cve
Vulnerability watch Full archive
idvulnerabilityseveritypublished
CVE-2026-74563In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check()
rds_tcp_laddr_check() looks up a scoped IPv6 interface with
dev_get_by_index_rcu(), drops the RCU read-side lock, and only then
passes the bare struct net_device * into ipv6_chk_addr().
dev_get_by_index_rcu() only keeps the device alive within the same RCU
read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can
free the net_device; ipv6_chk_addr() then dereferences the stale pointer
in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading
freed memory.
Keep the RCU read-side lock held across the ipv6_chk_addr() call instead
of dropping it right after the lookup, so the device cannot be freed
while it is in use.
BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
Read of size 8 at addr ffff8880106ec000 by task exploit/153
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
__ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972)
rds_tcp_laddr_check (net/rds/tcp.c:370)
rds_bind (net/rds/bind.c:248)
__sys_bind (net/socket.c:1920)
__x64_sys_bind (net/socket.c:1956)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)NVD analysis in progress High CVSS 7.8 CVE-2026-74564In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the
dsthash_ent structure which represents an entry in the hashtable. There
is a union area which uses a different layout to express the rate match
mode.
Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode
flag is requested by two or more different rules that refer to the same
hashtable. Otherwise, uninitialized access to the burst field in the
union is possible.
Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by
revision less than 3 too.NVD analysis in progress High CVSS 7.1 CVE-2026-74565In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup().NVD analysis in progress High CVSS 7.8 CVE-2026-74567In the Linux kernel, the following vulnerability has been resolved:
keys: fix out-of-bounds read in keyring_get_key_chunk()
For description-level chunks keyring_get_key_chunk() advances the read
pointer by level * sizeof(long) past the inline prefix but only
bounds-checks the prefix, so a long enough key description is read past
its kmemdup(desc, desc_len + 1) allocation. Compute the full byte
offset and bounds-check the description against it before reading.
The walk only reaches a description-level chunk when two keys collide
through the hash, x, type and domain_tag chunks, so this is reached from
an unprivileged add_key(2) with a crafted pair of same-type keys whose
index hashes collide; KASAN reports a slab-out-of-bounds read.NVD analysis in progress High CVSS 7.1 CVE-2026-74568In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Fix race between LPI release and re-registration
Fix a potential race between decrementing an LPI's reference count and
evicting that structure from the LPI xarray.
LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa).
When the reference count of an LPI structure drops to zero,
vgic_release_lpi_locked() removes the structure from the xarray and
frees it under the xarray lock.
However, the release of an LPI can race with a concurrent LPI
re-registration with the same INTID via vgic_add_lpi() on another CPU,
since the reference count drop and the xarray eviction are not performed
in a single atomic step. This can happen e.g. if the guest issues a
DISCARD while the LPI is still referenced from a vCPU's active-pending
list (ap_list), and the same INTID is re-mapped via MAPTI.
Particularly, vgic_release_lpi_locked() is called from two distinct
paths: direct release via vgic_put_irq(), and deferred release via
vgic_release_deleted_lpis(). During direct release, the issue can result
in deleting a newly registered LPI from the xarray:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq()
__vgic_put_irq()
refcount_dec_and_test()
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(old_irq) == false
new IRQ inserted --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
xa_lock_irqsave();
vgic_release_lpi_locked()
__xa_erase(.., irq->intid) <-- BUG: new IRQ is erased
kfree_rcu(old_irq)
During the deferred release path, the old IRQ can be leaked:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq_norelease()
__vgic_put_irq()
refcount_dec_and_test()
irq->pending_release = true
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(oldirq) == false
BUG: old IRQ overwritten --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
vgic_release_deleted_lpis()
xa_lock_irqsave()
xa_for_each() { .. } <-- old IRQ with pending_release = true
is gone, so it cannot be released
To fix the direct release path, move the reference count drop inside
the xarray lock, making sure that vgic_add_lpi() never encounters the
to-be-released LPI.
In the deferred release path, the refcount drop must happen under a raw
spinlock, so the xarray lock cannot be grabbed, and the same solution
does not work. Instead, update vgic_add_lpi(), so that if it evicts
an LPI from the xarray, it takes on the responsibility of freeing it.
Consequently, an LPI may now be freed concurrently after a deferred
release drops the refcount, so accessing the pending_release field is no
longer safe from use-after-free. Delete all uses of the flag, and update
vgic_release_deleted_lpis() to identify orphaned LPIs purely based on
their refcount.NVD analysis in progress Critical CVSS 9.3 CVE-2026-74569In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...NVD analysis in progress Critical CVSS 9.8 CVE-2026-74570In the Linux kernel, the following vulnerability has been resolved:
ntfs: harden runlist realloc size calculations
Add a shared helper to safely convert runlist element counts to byte sizes
using overflow checks, and use it in both ntfs_rl_realloc() and
ntfs_rl_realloc_nofail().NVD analysis in progress Critical CVSS 9.8 CVE-2026-74572In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem.NVD analysis in progress High CVSS 7.5 CVE-2026-74573In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently.NVD analysis in progress Critical CVSS 9.3 CVE-2026-74574In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback.NVD analysis in progress High CVSS 7.8 CVE-2026-74575In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.NVD analysis in progress High CVSS 8.8 CVE-2026-74576In the Linux kernel, the following vulnerability has been resolved:
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-
---truncated---NVD analysis in progress High CVSS 7.5 CVE-2026-74764Pandora contains a path traversal vulnerability in its TAR archive extraction functionality. When processing a submitted TAR archive, the extractor passed archive member names directly to Python's tarfile.TarFile.extract() without applying an extraction filter.
An attacker able to submit a specially crafted TAR archive containing malicious member paths, such as paths using ../ sequences or absolute paths, could cause extracted files to be written outside the intended extraction directory. This may allow the attacker to overwrite files accessible to the Pandora worker process and could potentially result in application compromise, arbitrary code execution, or denial of service depending on the files targeted and the privileges of the Pandora process.
The vulnerability is corrected by using Python's filter='data' extraction filter, which rejects or sanitizes dangerous TAR members, including paths that escape the destination directory and unsafe link targets.
The weakness corresponds to MITRE's general path traversal category, which includes archive extraction cases where attacker-controlled filenames cause files to be written outside the intended directory.NVD analysis in progress Critical CVSS 10 CVE-2026-74767Pandora contains a denial-of-service vulnerability in its handling of DAA (Direct Access Archive) files. When extracting the internal ISO image from a DAA archive, compressed chunks were decompressed using zlib.decompress() without enforcing a limit on the resulting uncompressed data.
An attacker able to submit a crafted DAA file containing highly compressed data could cause Pandora to decompress a relatively small input into a very large amount of data in memory. Because the decompressed chunks are accumulated to construct the internal ISO image, this could result in excessive memory consumption and potentially CPU exhaustion, causing the extraction worker to become unresponsive, terminate, or affect the availability of the Pandora service.
The patch introduces bounded decompression using decompressobj().decompress() with max_extracted_filesize, verifies the cumulative size of decompressed chunks, and raises a dedicated ZipBomb exception when the configured limit is exceeded. Pandora then aborts extraction and reports the file as too large.NVD analysis in progress High CVSS 8.7 CVE-2025-7639The vulnerability, if exploited, could allow an authenticated miscreant
with "DNA Authority - Operator" privilege to tamper with serialized
data, potentially resulting in code execution during deserialization
under the privilege of Enterprise SCADA security group "DNA Apps".NVD analysis in progress High CVSS 7.1 CVE-2026-12364The user-space system-call verifier z_vrfy_z_log_msg_static_create() in subsys/logging/log_msg.c was a pure pass-through: it forwarded the caller-supplied source, desc, package, and data arguments directly to the kernel-mode implementation z_impl_z_log_msg_static_create() without performing any of the mandatory K_SYSCALL_* checks. Because z_log_msg_static_create() is declared __syscall, under CONFIG_USERSPACE any unprivileged user-mode thread can invoke it directly with fully attacker-controlled arguments.
The kernel-mode handler dereferences each of these untrusted values: frontend_runtime_filtering() reads through the source pointer as a struct log_source_dynamic_data, cbprintf_package_copy() reads desc.package_len bytes from the package pointer, and z_log_msg_finalize() performs a memcpy() of desc.data_len bytes from the data pointer. With no verification, a user thread can supply arbitrary kernel addresses and arbitrary lengths, and the kernel will read from them.
The impact is a kernel-mode denial of service (the kernel faults dereferencing an attacker-chosen pointer) and, where a log backend output is observable to the attacker, disclosure of arbitrary kernel memory copied into the emitted log message — a confidentiality breach across the user/kernel boundary that the userspace sandbox is meant to enforce. The reads do not corrupt kernel memory, so there is no out-of-bounds write primitive.
The fix adds the required validation to the verifier: it bounds desc.package_len against Z_LOG_MSG_MAX_PACKAGE, rejects non-NULL/length mismatches, and applies K_SYSCALL_MEMORY_READ() to package, data, and (when runtime filtering with a frontend is enabled) source, so any out-of-bounds or kernel pointer now raises K_OOPS instead of being honored.NVD analysis in progress High CVSS 8.4 CVE-2026-12366Zephyr's dynamic kernel-object disposal path unref_check() in kernel/userspace/userspace.c frees an object's storage (k_free(dyn->data)) once its reference count reaches zero, after running a per-object-type cleanup. The cleanup switch handled only K_OBJ_MSGQ and K_OBJ_STACK; there was no K_OBJ_TIMER case. A dynamically-allocated, initialized, and armed k_timer keeps its embedded struct _timeout dnode linked in the global timeout queue (_timeout_q), so freeing the timer storage without cancelling the timeout leaves a dangling node in that queue.
When the timer next expires, the timeout machinery walks _timeout_q and invokes z_timer_expiration_handler() on the freed node, dereferencing and writing freed (and reusable) kernel heap in kernel/ISR context. This is a deterministic use-after-free that does not depend on SMP: the queued node is simply never unlinked at free time.
The disposal is reachable from an unprivileged user thread under CONFIG_USERSPACE + CONFIG_DYNAMIC_OBJECTS: a thread that holds the last permission on such a timer drops it via the k_object_release() syscall (or by exiting, through k_thread_perms_all_clear()), and can arm the timer itself via the k_timer_start() syscall. The free and the expiration handler run at kernel privilege while the actor is a user thread, so the bug is a sandbox-escape memory-corruption primitive usable for privilege escalation. The fix adds k_timer_cleanup() (cancel the timeout and wait for any in-flight handler) and calls it for K_OBJ_TIMER before freeing.NVD analysis in progress High CVSS 8.8 CVE-2026-12949The Wishlist Member plugin for WordPress is vulnerable to Account Takeover via Insufficient Verification of Data Authenticity in versions up to and including 3.34.1. This is due to the wpm_register() function validating the registration cookie only against the GET reg parameter while accepting the POST mergewith and POST wpm_id parameters without verifying that the mergewith user ID references a temporary or incomplete registrant that is bound to the current registration transaction. This makes it possible for unauthenticated attackers to take over any existing WordPress account — including administrator accounts — by supplying an arbitrary user's numeric ID as the mergewith value, which causes wp_update_user() to overwrite the target account's username (additionally written via a direct $wpdb UPDATE), password, email address, first name, and last name with attacker-controlled values, while WordPress password and email change notification emails are explicitly suppressed. When wpm_id references a non-existent membership level, no role key is added to the update payload, causing wp_update_user() to preserve the target user's existing role — including administrator — making full privilege escalation a direct consequence of the takeover. Critical CVSS 9.8 CVE-2026-13196Nozomi Networks Labs identified a CWE-787: Out-of-bounds Write vulnerability in the process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker with device configuration access to write attacker-controlled data outside the bounds of the process-image buffer and corrupt adjacent kernel memory, resulting in kernel memory corruption and denial of service, by supplying crafted device configuration data and crafted input through the piControl character device.NVD analysis in progress High CVSS 7.3 CVE-2026-13197Nozomi Networks Labs identified a CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the configuration and process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker to trigger use-after-free and invalid pointer dereferences on kernel configuration objects, resulting in kernel memory corruption and denial of service, by issuing concurrent crafted requests through the piControl character device.NVD analysis in progress High CVSS 7.3 CVE-2026-15205The Paymob for WooCommerce WordPress plugin before 4.1.9 does not properly sanitise a client-supplied identifier before using it in a SQL query within its public, unauthenticated payment callback, and performs this query before verifying the payment provider's HMAC signature. This allows unauthenticated attackers to perform SQL injection and read arbitrary data from the database — including user credentials and other secrets — through both in-band (reflected) and time-based blind extraction.NVD analysis in progress High CVSS 8.6 CVE-2026-16708IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to obtain sensitive information due to external control of system configuration.Ibm Db2 Mirror For I High CVSS 8.3 CVE-2026-16772In Akaunting versions <= 3.1.21, low‑privileged authenticated users can modify their own account to assign themselves the admin role ID, granting full administrator privileges. This vulnerability is caused by a flaw in the `UpdateUser` job, which processes user-supplied role assignments via an unconditional `roles()->sync()` call without verifying whether the caller is authorized to manage roles. Users only require the default `update-auth-profile` permission to access the self-update path and assign themselves as admins. The API endpoints are properly permission‑gated and are not affected by this issue.NVD analysis in progress High CVSS 8.1 CVE-2026-16879IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization using user-supplied input.Ibm Db2 Mirror For I High CVSS 8.8 CVE-2026-16915IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper input validation.Ibm Db2 Mirror For I High CVSS 7.5 CVE-2026-17081IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to write arbitrary files due to improper limitation of a pathname to a restricted directory.Ibm Db2 Mirror For I High CVSS 8.2 CVE-2026-17175IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper authentication enforcement.NVD analysis in progress High CVSS 7.5 CVE-2026-17177IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to uncontrolled recursion.Ibm Db2 Mirror For I High CVSS 7.5 CVE-2026-17179IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to cause a denial of service due to command injection.NVD analysis in progress High CVSS 8.5 CVE-2026-17181IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to write files to arbitrary locations due to path traversal.Ibm Db2 Mirror For I Critical CVSS 9.3 CVE-2026-17182IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to bypass authentication and obtain or alter sensitive information due to improper validation of request URI path segments.Ibm Db2 Mirror For I Critical CVSS 9.8 CVE-2026-17184IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary code due to external control of file name or path.Ibm Db2 Mirror For I Critical CVSS 9.8 CVE-2026-17186IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary CL commands due to improper neutralization of special elements in a command.Ibm Db2 Mirror For I Critical CVSS 9.9 CVE-2026-18039The Essential Addons for Elementor WordPress plugin before 6.7.2 does not prevent user-supplied registration fields from overwriting reserved account attributes, allowing unauthenticated attackers to register an account with an arbitrary role, including administrator, on sites where a custom profile field with a particular label has been configured.NVD analysis in progress High CVSS 8.1 CVE-2026-18109The W3 Total Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Author Name in all versions up to, and including, 2.10.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is only exploitable when the Lazy Load Images feature of W3 Total Cache is enabled, as the unsafe re-emission occurs exclusively within the LazyLoad mutator's img tag rewriting step. High CVSS 7.2 CVE-2026-18178IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to delete arbitrary files due to path traversal.Ibm Db2 Mirror For I High CVSS 8.1 CVE-2026-18554IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper limitation of a pathname to a restricted directory.Ibm Db2 Mirror For I High CVSS 7.5 CVE-2026-19188A critical OS command injection vulnerability has been identified in the
Haiwell IoT Cloud HMI Gateway product. The vulnerability exists in the
Net Check feature accessible via the /setting endpoint. The cmdPing
Socket.io event fails to properly sanitize user-supplied input before
passing it to the underlying operating system, allowing an attacker to
inject and execute arbitrary OS commands with root privileges.NVD analysis in progress Critical CVSS 10 CVE-2026-19626A remote code execution vulnerability exists in Tenable Security Center's report generation functionality. An authenticated, non-administrative user could exploit this issue by supplying specially crafted input that is later processed unsafely during server-side report rendering, resulting in arbitrary code execution with the privileges of the service account.Tenable Security Center Critical CVSS 9.9 CVE-2026-19628A command injection vulnerability exists in Tenable Security Center. An authenticated administrator could modify application configuration values to achieve arbitrary command execution on the underlying operating system when specific backend operations are triggered.Tenable Security Center High CVSS 7.2 CVE-2026-19629A privilege escalation vulnerability exists in Tenable Security Center that allows a user with "Security Manager" role and "manage user" permission on a single group to modify users belonging to other groups. This bypasses the intended access control restrictions and enables unauthorized cross-group user management.Tenable Security Center High CVSS 8.1 CVE-2026-19635A local privilege escalation vulnerability exists in Security Center. An attacker with write access to a specific configuration file could achieve arbitrary code execution with elevated privileges, without requiring further user or victim interaction.Tenable Security Center High CVSS 8.8 CVE-2026-19679An input validation vulnerability exists in Security Center's file upload handling, where insufficient sanitization of uploaded filenames could contribute to a downstream command injection issue.Tenable Security Center High CVSS 8.8 CVE-2026-19680A SQL injection vulnerability exists in Security Center that could allow an attacker to access unauthorized data from the application's database.Tenable Security Center High CVSS 7.1 CVE-2026-19681An authenticated command injection vulnerability exists in Security Center related to file upload processing. An attacker could exploit this issue by uploading a specially crafted file, potentially resulting in arbitrary command execution on the underlying operating system.Tenable Security Center Critical CVSS 9.9 CVE-2026-19682A command injection vulnerability exists in Security Center where a remote, unauthenticated attacker could exploit this issue to execute arbitrary commands on the underlying operating system with the privileges of the service account.Tenable Security Center Critical CVSS 9.9 CVE-2026-19757A vulnerability was found in Dromara lamp-cloud up to 5.10.0. This vulnerability affects unknown code of the file FileAnyoneController.java of the component File-Upload Controller. Performing a manipulation of the argument bucket/bizType results in path traversal. The attack can be initiated remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. High CVSS 7.3 CVE-2026-19758A vulnerability was determined in dromara lamp-cloud up to 5.10.0. This issue affects some unknown processing of the file FileChunkController.java of the component chunk-check endpoint. Executing a manipulation of the argument Name can lead to path traversal. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. High CVSS 7.3 CVE-2026-19762A vulnerability was found in DTStack Taier 1.4.0. Affected by this vulnerability is the function Paths.ge of the file FileChunkController.java of the component Chunk-Check Endpoint. The manipulation of the argument Name results in path traversal. The attack may be launched remotely. The exploit has been made public and could be used. High CVSS 7.3 CVE-2026-19764A vulnerability was identified in Raisecom Communication Command and Dispatch Management Platform up to 7.6.5. This affects an unknown part of the file /app/users/getpwd.php. Such manipulation of the argument sip leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.3 CVE-2026-19768Improper control of generation of code ('Code Injection') in the settings feature in Devolutions PowerShell Universal 2026.2.3 and earlier allows an authenticated user with settings management permission to execute arbitrary PowerShell code via a crafted setting value that is not properly escaped when written to the settings configuration file.NVD analysis in progress High CVSS 8.1 CVE-2026-19771A vulnerability was identified in Baicells EG3661M BaiCE_BQ6_2.0.5.3_NA. This impacts an unknown function of the file /cgi-bin/luci of the component LuCI Web Interface. Such manipulation of the argument MaxHops/Timeout/Size leads to os command injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. High CVSS 7.2 CVE-2026-19788A vulnerability was found in Tenda AC1206 15.03.06.23_multi_TD01. This affects the function set_device_name of the file /goform/SetOnlineDevName of the component httpd web management interface. The manipulation of the argument devName results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. High CVSS 8.8 CVE-2026-19789A vulnerability was determined in Tenda AC1206 15.03.06.23_multi_TD01. This vulnerability affects the function set_wl_guest_iplist of the file /goform/WifiGuestSet of the component httpd web management interface. This manipulation of the argument shareSpeed causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. High CVSS 8.8 CVE-2026-19790A vulnerability was identified in Tenda G0 up to 20260625. This issue affects the function formSetPortMirror of the file /goform/module of the component httpd Web Management Interface. Such manipulation of the argument portMirrorMirroredPorts leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. High CVSS 8.8 CVE-2026-19791A weakness has been identified in Tenda G0 up to 20260625. The affected element is the function addStaticRoute of the file /goform/module of the component httpd web management interface. Executing a manipulation of the argument staticRouteNet can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. High CVSS 8.8 CVE-2026-19792A security flaw has been discovered in Tenda G0 up to 20260625. Impacted is the function setPortMapping of the file /goform/module of the component httpd web management interface. Performing a manipulation of the argument portMappingServer/porMappingtInternal/portMappingExternal results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. High CVSS 8.8 CVE-2026-19794The WP-Stats plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 2.56 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. High CVSS 7.2 CVE-2026-19811A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument Comment results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. High CVSS 8.8 CVE-2026-19812A weakness has been identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component product.so. This manipulation of the argument File causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. High CVSS 8.8 CVE-2026-19813A security vulnerability has been detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Such manipulation of the argument Comment leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. High CVSS 8.8 CVE-2026-19814A vulnerability was detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setMacQos of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Performing a manipulation of the argument macAddress results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. High CVSS 8.8 CVE-2026-19815A flaw has been found in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected by this vulnerability is the function setParentalRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Executing a manipulation of the argument urlKeyword can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. High CVSS 8.8 CVE-2026-19821A vulnerability was determined in Tenda AC12 15.03.06.23_multi_TD01. This vulnerability affects the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg of the component httpd web management interface. This manipulation of the argument rebootTime causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. High CVSS 8.8 CVE-2026-19822A vulnerability was identified in Tenda W20E 15.11.0.6(1068_1546_841)_CN_TDC. This issue affects the function lstAdd of the file /goform/editQos of the component QoS Edit. Such manipulation of the argument qosListConnecttedNum leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. High CVSS 8.8 CVE-2026-19823A security flaw has been discovered in Tenda W20E 15.11.0.6(1068_1546_841)_CN_TDC. Impacted is the function formQOSRuleDel of the file /goform/delQos of the component QoS Rule Deletion. Performing a manipulation of the argument qosIndex results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. High CVSS 8.8 CVE-2026-19824A weakness has been identified in Tenda W20E 15.11.0.6(1068_1546_841)_CN_TDC. The affected element is the function ipMacBindListStore of the file /goform/addIpMacBind. Executing a manipulation of the argument IPMacBindRule can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. High CVSS 8.8 CVE-2026-19825A security vulnerability has been detected in SourceCodester Simple Client Management System 1.0. The impacted element is an unknown function of the file /classes/Master.php?f=save_service. The manipulation of the argument ID leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. High CVSS 7.3 CVE-2026-19826A vulnerability was detected in alldatacenter alldata up to 0.6.8. This affects the function Hessian2Input.readObject of the file /serialize/impl/HessianSerializer.java of the component xxl-rpc Listener. The manipulation results in deserialization. The attack may be performed from remote. The exploit is now public and may be used. The project closed the issue report as "not planned" without any further explanation. High CVSS 7.3 CVE-2026-19844A vulnerability was found in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component ipv6.so. Performing a manipulation of the argument radvdinterfacename results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. High CVSS 8.8 CVE-2026-19845A vulnerability was determined in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function setStaticDhcpConfig of the file /cgi-bin/cstecgi.cgi of the component lan.so. Executing a manipulation of the argument Comment can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. High CVSS 8.8 CVE-2026-19846A vulnerability was identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument url leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. High CVSS 8.8 CVE-2026-19847A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component wps.so. The manipulation of the argument pin results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. High CVSS 8.8 CVE-2026-19870Authorization Bypass Through User-Controlled Key in the payroll module in Roskus Prospero Flow CRM before 5.15.10 allows authenticated users holding the read payroll permission to view the salary and banking details of employees of any other company in the instance, and users holding the create payroll permission to create payroll records attributed to another company's employees, because the listing query is not scoped to the caller's company and the employee identifier is validated for global existence rather than company membershipNVD analysis in progress High CVSS 8.6 CVE-2026-19871Use of Hard-coded Credentials in the human resources component in Roskus Prospero Flow CRM before 5.15.9 allows unauthenticated remote attackers to authenticate as any employee onboarded through the standard flow, knowing only their email address, because the employee save controller falls back to the literal password "changeme" and the onboarding form provides no password field.NVD analysis in progress Critical CVSS 9.3 CVE-2026-19884In Eclipse Theia versions up to and including 1.69.0, opening a folder starts source control integration without requiring the user to trust the folder first. This affects applications built on Theia that include the git integration, such as the Theia IDE. Both Theia's own `@theia/git` extension and the builtin VS Code `git` extension run git commands such as `git status` as soon as a repository is detected. Since git honors repository-local configuration, a folder containing an attacker-controlled `.git/config` with `core.fsmonitor` (or a comparable hook-like setting) causes the configured command to be executed. The configuration can be delivered by burying a bare repository inside a regular repository (OVE-20210718-0001), so cloning an attacker-supplied repository and opening it in a Theia-based application is sufficient to execute arbitrary commands with the privileges of the user, without any confirmation prompt.
As of 1.70.0, plugins that declare `capabilities.untrustedWorkspaces.supported: false`, which includes the builtin git extension, are no longer loaded or activated in an untrusted workspace, and the deprecated `@theia/git` extension has been removed, so no git command is executed against an untrusted folder.NVD analysis in progress High CVSS 8.4 CVE-2026-19908PAX Technology Q80 XCB Daemon Missing Authentication Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information and modify configuration on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the XCB daemon. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-30584.NVD analysis in progress High CVSS 7.1 CVE-2026-19909PAX Technology Q80 AIP File Parsing Link Following Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of AIP files. By creating a symbolic link, an attacker can abuse the installer process to write arbitrary files. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30583.NVD analysis in progress High CVSS 7.5 CVE-2026-19910PAX Technology Q80 Application Installer Signature Verification Bypass Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the application installer. The issue results from the lack of proper verification of a cryptographic signature before installing an application. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30585.NVD analysis in progress High CVSS 7.5 CVE-2026-34492External control of file name or path vulnerability in Johnson Controls Airwall allows : File Manipulation.
This issue affects Airwall: before 4.1.NVD analysis in progress High CVSS 7 CVE-2026-45699Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the copydir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. copydir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to track available buffer space using srem and drem for source and destination paths. Incorrect arithmetic causes both srem and drem to underflow to SIZE_MAX. Consequently, boundary checks against strlen(de->d_name) always pass, allowing strcpy() to append filenames into nearly full stack buffers. Version 4.4.3 patches the issue. As a workaround, configure each AFP shared volume to be structured as a single file system, in other words no subdirectory of a shared volume should be a mount point for a different file system.NVD analysis in progress High CVSS 7.5 CVE-2026-46439compliance-trestle is a tooling platform for managing compliance as code. Versions prior to 3.12.2 and 4.0.3 have a Server-Side Template Injection (SSTI) vulnerability exists in the `trestle author jinja` command. The command recursively evaluates rendered templates, allowing an attacker to achieve arbitrary command execution with privileges of the running process by injecting malicious payloads into data fields (such as SSP documents or Lookup Tables). The vulnerability does not require attacker control of the template itself. Only attacker-controlled input data rendered into a trusted template is required. This distinction is critical: the template author may only intend to render plain text (e.g., `Title: {{ ssp.metadata.title }}`), but because of the recursive parsing, the data field itself becomes executable. The vulnerability is caused by recursive re-compilation and re-rendering of already-rendered output. Versions 3.12.3 and 4.0.3 patch the issue.NVD analysis in progress High CVSS 7.8 CVE-2026-46603VP8L decoding in golang.org/x/image/vp8l can allocate an excessive amount of memory when processing a crafted VP8L image containing many unused Huffman tree groups. This allows a remote attacker to cause a denial of service via memory exhaustion.NVD analysis in progress High CVSS 7.5 CVE-2026-48528Metacat is data repository software that helps researchers preserve, share, and discover data. Metacat versions 2.0.0 through 3.4.0 contain an unauthenticated SQL injection vulnerability in the `/cn/v1/object` and `/cn/v2/object` REST API endpoints due to unsanitized user input that can be passed through to the backend SQL database. The `nodeId` parameter can be modified to inject SQL commands, and the results are returned in error messages. Metacat appends the user-supplied data into the sql query without sanitization or parameterization. This allows extraction of arbitrary data from the underlying PostgresQL database, fully exposing protected information to the attacker. This is accomplished by leveraging the error reporting mechanisms in Metacat, where SQL error responses are mirrored back to the caller in the XML error message returned by Metacat. One approach, for example, is to use the PostgreSQL `CAST` function to generate an error with the results of an arbitrary subquery, which is then injected into the XML error message returned by Metacat. Attackers do not need to be authenticated to execute the attack. In addition, arbitrary SQL statements that insert, update, and delete data in the Metacat database can be executed, resulting in full compromise of all data in the database. Full proof of concept attacks have been developed and verified for these vulnerabilities. The impact of this vulnerability is critical for Metacat deployments in the DataONE network where information from the database can be exfiltrated, added, changed, or deleted. This includes management information about the data catalog, access log information about who accessed data, identifying information about individuals including their ORCID identifier and client IP address, access control information about who should be able to access and modify data, and other critical internals of the data system. This sql injection vulnerability was remediated fully in Metacat version 3.4.1. If upgrading to Metacat 3.4.1 isn't immediately possible, most deployments can mitigate the issue by disabling the `/cn` REST endpoints in the webapp deployment. This API is not needed or used by member repositories in the DataONE network, as it is only used by the DataONE Coordinating Node deployments. Consequently, this API can be disabled without reduction of functionality for most deployments. To disable the vulnerable endpoints, simply remove the servlet and servlet-mapping for the `/cn` endpoints in the servlet engine associated with the two servlets, `edu.ucsb.nceas.metacat.restservice.v1.CNRestServlet` and `edu.ucsb.nceas.metacat.restservice.v2.CNRestServlet`. For example, in Tomcat, remove the relevant `servlet-mapping` elements from the application web.xml file in Metacat.NVD analysis in progress Critical CVSS 9.8 CVE-2026-49457erlang_quic is a pure Erlang QUIC implementation. Prior to version 1.4.4, the QUIC client did not authenticate the server during the TLS 1.3 handshake. The CertificateVerify signature was not checked, the certificate chain was not validated, and the hostname was not compared against the certificate, so `verify` was effectively a no-op on the client. A man-in-the-middle on the network path could present any certificate and impersonate any server, defeating the confidentiality and integrity of the connection. HTTP/3 uses the same client and was equally affected. Handshakes authenticated by a PSK (session resumption) are not affected, because the peer is authenticated by the PSK binder and no certificate is sent. This is fixed in 1.4.4. The client now verifies the CertificateVerify signature, validates the certificate chain against the trust store (`cacerts` option, the operating system store by default), and checks the hostname. Client `verify` now defaults to on; set `verify => false` to accept any certificate (for example a self-signed test server). No known workarounds are available before 1.4.4. `verify => true` had no effect, and inspecting the certificate after connecting does not help because without the signature check the peer is never proven to own the certificate it presents.NVD analysis in progress Critical CVSS 9.1 CVE-2026-49986The Cortex MCP server (`neuro-cortex-memory`), a cross-platform persistent memory MCP, prior to version 3.17.1 treats the `CLAUDE_PROJECT_DIR` environment variable — automatically set by Claude Code to the currently open project directory — as a trusted Cortex developer checkout. When the `open_visualization` tool is invoked, `_find_dev_source()` resolves the user's active project directory as a candidate Cortex source root. The only validation performed by `_is_cortex_root()` is a check for the presence of an `mcp_server/` subdirectory and a `ui/unified-viz.html` file. An attacker who places these two marker files in a malicious repository can cause Cortex to execute an arbitrary `mcp_server/server/visualize_bootstrap.py` from that directory via `subprocess.run([sys.executable, ...])`, achieving code execution with the privileges of the victim's local user process. Version 3.17.1 fixes the issue.NVD analysis in progress High CVSS 7.1 CVE-2026-49989CrateDB is a distributed SQL database. Prior to versions 6.2.8 and 6.3.2, any authenticated user can read or delete any blob whose SHA-1 digest they know, and can plant new blobs unconditionally, in any blob table, regardless of `GRANT`s. CrateDB has two ways to access blob storage: SQL (`SELECT ... FROM blob.<table>` and friends) and the blob HTTP API (`GET|PUT|DELETE /_blobs/{table}/{digest}`). The SQL path goes through `AccessControl`, which is what enforces privilege grants; that's why `SELECT digest FROM blob.secret_blobs` fails for a user who has no grants on the table. The HTTP path authenticates the request but never asks `AccessControl` whether the authenticated user is allowed to touch the table. So a user with no grants gets `MissingPrivilegeException` from SQL and `200 OK` plus the blob bytes from `GET /_blobs/secret_blobs/<digest>`. Deployments that don't use `BLOB TABLE` are unaffected. Authentication itself still works; the bug is strictly that being authenticated as anyone is treated as sufficient for any blob op. Versions 6.2.8 and 6.3.2 fix the issue.NVD analysis in progress High CVSS 7.1 CVE-2026-50027mcp-memory-service is a semantic memory layer for AI applications. Prior to 10.67.1, all HTTP routes under /api/documents/* in mcp-memory-service are served without any authentication dependency, even when the server is configured with an API key (MCP_API_KEY) or OAuth. An unauthenticated remote attacker can upload arbitrary content into the memory store (write), retrieve stored document content (read), and permanently delete memories belonging to authenticated users (delete) — all without supplying any credentials. The /api/memories counterpart correctly enforces authentication, making this an inconsistent and exploitable authentication boundary. This vulnerability is fixed in 10.67.1.NVD analysis in progress Critical CVSS 9.8 CVE-2026-50523Improper neutralization of special elements used in a command ('command injection') in Microsoft PowerShell allows an authorized attacker to execute code locally.Microsoft Powershell High CVSS 7.8 CVE-2026-53970ZeroBrew version 0.3.1 and prior contains a missing integrity verification vulnerability in the Ruby compatibility shim that allows network attackers to execute arbitrary code by substituting malicious content at formula resource or URL-based patch URLs without checksum validation. Attackers can intercept or replace downloads for secondary resource and patch paths in shim.rb, injecting attacker-controlled build steps or source tree modifications that execute during source builds via 'zb install --build-from-source' without any integrity warning.NVD analysis in progress High CVSS 7.5 CVE-2026-63361LimeSurvey Community Edition 7.0.5 contains an authenticated reflected cross-site scripting vulnerability in the HTML editor popup endpoint. The text and name query parameters are passed through a blacklist sanitizer and then rendered without context-appropriate output encoding.NVD analysis in progress High CVSS 8.5 CVE-2026-63700Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Incorrect Default Permission vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation.Dell Wyse Management Suite High CVSS 7.8 CVE-2026-63701Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Improper Deserialization of Untrusted Data vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation.Dell Wyse Management Suite High CVSS 7.8 CVE-2026-64887Use of hard-coded cryptographic key vulnerability in Johnson Controls Airwall allows : Cryptanalytic Attack.
This issue affects Airwall: before 4.1.NVD analysis in progress High CVSS 7 CVE-2026-66270Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution.Dell Wyse Management Suite High CVSS 7.2 CVE-2026-66271Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution.Dell Wyse Management Suite High CVSS 7.2 CVE-2026-67365Joomla Extension - icagenda.com - Unauthenticated SQL injection in iCagenda < 4.0.0-4.0.11 - Unauthenticated SQL injection in mod_icagenda_calendar (iCagenda), reachable via com_ajax with no session, token or account.NVD analysis in progress Critical CVSS 9.2 CVE-2026-69101Datavane TIS v5.0.0 contains an XML external entity (XXE) injection vulnerability that allows authenticated attackers to perform server-side request forgery and out-of-band file exfiltration by supplying a crafted taskScript payload to the doEditWorkflow endpoint, which processes XML through an unhardened DocumentBuilderFactory with external entities and DTD loading enabled. Attackers can send a malicious XML document containing an external DTD reference to the edit_workflow action, causing the server to issue outbound HTTP requests to attacker-controlled infrastructure and exfiltrate local files readable by the TIS process user, including configuration files and Derby database credentials.NVD analysis in progress High CVSS 7.7 CVE-2026-69414Microsoft is aware of an elevation of privilege in the Microsoft Malware Protection Engine in Microsoft Defender publicly referred to as "ShieldBreak ".
We are working to provide a high quality security update that addresses this vulnerability. We will provide information in this CVE when the update is available.Microsoft Malware Protection Engine High CVSS 7.8 CVE-2026-71571Joomla Extension - icagenda.com - Authenticated SQL injection via unescaped numeric filter in iCagenda < 2.0.0-4.0.11 - Backend operators with permissions to access iCagenda could inject SQL.NVD analysis in progress High CVSS 8.6 2501–2600 / 11286 CVE