en/splunk-enterprise/rest-api-reference/10.2/search-endpoints/search-endpoint-descriptions) in the Splunk documentation.Splunk High CVSS 8.1 CVE-2026-76332In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user could trick an authenticated user into opening a crafted link to Analytics Workspace. When the authenticated user opens the link, Splunk Enterprise runs attacker-controlled Search Processing Language (SPL) using the permissions of that user. The injected SPL could access data and perform actions available to that user. The vulnerability is possible because Analytics Workspace does not sufficiently validate data used to build searches. The vulnerability requires the attacker to phish the user by tricking them into opening the crafted link. The unauthenticated user should not be able to exploit the vulnerability at will.Splunk High CVSS 7.1 CVE-2026-76333In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who holds the "power" Splunk role could store a Dashboard Studio workflow action with a crafted Uniform Resource Locator (URL). When another authenticated user selects the stored action from Event Actions and selects Continue, attacker-controlled JavaScript runs in the browser of that user. This could expose data or actions available through Splunk Web to that user. The vulnerability is possible because Dashboard Studio does not sufficiently validate workflow-action URLs before processing them. The vulnerability requires the attacker to phish the affected user by tricking them into initiating a request within their browser. The user who holds the "power" Splunk role should not be able to exploit the vulnerability at will. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.Splunk High CVSS 7.1 CVE-2026-76335In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an authenticated user who does not hold a role with the edit_manager_xml capability could write a malicious Splunk Web Manager Extensible Markup Language (XML) configuration. When the same user opens the affected Splunk Web Manager page, Splunk Enterprise runs attacker-controlled operating-system commands as the user account running Splunk Enterprise. The vulnerability is possible because Splunk Web does not require the edit_manager_xml capability before accepting Splunk Web Manager XML configuration changes.Splunk High CVSS 8.8 CVE-2026-76336In Splunk Enterprise versions below 10.4.2 and 10.2.6, a user who does not hold the "admin" or "power" Splunk roles could delete all Search Processing Language 2 (SPL2) modules across all apps and users on the instance through the SPL2 module management Representational State Transfer (REST) API. This could delete exported datasets and functions, affect system integrity, and cause partial service disruption. The vulnerability does not affect Splunk Enterprise versions below 10.2. The vulnerability is possible because the SPL2 module management REST API does not sufficiently authorize and validate module deletion requests. For more information see Manage SPL2 modules (https://help.splunk.com/en/splunk-enterprise/search/spl2-search-manual/multiple-searches-in-an-spl2-module/manage-spl2-modules) and Module permissions (https://help.splunk.com/en/splunk-enterprise/search/spl2-search-manual/modules-statements-and-views/module-permissions) in the Splunk documentation.Splunk High CVSS 7.1 CVE-2026-76338In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, an unauthenticated user who has access to a trusted distributed search private key could forge an administrative session token, access all relevant data, affect system integrity, and disrupt service availability. The vulnerability is possible because the distributed search authentication token endpoint does not require a signed request to identify a configured search peer, allowing the request to fall back to shared local key material. For more information see About distributed search (https://help.splunk.com/en/splunk-enterprise/administer/distributed-search/10.4/overview-of-distributed-search/about-distributed-search) and authentication.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.2-configuration-file-reference/authentication.conf) in Splunk documentation.Splunk High CVSS 8.1 CVE-2026-76344In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could write dispatch metadata to an arbitrary location on the host by supplying a crafted search identifier to a Representational State Transfer (REST) API endpoint and affect system integrity on the host. The vulnerability is possible because Splunk Enterprise does not validate the search identifier before using it to create a dispatch directory. For more information see About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.Splunk High CVSS 7.7 CVE-2026-76350In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user that holds a role with the schedule_search capability could configure Portable Document Format (PDF) attachments in the email alert action workflow. When the email alert action runs, it could execute arbitrary Search Processing Language (SPL) commands with system-level privileges, expose all relevant data, and affect system integrity and availability on the search head. The vulnerability is possible because the search scheduler passes a system-level authentication context rather than the action owner context to the email alert action when it renders PDF attachments. For more information see alert_actions.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.0-configuration-file-reference/alert_actions.conf) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76351In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, and Splunk Secure Gateway versions below 3.10.9, 3.9.23, and 3.8.70, a user who does not hold the "admin" or "power" Splunk roles could use crafted report notification data to cause Splunk Secure Gateway to send a request to the Splunk Enterprise Representational State Transfer (REST) API using a system-level session token and modify the Splunk platform configuration. The user could then obtain a session token without a password and use it to access all relevant data and affect system integrity. The vulnerability is possible because Splunk Secure Gateway does not validate decoded report notification identifiers before using them to construct requests to the Splunk Enterprise REST API.Splunk High CVSS 8.8 CVE-2026-76352In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could create or modify a scripted lookup through generic configuration endpoints and run an installed lookup script with the permissions of the user account running Splunk Enterprise, which could allow for access to all relevant data and affect system integrity and availability. The vulnerability is possible because the generic transforms configuration endpoints do not enforce the capabilities required to create or edit external lookup definitions. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and limits.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.2-configuration-file-reference/limits.conf) in the Splunk documentation.Splunk High CVSS 8.8 CVE-2026-76354In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, a user who does not hold the "admin" or "power" Splunk roles could affect system integrity and availability by sending a crafted Representational State Transfer (REST) API request that deletes or temporarily overwrites files writable by the user account running Splunk Enterprise processes on a non-captain search head cluster member. The vulnerability is possible because Search Head Clustering bundle replication does not validate the name of a replicated bundle file or neutralize NUL bytes before constructing the member bundle path. For more information see About search head clustering (https://help.splunk.com/en/splunk-enterprise/administer/distributed-search/10.4/overview-of-search-head-clustering/about-search-head-clustering), Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities), and Secure Splunk Enterprise service accounts (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/9.0/install-splunk-enterprise-securely/secure-splunk-enterprise-service-accounts) in the Splunk documentation.Splunk High CVSS 8.1 CVE-2026-76355In Splunk Enterprise 10.4 versions below 10.4.2, an unauthenticated user could retrieve the information contained in Edge Processor pipeline configurations through a Representational State Transfer (REST) API endpoint when Edge Processor is turned on. The vulnerability does not affect versions prior to 10.4. The vulnerability exists because the Edge Processor service endpoint lacks authentication controls. For more information see System architecture of the Edge Processor solution (https://help.splunk.com/en/splunk-enterprise/process-data-at-the-edge/use-edge-processors-for-splunk-enterprise/10.4/how-the-edge-processor-solution-works/system-architecture-of-the-edge-processor-solution) in the Splunk documentation.Splunk High CVSS 7.5 CVE-2026-76356In Splunk SOAR versions below 8.6.0, an unauthenticated user could spoof the source IP address in a crafted request to an Automation Broker notification endpoint and execute arbitrary code on the Splunk SOAR host. The vulnerability is possible because the Splunk SOAR Automation Broker trusts a client-supplied source IP address header as proof that the request originates from the local system. Successful exploitation can expose all relevant data, affect system integrity, and disrupt service availability. For more information see About Splunk SOAR Automation Broker (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/about-splunk-soar-automation-broker/about-splunk-soar-automation-broker) in the Splunk documentation.Splunk Soar High CVSS 8.1 CVE-2026-76357In Splunk SOAR versions below 8.6.0, an authenticated user with no role assigned could submit a crafted file path to the Representational State Transfer (REST) API and execute arbitrary code. The vulnerability is possible because the REST API does not require an assigned role for the request and does not restrict the user-supplied file path to the intended temporary directory. For more information see Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) and Splunk SOAR (On-premises) security information (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/introduction-to-splunk-soar-on-premises/splunk-soar-on-premises-security-information) in the Splunk documentation.Splunk Soar High CVSS 7.6 CVE-2026-76362In Splunk SOAR versions below 8.6.0, an unauthenticated user who can observe or alter network traffic between Splunk SOAR and a configured CyberArk Representational State Transfer (REST) server could access or modify all relevant data exchanged through that credential manager. The vulnerability is possible because the CyberArk REST client does not verify server certificates by default. The attack requires the attacker to have network-path interception capability between Splunk SOAR and the configured CyberArk REST server. For more information see Manage your organization's credentials with a password vault (https://help.splunk.com/en/splunk-soar/soar-cloud/administer-soar-cloud/configure-administration-settings-in-splunk-soar-cloud/manage-your-organizations-credentials-with-a-password-vault) in the Splunk documentation.Splunk Soar High CVSS 7.4 CVE-2026-76387In Splunk Enterprise Security versions below 8.6.1, a user who holds a Splunk Enterprise Security role that contains the mc_investigation_read capability could inject Search Processing Language (SPL) through Analyst Queue search filters, allowing for access to all relevant data and system integrity available to the scheduled searches that run for that user. The vulnerability is possible because the Analyst Queue search filter handling does not validate filter field names before the fields are included in SPL searches. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.4/installation/users-and-roles-for-splunk-enterprise-security), Manage analyst workflows using the analyst queue in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.4/mission-control/manage-analyst-workflows-using-the-analyst-queue-in-splunk-enterprise-security), and Overview of Mission Control in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.5/mission-control/overview-of-mission-control-in-splunk-enterprise-security) in the Splunk documentation.Splunk Enterprise Security High CVSS 8.1 CVE-2026-76388In Splunk Enterprise Security versions below 8.6.1, a user who holds the ess_analyst Splunk Enterprise Security role could change User and Entity Behavior Analytics (UEBA) search macros that scheduled searches run with administrator permissions, allowing for access to all relevant data and system integrity through those searches. The vulnerability is possible because the UEBA app metadata grants analyst roles write access to search macros that should be writable only by administrator roles. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.4/installation/users-and-roles-for-splunk-enterprise-security) and Roles and knowledge objects in UEBA for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.5/user-and-entity-behavior-analytics/roles-and-knowledge-objects-in-ueba-for-splunk-enterprise-security) in the Splunk documentation.Splunk Enterprise Security High CVSS 8.1 CVE-2026-76389In Cisco Talos Intelligence for Enterprise Security Cloud versions below 1.0.3, a user that holds a role with the get_talos_enrichment capability could send a crafted request to the Talos intelligence enrichment Representational State Transfer (REST) API endpoint and cause the instance to make an outbound request to an attacker-controlled server. The request could expose tokens that compromise all relevant data and system integrity in the Splunk instance. The vulnerability is possible because the Talos intelligence enrichment REST endpoint accepts the destination for authenticated Splunk management requests from request data. For more information see Deploy Cisco Talos Intelligence for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.0/introduction/deploy-cisco-talos-intelligence-for-splunk-enterprise-security-cloud-only) in the Splunk documentation.Cisco Talos Intelligence For Enterprise Security Cloud High CVSS 8.8 CVE-2026-76391In Splunk AI Toolkit versions below 6.0.0, a user who does not hold the "admin" or "power" Splunk roles could run searches with system-level privileges, access all relevant data, affect system integrity, and read or delete search jobs belonging to other users through Agent Run History. The improper privilege management is possible because the Agent Run History handler replaces the calling user session key with a system authentication token before it performs search operations. For more information see AI Toolkit Agent Launchpad (https://help.splunk.com/en/splunk-enterprise/apply-machine-learning/use-ai-toolkit/6.0.0/ai-toolkit-connections-containers-and-agents/ai-toolkit-agent-launchpad) in the Splunk documentation.Splunk Ai Toolkit High CVSS 8.3 CVE-2026-76394In Splunk AI Toolkit versions below 6.0.0, a low-privileged user who does not hold the "admin" or "power" Splunk roles could start, stop, and configure containers, and read or modify connection and configuration data through the Representational State Transfer (REST) API. The missing authorization is possible because multiple REST API handlers in Splunk AI Toolkit do not enforce authorization checks. For more information see Troubleshoot the Splunk Machine Learning Toolkit (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/machine-learning-toolkit-user-guide/5.5.0/troubleshooting-mltk/troubleshoot-the-splunk-machine-learning-toolkit) in the Splunk documentation.Splunk Ai Toolkit High CVSS 8.3 CVE-2026-76395In Splunk AI Toolkit versions below 6.0.0, a user who holds the "power" Splunk role could execute arbitrary code on the Splunk server by loading a model file containing crafted sparse matrix data. The deserialization of untrusted data is possible because a model codec in Splunk AI Toolkit deserializes sparse matrix data without guarding against embedded pickle content. For more information see Troubleshoot the Splunk Machine Learning Toolkit (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/machine-learning-toolkit-user-guide/5.5.0/troubleshooting-mltk/troubleshoot-the-splunk-machine-learning-toolkit) in the Splunk documentation.Splunk Ai Toolkit High CVSS 8.8 CVE-2026-76396In Splunk AI Toolkit versions below 6.0.0, a user that holds a role with the schedule_search capability could cause a scheduled search to load and deserialize a model file through the apply search command. The improper access control is possible because Splunk AI Toolkit does not mark the apply search command as risky. For more information see Troubleshoot the AI Toolkit (https://help.splunk.com/en/splunk-enterprise/apply-machine-learning/use-ai-toolkit/5.7.3/troubleshooting-the-ai-toolkit/troubleshoot-the-ai-toolkit) in the Splunk documentation.Splunk Ai Toolkit High CVSS 7.5 CVE-2026-76397In Splunk AI Toolkit versions below 6.0.0, a user who holds the "power" Splunk role could access and delete all relevant data in experiment history, including data associated with other users. The vulnerability is possible because Splunk AI Toolkit does not preserve the trusted experiment scope when it processes caller-controlled query values before accessing restricted history data. For more information see Experiment Assistants (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/use-ai-toolkit/5.6.4/experiment-assistants) in the Splunk documentation.Splunk Ai Toolkit High CVSS 8.1 CVE-2026-76399In Splunk AI Toolkit versions below 6.0.1, a user who holds the "power" Splunk role could modify app-provided scheduled searches to run arbitrary Search Processing Language (SPL) using the permissions of the search owner, which could allow access to all relevant data and affect system integrity. The vulnerability is possible because Splunk AI Toolkit gives the "power" Splunk role permission to modify scheduled searches that run using the permissions of the search owner.Splunk Ai Toolkit High CVSS 8.1 CVE-2026-76402In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure a non-secure Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise that causes the connector to send authentication credentials to an attacker-controlled server, allowing for exposure of credentials that compromise all relevant data sent through the connector and limited alteration of event delivery. The vulnerability is possible because HTTP Event Collector endpoint validation does not require secure transport by default. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation.Splunk Connect For Kafka High CVSS 8.2 CVE-2026-76403In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user positioned in the network path could read or alter all relevant data sent from the connector when Kerberos authentication is used with Hypertext Transfer Protocol (HTTP) Event Collector in Splunk Enterprise. The vulnerability is possible because the Kerberos authentication path does not apply the configured certificate validation options when it builds the HTTP client. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Security configurations for Splunk Connect for Kafka (https://help.splunk.com/en/splunk-enterprise/get-data-in/splunk-connect-for-kafka/2.2/configure/security-configurations-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation.Splunk Connect For Kafka High CVSS 7.4 CVE-2026-76404In Splunk MCP Server app versions below 1.2.1, a user who holds the "admin" Splunk role could execute arbitrary commands on the underlying operating system. The vulnerability is possible because of missing input validation in the app's credential management component, which deserializes stored data without checking whether the content is of the expected type.Splunk Model Context Protocol Server Critical CVSS 9.1 CVE-2026-76574A flaw has been found in code-projects Hospital Information System 1.0. The impacted element is the function User::login of the file includes/users/UsersController.php of the component User Login Handler. This manipulation of the argument email causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. High CVSS 7.3 CVE-2026-76582A vulnerability was determined in TRENDnet TEW-821DAP 2.2.01b05. Affected is the function popen/system of the file /cgi-bin/ping.cgi of the component ssi. Executing a manipulation of the argument ipaddr can lead to command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. High CVSS 7.4 CVE-2026-76583A vulnerability was identified in TRENDnet TV-IP751WIC 11.03.03. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/admin/set_time.cgi of the component alphapd. The manipulation leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. High CVSS 7.4 CVE-2026-76584A security flaw has been discovered in TRENDnet TV-IP751WIC 11.03.03. Affected by this issue is some unknown functionality of the file /cgi-bin/admin/set_time.cgi of the component alphapd. The manipulation of the argument Currenttime results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. Critical CVSS 9.9 CVE-2026-76589A vulnerability was found in TRENDnet TEW-755AP up to 20260702. Affected is the function FUN_401000 of the file /sbin/mycli. The manipulation of the argument ssid results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. Critical CVSS 9.9 CVE-2026-76590A vulnerability was identified in TRENDnet TEW-755AP up to 20260702. Affected by this issue is some unknown functionality of the file /cgi-bin/wan.cgi of the component ssi. Such manipulation of the argument cameo.wan.wan_pppoe_password_00 leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. Critical CVSS 9.9 CVE-2026-76591A security flaw has been discovered in TRENDnet TEW-755AP up to 20260702. This affects the function log_email_server of the file /cgi-bin/email.cgi of the component ssi. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. High CVSS 7.4 CVE-2026-76647Leantime JSON-RPC API through version 3.9.0 contains a missing authorization vulnerability in the JSON-RPC dispatcher in app/Domain/Api/Controllers/Jsonrpc.php. The dispatcher does not enforce authorization before invoking service-layer methods, allowing an authenticated user to call methods or act on resources outside their intended permissions. For example, the editOwn method accepts a user-supplied user ID without verifying that it belongs to the caller, allowing an attacker to modify another user's account and set a new password, resulting in account takeover. This vulnerability is distinct from CVE-2026-59712 and CVE-2026-15509 because the root cause is the lack of centralized authorization enforcement in the JSON-RPC dispatcher rather than the behavior of an individual exposed method.NVD analysis in progress High CVSS 8.8 CVE-2026-76760A vulnerability was found in chenhg5 cc-connect up to 1.4.1. Affected by this vulnerability is the function Authenticate of the file core/webhook.go. The manipulation of the argument exec results in code injection. The attack may be performed from remote. The exploit has been made public and could be used. The reported GitHub issue was closed automatically due to inactivity. High CVSS 7.3 CVE-2026-76761A vulnerability was identified in chenhg5 cc-connect up to 1.4.1. This affects the function shellExecCommand of the file core/engine.go of the component Management API. Such manipulation of the argument exec leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically due to inactivity. High CVSS 7.3 CVE-2026-76832Agno's PythonTools in libs/agno/agno/tools/python.py contains a path traversal vulnerability that allows attackers to read, write, or execute arbitrary files by supplying parent-directory traversal sequences in the file_name argument passed to read_file, save_to_file, or run_python_file tool actions. Attackers can inject traversal sequences such as '../../../../../../etc/passwd' through direct tool invocation or via prompt injection embedded in agent-processed content to escape the intended base_dir boundary and achieve arbitrary file read, arbitrary file write, or arbitrary Python code execution within the process user's authority.NVD analysis in progress High CVSS 8.8 CVE-2026-76850LMDeploy deserializes disaggregated-serving peer messages with pickle. The handle_zmq_recv coroutine in lmdeploy/pytorch/disagg/conn/engine_conn.py reads peer-to-peer cache-free requests with recv_pyobj(), which deserializes the received bytes with pickle.loads(), and the isinstance check against DistServeCacheFreeRequest runs only after deserialization has already completed. The peer that supplies those bytes is caller-controlled: p2p_connect passes remote_engine_endpoint_info.zmq_address from the request body to connect() on the ZMQ PULL socket, and the POST /distserve/p2p_initialize and /distserve/p2p_connect endpoints in lmdeploy/serve/openai/api_server.py apply no authentication unless the server is started with api_keys, which defaults to None. A remote attacker can direct an engine to pull from a ZMQ endpoint under their control and execute arbitrary code in the engine process. Deployments that do not enable disaggregated serving are not affected, because the receive loop is only started once the migration backend accepts the connection.NVD analysis in progress Critical CVSS 9.8 CVE-2026-76878In OpenStack Aodh before 22.0.1, the alarm list API bypasses project scoping when the all_projects query parameter is set to false. The API checks for the presence of the all_projects key rather than its value; a true value enforces the administrator-only policy, but a false value removes the key and skips the branch that normally restricts results to the caller's project. A non-admin user with the reader role can list alarms from all projects, exposing alarm actions containing trust webhook URLs, Heat signal endpoints, project IDs, and user IDs. The parameter can also be combined with a foreign project_id to target a specific project's alarms. A related concern is that OpenStack Watcher does not apply authorization to its webhook trigger endpoint. Any authenticated user who learns an audit's webhook URL, for example from this leaked Aodh alarm metadata, can start an EVENT audit and its associated action plan regardless of their own project or role. The webhook endpoint has lacked policy enforcement since its introduction in the Ussuri release (Watcher 4.0.0).NVD analysis in progress High CVSS 8.4 CVE-2026-76879C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of serviceNVD analysis in progress High CVSS 7.5 CVE-2026-76880RRC protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of serviceNVD analysis in progress High CVSS 7.5 CVE-2026-76886C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of serviceWireshark Critical CVSS 9.8 CVE-2026-76888RDP protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of serviceWireshark High CVSS 7.5 CVE-2026-76928X.509IF protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of serviceNVD analysis in progress High CVSS 7.5 CVE-2021-43716Verification Bypass vulnerability exists in EPSON 150075647YWWV110 EasyMP Network Updater Ver.1.20. The Epson projector can be updated by encrypted firmware through USB.NVD analysis in progress Critical CVSS 9.8 CVE-2021-43717An issue exists in pson EH-TW5350 Epson iProjection.apk v3.2.6. If you identify a projector equipped with an iProjection function, you can access the projector using hard-coded authentication information and control the projector maliciously.NVD analysis in progress Critical CVSS 9.8 CVE-2025-9210Missing signature validation in JSON Web Tokens in Otalio Ship Property Management System versions before 2.22.0 allows authenticated attackers to escalate privileges via tampering with JWTsNVD analysis in progress High CVSS 8.1 CVE-2026-11801The WPAdverts – Classifieds Plugin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.3.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to retrieve internal site configuration data exposed by the classifieds-types REST endpoint, including registered post types, labels, associated taxonomies, form scheme metadata, contact options, and custom field meta keys. High CVSS 7.5 CVE-2026-12564A flaw was found in the AAP Controller's HashiCorp Vault credential plugin. The kubernetes_auth() function in awx_plugins/credentials/hashivault.py reads the controller pod's Kubernetes service account token and sends it to an attacker-controlled URL when a HashiCorp Vault Secret Lookup credential with kubernetes_role authentication is tested. An authenticated attacker with credential-creation privileges can exfiltrate the service account token, gaining Kubernetes API access to the control plane namespaces with full pod CRUD and secret read permissions, including database credentials and the Django SECRET_KEY.NVD analysis in progress Critical CVSS 9.6 CVE-2026-15315Tapo C200 v5
contains an improper authentication vulnerability within the login
authentication verification module. An attacker on the local network can
exploit weaknesses in challenge parameter validation to bypass normal
authentication controls and obtain administrative session tokens.
Successful
exploitation may allow an attacker to subsequently execute privileged
management actions, enable unauthorized administrative access and temporary
disruption of device services, resulting in a denial-of-service (DoS)
condition.NVD analysis in progress High CVSS 8.7 CVE-2026-15316An improper input
validation vulnerability in the configuration service for processing encrypted
credential data has been identified in Tapo C200 v5. An attacker can send oversized crypted
ciphertext values that may trigger exception handling failures, due to insufficient
validation, causing the affected device to crash or restart.
Successful
exploitation may temporarily disrupt HTTPS management and monitoring
functionality, resulting in a denial-of-service (DoS) condition until the
service recovers.NVD analysis in progress High CVSS 7.1 CVE-2026-15371Velociraptor's web GUI allows specifying a custom type for columns in tables. The URL type takes the cell value and forms a URL which can be clicked in the GUI.The code does not limit the schemes allowed in this URL , allowing an attacker to specify a JavaScript scheme exposing the user to XSS.NVD analysis in progress High CVSS 8.1 CVE-2026-15571A flaw was found in the legacy client-initiated account-linking endpoint of Keycloak, a widely used open-source identity and access management solution. The mechanism used to protect the account-linking process from unauthorized requests relies on a hash that can be predicted by a malicious OIDC client. By tricking a user into authenticating, an attacker-controlled client can forge a valid linking URL to connect the victim's account to an attacker's external identity. This results in a full account takeover, allowing the attacker to log in as the victim.NVD analysis in progress High CVSS 7.3 CVE-2026-15585Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in AKIN Software Computer Import Export Industry and Trade Ltd. AKINSOFT Wolvox9 ERP / KontrolPanel.exe allows Path Traversal.
This issue affects AKINSOFT Wolvox9 ERP / KontrolPanel.exe: from s26.02.17 before 26.02.22.NVD analysis in progress High CVSS 7.5 CVE-2026-15748The Forminator Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.56.1 via the handle_file_upload function. This is due to insufficient file type validation in handle_file_upload, where the dangerous-extension blocklist performs exact-key matching that is bypassed by pipe-alternative MIME type keys, combined with a public submission handler that trusts attacker-controlled upload field configuration injected via a forged Select field value. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Critical CVSS 9.8 CVE-2026-17106The tar extraction routines in moby/go-archive (Unpack, UnpackLayer, Untar/UntarUncompressed, and the ApplyLayer helpers) do not confine filesystem operations to the destination directory. The extractor decides where each archive entry lands using lexical string checks and then performs the filesystem operation on a path that is resolved by the OS, so links introduced by the archive can be followed out of the destination directory. An attacker who controls the contents of an archive can create or overwrite files at arbitrary paths writable by the extracting process.NVD analysis in progress High CVSS 7.1 CVE-2026-18534ArcSearch for iOS versions prior to 1.48.0 could keep the address bar hidden after a page-initiated scroll, allowing attacker-controlled content to imitate browser interface elements and increasing spoofing risk.NVD analysis in progress High CVSS 7.4 CVE-2026-18963A flaw was found in the reset-credentials flow of the keycloak-services component, which is the core engine for identity and access management in Red Hat Build of Keycloak. The issue allows an unauthenticated attacker to force the password reset process for any user without needing to click the required email verification link. This can result in the attacker gaining full control over target user accounts by directly setting new credentials.NVD analysis in progress Critical CVSS 9.1 CVE-2026-19500The Entries component in Brainstorm Force SureForms version, less than 2.12.3, does not enforce adequate limits on user-controlled form fields or submitted content during processing and rendering, which allows a remote attacker to exhaust server resources, prevent administrators from accessing the Entries interface, and trigger HTTP 500 errors via crafted form submissions.NVD analysis in progress High CVSS 7.5 CVE-2026-19501CSV export functionality in Brainstorm Force SureForms version, <= 2.12.1, fails to neutralize spreadsheet formula characters in user-controlled form field names before generating CSV exports, which allows a remote attacker to execute spreadsheet formulas on an administrator's workstation when the exported CSV file is opened in a vulnerable spreadsheet application.NVD analysis in progress High CVSS 8.8 CVE-2026-19869@neo4j/graphql from 5.2.0 until the patched versions fails to enforce field-level @authentication rules on root custom-resolver fields when a type-level @authentication rule is also present on the same operation type. When both a type-level @authentication (on Query/Mutation) and a field-level @authentication (on a root custom-resolver field within that type) are declared, only the type-level rule is evaluated and the field-level rule is silently discarded. As a result a stricter per-field requirement — such as an admin-role JWT claim (jwt: { roles_INCLUDES: "admin" }) — is never checked, and any client that satisfies the coarser type-level requirement can invoke the more-restricted field. No token forgery is involved: a legitimately issued, correctly signed non-admin token (e.g. roles: ["user"]) is sufficient.NVD analysis in progress High CVSS 7.6 CVE-2026-21580This Critical severity Stored XSS, PrivEsc (Privilege Escalation), and Security Misconfiguration vulnerability was introduced in versions 7.1.1, 7.4.0, 7.13.0, 7.17.0, 7.19.0, 8.0.0, 8.5.0, 8.9.0, 9.0.1, 9.1.0, 9.2.0, 9.3.1, 9.4.0, 9.5.1, 10.0.2, 10.1.0 and 10.2.0 of Confluence Data Center and Server.
This Stored XSS, PrivEsc (Privilege Escalation), and Security Misconfiguration vulnerability, with a CVSS Score of 8.6, allows an unauthenticated attacker to execute arbitrary HTML or JavaScript code on a victims browser, perform actions as a higher-privileged user, and to get into the system utilizing loopholes exposed from security best-practices being overlooked.
Atlassian recommends that Confluence Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
Confluence Data Center and Server 9.2: Upgrade to a release greater than or equal to 9.2.21
Confluence Data Center and Server 10.2: Upgrade to a release greater than or equal to 10.2.13
See the release notes ([https://confluence.atlassian.com/doc/confluence-release-notes-327.html]). You can download the latest version of Confluence Data Center and Server from the download center ([https://www.atlassian.com/software/confluence/download-archives]).
This vulnerability was reported via our Bug Bounty program.NVD analysis in progress Critical CVSS 9.3 CVE-2026-21582This High severity BASM (Broken Authentication & Session Management) vulnerability known as CVE-2026-21582 was introduced in version 7.2.1 of Crowd Data Center.
This BASM (Broken Authentication & Session Management) vulnerability, with a CVSS Score of 8.8, allows an unauthenticated attacker to perform actions as another user.
Atlassian recommends that Crowd Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
Crowd Data Center 7.2: Upgrade to a release greater than or equal to 7.2.2
See the release notes (https://confluence.atlassian.com/crowd/crowd-release-notes-199094.html). You can download the latest version of Crowd Data Center from the download center (https://www.atlassian.com/software/crowd/download-archive).
This vulnerability was reported via our Penetration Testing program.NVD analysis in progress High CVSS 8.8 CVE-2026-21584This High severity Improper Authorization vulnerability was introduced in versions 10.0.0, 10.1.0, 10.2.0, 11.0.0, 12.0.0, and 12.1.0 of Bamboo Data Center.
This Improper Authorization vulnerability, with a CVSS Score of 7.6, allows an authenticated attacker to gain unintended access and can lead to the exposure of resources or functionality, possibly providing attackers with sensitive information or even execute arbitrary code.
Atlassian recommends that Bamboo Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
* Bamboo Data Center 10.2: Upgrade to a release greater than or equal to 10.2.22
* Bamboo Data Center 12.1: Upgrade to a release greater than or equal to 12.1.10
See the release notes (https://confluence.atlassian.com/bambooreleases/bamboo-release-notes-1189793869.html). You can download the latest version of Bamboo Data Center from the download center (https://www.atlassian.com/software/bamboo/download-archives).
This vulnerability was reported via our Penetration Testing program.NVD analysis in progress High CVSS 7.6 CVE-2026-23929Prototype pollution vulnerability in searchParamsToObject() is leading to a persistent XSS in Maps. URL parameter processing was not filtering dangerous properties like __proto__, combined with jQuery's unsafe element creation that traversed the prototype chain.NVD analysis in progress High CVSS 8.5 CVE-2026-23933In Zabbix 7.4 the cryptographic key used for signing Frontend sessions has been erroneously written to the database seed. Currently the only known exploitation scenario is for deployments that utilize both - SAML authentication and guest users. In such cases the key can be used to forge valid session cookies, potentially leading to unauthorized access. For other Zabbix deployments this does not have a known impact.NVD analysis in progress High CVSS 7.7 CVE-2026-24183NVIDIA Cumulus Linux contains a vulnerability in the user management component, where an unprivileged user could use improper privilege management on the system. A successful exploit of this vulnerability might lead to escalation of privileges.NVD analysis in progress High CVSS 7.8 CVE-2026-24184NVIDIA Cumulus Linux contains a vulnerability in the Link Layer Discovery Protocol (LLDP) daemon component, where an unauthenticated attacker on an adjacent network could cause buffer overflow by sending crafted LLDP frames. A successful exploit of this vulnerability might lead to code execution.NVD analysis in progress High CVSS 7.5 CVE-2026-24185NVIDIA NVOS for network switches contains a vulnerability in the secure shell (SSH) server configuration component while PKA-only mode is enabled, where an administrator could inadvertently enable an alternative authentication path. If best practices for replacing the default password as recommended by NVIDIA are not followed, this alternative authentication path might lead to unauthorized access. A successful exploit of this vulnerability might lead to escalation of privileges.NVD analysis in progress High CVSS 7.1 CVE-2026-24301Improper neutralization of special elements used in a command ('command injection') in Microsoft Copilot allows an unauthorized attacker to disclose information over a network.NVD analysis in progress High CVSS 8.8 CVE-2026-28191Subscriber Privilege Escalation in The Grid <= 2.7.9.1 versions. High CVSS 8.8 CVE-2026-28192Unauthenticated Arbitrary File Upload in Piotnet Addons For Elementor Pro <= 7.1.67 versions. Critical CVSS 9.6 CVE-2026-28567Unauthenticated Broken Access Control in WP Sort Order <= 1.3.5 versions. High CVSS 7.5 CVE-2026-28568Unauthenticated Cross Site Scripting (XSS) in Quill Forms <= 5.7.1 versions. High CVSS 7.1 CVE-2026-28569Unauthenticated Cross Site Scripting (XSS) in SSL Zen <= 4.7.43 versions. High CVSS 7.1 CVE-2026-28570Unauthenticated Local File Inclusion in Vavo Core <= 2.3.0 versions. High CVSS 8.1 CVE-2026-28571Unauthenticated Broken Access Control in FormyChat <= 2.15.7 versions. High CVSS 7.5 701–800 / 11286 CVE